Difference between revisions of "User talk:Aleric Inglewood"

From Second Life Wiki
Jump to navigation Jump to search
(Replaced content with "This was moved elsewhere...")
 
(139 intermediate revisions by the same user not shown)
Line 1: Line 1:
== About Coordinate Systems and Rotations ==
This was moved elsewhere...
 
=== The four coordinate systems ===
 
There are four coordinate systems that are related to LSL programming:
# World coordinates
# Region coordinates
# Object coordinates (root prim coordinates)
# Prim coordinates
 
The World coordinates refer to the map, and allow to include the sim
in the coordinates, or refer to void water.
 
Region coordinates are relative to a given sim.
The origin is in the South/West corner at height 0.
The North/East corner then is 256, 256 and a Z coordinate
for the height up to 4096 meter (on opensim you can go even
higher).
 
Object coordinates are relative to the root prim. Hence, if the object
is moved or rotated then the orientation of a child prim, when given
in object coordinates, doesn't change. In LSL "local position" and
"local rotation" refer to this coordinate system. "local" means
relative to the root prim.
 
Prim Coordinates are relative to a given prim. If this prim is the root
prim then the Prim Coordinates are the same as the Object Coordinates.
For example, if a child prim is a cube with a size of 1,1,1 and one
red surface where the center of that surface is at 1,0,0 then it will
still be at 1,0,0 no matter how you move or rotate that child prim
(relative to the other linked prims).
 
=== Positions ===
 
A different position of the origin of a coordinate system is easy to understand:
You can think of positions as vectors that start in the origin of the
coordinate system that they are given in and end in the point that they
refer to. While the length of the vector is independent of the rotation of
the coordinate system, the three coordinates are not; but a mental picture
of an arrow doesn't have little numbers for three coordinates, so that
picture works independent of the rotation too.
 
Since the rotation of the World Coordinate system and the Region Coordinate
system is the same (X, Y and Z axis are parallel of both), and since
World Coordinates aren't used in many LSL functions to begin with, we
will ignore World Coordinates for now and only refer to Region Coordinates,
or say "global" when we mean Region Coordinates.
 
=== Rotations ===
 
An LSL rotation internally stores a vector that is the axis around which
to rotate and the angle of the rotation around that axis.
Let '''V''' = <u, v, w> be the normalized vector (that is, with length 1) around
which we rotate and let a be the angle around which we have to rotate.
Then the LSL rotation is a quaternion stored as r = <x, y, z, s> = < '''V''' * sin(a/2), cos(a/2) >.
Thus, r.x = x * sin(a/2), and r.s = cos(a/2) etc. Note that the quaternion
is also normalized.
Also note that there is a duality here because inverting '''V''' (making it point the
opposite way) and inverting the angle gives the same rotation; r and -r have
different values but are the same rotation.
Also note that if you don't rotate at all (a == 0) then it doesn't matter
what axis '''V''' you pick, which is apparent because '''V''' drops out since sin(0) = 0.
The quaternion <0, 0, 0, 1> is the ZERO_ROTATION quaternion.
 
The point of this technical story is to show that for an LSL rotation to
make sense in terms of orientation, you need to be able to express a vector
in three coordinates (u, v, w above): the axis around which we rotate is
expressed relative to the X-, Y- and Z-axes of the coordinate system. Hence,
it is the orientation of the X-, Y- and Z-axes that defines the meaning
of a rotation in LSL.
 
In terms of a mental picture the origin with the (orientation of the) three axis,
the red X-axis, the green Y-axis and the blue Z-axis is all the reference
we need, combined with a vector for position or a quaternion for rotation.
 
When you edit an object, the viewer shows either 'World' or 'Local' axes, but
really the 'World' axes show the wrong origin, shifted to an averaged center
of the object, because if the origin was drawn at (0, 0, 0) you'd most likely
not see it. The 'Local' ruler shows the correct coordinate system for the
selected prim as its Prim Coordinate System. Selecting the root prim with
'Local' ruler on then shows the Object Coordinate System.
 
=== The Dimension Of Rotations ===
 
As said before, given some coordinate system, any point in space can
be represented with a vector. Obviously space is three dimensional,
and thus vectors exists of three real values:
one needs three distinct floating point numbers, the x coordinate,
the y coordinate and the z coordinate to uniquely
identify a position in a given coordinate system.
 
However, if one limits oneself to only normalized vectors, vectors
with a length of one, then those represent all points on the surface
of a sphere with radius 1.
A surface is obviously two dimensional, so it should be possible to
uniquely identify any point on the surface of such a sphere with
only two floating point numbers.
 
