Difference between revisions of "A Basic LSL Tutorial"

From Second Life Wiki
Jump to: navigation, search
m
m (minor grammer and spelling corrections to improve clarity)
Line 96: Line 96:
 
http://www.lslwiki.net/lslwiki/wakka.php?wakka=color
 
http://www.lslwiki.net/lslwiki/wakka.php?wakka=color
  
If it was a linked object you could use llSetLinkColor, which its layout is  
+
If it was a linked object you could use llSetLinkColor; its layout is  
 
llSetLinkColor(integer linknumber, vector color, integer face).
 
llSetLinkColor(integer linknumber, vector color, integer face).
 
Your script should look something like this:
 
Your script should look something like this:
Line 212: Line 212:
 
'''Task 7''':
 
'''Task 7''':
 
-------
 
-------
Now let's move onto something more tricky, as you understand a bit about keys we will make out object
+
Now let's move onto something more tricky. As you understand a bit about keys we will make our object
only respond when the owner clicks the object, this is called a if statement.
+
only respond when the owner clicks the object. This is called an if statement.
 
To do this we will need to use the functions llGetOwner() and llDetectedKey(0);, llGetOwner will
 
To do this we will need to use the functions llGetOwner() and llDetectedKey(0);, llGetOwner will
 
return your key UUID and llDetectedKey(0) when put under the touch event will return the key of who is
 
return your key UUID and llDetectedKey(0) when put under the touch event will return the key of who is
clicking/touching your object. So firstly lay it out your script like this:
+
clicking/touching your object. So firstly lay out your script like this:
  
 
<lsl>
 
<lsl>
Line 240: Line 240:
 
</lsl>
 
</lsl>
  
If you want it to do something when someone else other than the owner touches it, use a else statement.
+
If you want it to do something when someone else other than the owner touches it, use an else statement.
You can do this by, laying out your script like this:
+
You can do this by laying out your script like this:
  
 
<lsl>
 
<lsl>
Line 269: Line 269:
 
'''Task 8''':
 
'''Task 8''':
 
-------
 
-------
Now let's try make a object do something when you say something, to do this
+
Now let's try make an object do something when you say something, to do this
 
we will have to use a llListen function, its layout is this
 
we will have to use a llListen function, its layout is this
 
llListen(integer channel, string name, key id, string msg);
 
llListen(integer channel, string name, key id, string msg);
Line 389: Line 389:
 
'''TASK 10''':
 
'''TASK 10''':
 
--------
 
--------
Like when editing a object you can make it Phantom, Physical...
+
Like when editing an object, you can make it Phantom, Physical...
 
You can also do this with scripting, the function you have to use to do this is
 
You can also do this with scripting, the function you have to use to do this is
 
llSetStatus, its layout is llSetStatus(integer status, integer value);, so if i wanted
 
llSetStatus, its layout is llSetStatus(integer status, integer value);, so if i wanted

Revision as of 14:04, 5 January 2013

Basic Tutorial on LSL. By James Benedek



When you create a New Script from within the Content tab of a prim or from the context menu of your inventory, the system writes a simple script with the following lines of LSL code: <lsl> default {

   state_entry()
   {
       llSay(0, "Hello, Avatar!");
   }
   touch_start(integer total_number)
   {
       llSay(0, "Touched.");
   }

} </lsl>

This script will basically chat "Hello, Avatar!" on the public channel when it is created and will then chat "Touched." on the same public channel when an avatar touches the prim the script is in.

Errors and how to fix them?


If you get an error while scripting at any time, it will usually be that you have missed out a ; at the end of a function or a { or a } after or before an event. This is the most common error (a syntax error). Sometimes this may not be the case though.

Basic terms:


LSL Functions are shown as red within the Script Editor's composing window.

LSL Events are shown in blue.

TRUE and FALSE are Boolean variables. FALSE is equal to the integer 0 and TRUE is equal to the integer 1.

DATA Types

A String is a string of alphanumeric characters surrounded by quotation marks, (eg. "Hello Bill").

An Integer is a whole number between −2,147,483,648 and +2,147,483,647, which includes 0.

A Float is a number with a decimal fraction like 1.0 or 1.000000 depending on the precision you need in your calculations.

A Vector is a set of three floats enclosed in < pointy brackets > like so: <0.0, 0.0, 0.0>. They can represent colours and positions.

A Key is a randomly generated Universally Unique Identifier (UUID). This specialized string consists of 32 hex characters with four dashes.