One might think that selecting just two coordinates of the three of
the vector will suffice because the third is fixed by the length requirement,
but that only works for half spheres; for example, if x and y are known
then z can still be either plus the square root of x squared plus y squared,
''or'' minus that value.
 
Instead, a better choice would be the [http://mathworld.wolfram.com/SphericalCoordinates.html spherical coordinate system]
and express the unit vectors with the two the angular coordinates φ and θ,
where φ is the angle between the vector and the positive Z axis, and
θ the angle that the projection of the vector on to the X,Y plane makes
with the positive X axis. In other words, starting with a unit vector
along the positive Z-axis, one can obtain the required point on
the surface of the sphere by first rotating this vector around the
Y axis (towards the positive X axis) by an angle of φ and then rotating
the result around the Z-axis by an angle of θ. Note that in both cases
the rotations are counter-clockwise when one looks at it from the positive
side of the axis that one rotates around (towards the origin).
 
What we just did was expressing a unit vector in terms of two rotations:
one around the Z axis and one around the Y axis; and indeed every rotation
can be expressed as two rotations around those two axis (or really, any
two arbitrary axes, as long as they are independent (not parallel)).
 
It is therefore possible to represent unit vectors (aka, a ''direction'')
with a rotation, as both are two dimensional. The mental picture here is
that any unit vector can be expressed as some fixed unit vector (for example
the one pointing along the positive Z axis, but any other would do as well)
and the rotation needed to turn that 'starting vector' into the unit vector
that one wants to represent. The other way around almost works as well, with the
exception of the starting vector itself, as that can be expressed by any arbitrary
rotation around itself, so that information was lost and it is not possible
to know which of those rotations was used. In fact, any vector
close to the starting vector would give inaccurate results in the light
of floating point round off errors and is not a good way to represent
a rotation. Of course, the two dimensional vector (θ, φ) would be excellent
to represent both: the unit vector, as well as any rotation; but LSL stores
vectors in x, y, z coordinates, not in spherical coordinates.
 
=== Converting Between Coordinate Systems ===
 
Consider a child prim of an object that is not the root prim and express
its position with the vector oc_pos, and its orientation with the rotation oc_rot,
both relative to the Object Coordinates System.
 
A script inside that prim can easily obtain those values:
 
vector oc_pos = [[llGetLocalPos]]();
rotation oc_rot = [[llGetLocalRot]]();
 
The prefix 'oc_' stands for Object Coordinates and is used to make clear
relative to which coordinate system the x, y and z values of both
variables are. Remember that also the rotation contains a vector
(the axis around which we rotate), so from now on we'll talk about
'coordinates' relative to a coordinate system for both, the position
as well as the rotation, where the coordinates refer to the x, y and z
components of the position and the rotation. For example, the first
sentence of this paragraph will read "...express its position with the
vector oc_pos, and its orientation with the rotation oc_rot, ''both in Object Coordinates''."
 
'''Note that''' one has to be careful here, because a script in the
root prim of the object will '''''not''''' obtain
Object Coordinates but instead Region Coordinates!
The reason is that the 'Local' functions return coordinates relative to
the 'parent' coordinate system, where the parent of a non-root prim is the root prim,
but the parent of the root prim is the region (or avatar in case
of an attachment). The position and rotation of the root prim in
Object Coordinates is trivial (ZERO_VECTOR and ZERO_ROTATION respectively).
 
Back to the script in the child prim. It can also easily obtain its position
and rotation in Region Coordinates:
 
vector rc_pos = [[llGetPos]]();
rotation rc_rot = [[llGetRot]]();
 
Both sets, (oc_pos, oc_rot) and (rc_pos, rc_rot) refer to the same thing,
so it should be possible to convert them into each other.
 
One can do this by looking at the orientation (position and rotation) of
one coordinate system relative to the other and expressed
in the coordinates of that other. The position and rotation
of the Object Coordinate System relative to the Region Coordinate
System, and in Region Coordinates, could be obtained as follows:
 
vector rc_ocs_pos = [[llGetRootPosition]]();
rotation rc_ocs_rot = [[llGetRootRotation]]();
 
As indicated by the 'rc_' prefix, these are again in Region Coordinates.

Latest revision as of 18:02, 27 March 2014

This was moved elsewhere...

Retrieved from "https://wiki.secondlife.com/w/index.php?title=User_talk:Aleric_Inglewood&oldid=1188840"