TASK 1:


Let's begin by learning an easy task first by making the box say something else when you touch/click it. You can do this by editing the "llSay(0, "Touched.");" line within the touch_start event. Just edit the string between the quote marks. The function llSay()'s format is interpreted as meaning: llSay(Channel number to transmit the text, "string of text to send");

llSay is not the only communication function within the LSL. You can also try out:

llShout(Channel, "SHOUT STUFF");//can be heard 100m away from originating script llWhisper(Channel, "WHISPER STUFF");//can be heard 10m distance llOwnerSay("SAY STUFF TO YOU ONLY"); llRegionSay(Channel, "REGION SAY STUFF");//can be heard within the entire region


TASK 2:


Let's just add some information after this explaining what it each thing does, you can do this by adding // and anything after it will appear orange, this is a comment. Your script should look something like this:

<lsl> default { // when the script has been saved (only in default) or when re-entering this state

   state_entry()
   {
   //  PUBLIC_CHANNEL has the integer value 0
       llSay(PUBLIC_CHANNEL, "Hello, Avatar!");
   }

// when someone starts touching the prim

   touch_start(integer num_detected)
   {
       llSay(PUBLIC_CHANNEL, "Touched.");
   }

} </lsl>

TASK 3:


Let's now try make it change its color when we click it, the function we will need is llSetColor, its layout is like this llSetColor(vector color, integer face); this basically means if i wanted the cube to be red i would use the vector <1,0,0>, green <0,1,0>, blue <0,0,1>. For a full color chart see the link below:

http://www.lslwiki.net/lslwiki/wakka.php?wakka=color

If it was a linked object you could use llSetLinkColor; its layout is llSetLinkColor(integer linknumber, vector color, integer face). Your script should look something like this:

<lsl> default { // when the script has been saved (only in default) or when re-entering this state

   state_entry()
   {
   //  PUBLIC_CHANNEL has the integer value 0
       llSay(PUBLIC_CHANNEL, "Hello, Avatar!");
   }

// when someone starts touching the prim

   touch_start(integer num_detected)
   {
   //  color all faces red
       llSetColor(<1.0, 0.0, 0.0>, ALL_SIDES);
   }

} </lsl>


TASK 4:


Let's now make it have text appear over it, you can do this by using the function llSetText, its layout is llSetText(string text, vector color, float alpha). Basically if you do this llSetText("HELLO CAN YOU READ THIS",<1,0,0>,1); will appear as HELLO CAN YOU READ THIS in the colour red. Alpha is the transparency, if you did llSetText("HELLO CAN YOU READ THIS",<1,0,0>,0); you wouldn't be able to see it. 0 = high transparency, 0.5 = in the middle, 1 = no transparency. Your script should look something like this:

<lsl> default { // when the script has been saved (only in default) or when re-entering this state

   state_entry()
   {
   //  PUBLIC_CHANNEL has the integer value 0
       llSay(PUBLIC_CHANNEL, "Hello, Avatar!");
   }

// when someone starts touching the prim

   touch_start(integer num_detected)
   {
   //  green and opaque floattext
       llSetText("Nice to meet you!", <0.0, 1.0, 0.0>, 1.0);
   }

} </lsl>

TASK 5:


Now that you understand alpha we shall make our object disappear! To do this we will use the function llSetAlpha, its layout is llSetAlpha(float alpha, integer face). llSetAlpha(0, ALL_SIDES); would make all the faces of the object transparent. If it was a linked object you could use llSetLinkAlpha, which its layout is llSetLinkAlpha(integer linknumber, float alpha, integer face). Your script should look something like this:

<lsl> default { // when the script has been saved (only in default) or when re-entering this state

   state_entry()
   {
   //  PUBLIC_CHANNEL has the integer value 0
       llSay(PUBLIC_CHANNEL, "Hello, Avatar!");
   }

// when someone starts touching the prim

   touch_start(integer num_detected)
   {
   //  set all faces to transparent
       llSetAlpha(0.0, ALL_SIDES);
   }

} </lsl>


Task 6:


Let's try make our object texture itself, to do this we will use the function llSetTexture, its layout is llSetTexture(string texture, integer face).You can do this two ways, you can place a texture inside the object or use a UUID. To make it change to a texture you have placed inside the object, do it like this llSetTexture("NAME OF TEXTURE", ALL_SIDES); If you want to use a UUID, find a texture in your inventory, right click it > copy asset UUID, then paste the UUID in the "" so it looks like this llSetTexture("j4m3s000-0000-0000-0000-b3n3d3k00000", ALL_SIDES); If it was a linked object you could use llSetLinkTexture, which its layout is llSetLinkTexture(integer linknumber, string texture, integer face); Your script should look something like this:

<lsl> default { // when the script has been saved (only in default) or when re-entering this state

   state_entry()
   {
   //  PUBLIC_CHANNEL has the integer value 0
       llSay(PUBLIC_CHANNEL, "Hello, Avatar!");
   }

// when someone starts touching the prim

   touch_start(integer num_detected)
   {
   //  apply texture within contents of the same prim
       llSetTexture("name of texture", ALL_SIDES);
   }

} </lsl>

Task 7:


Now let's move onto something more tricky. As you understand a bit about keys we will make our object only respond when the owner clicks the object. This is called an if statement. To do this we will need to use the functions llGetOwner() and llDetectedKey(0);, llGetOwner will return your key UUID and llDetectedKey(0) when put under the touch event will return the key of who is clicking/touching your object. So firstly lay out your script like this:

<lsl> default { // when the script has been saved (only in default) or when re-entering this state

   state_entry()
   {
   //  PUBLIC_CHANNEL has the integer value 0
       llSay(PUBLIC_CHANNEL, "Hello, Avatar!");
   }

// when someone starts touching the prim

   touch_start(integer num_detected)
   {
       key owner = llGetOwner();
       key touchingAvatar = llDetectedKey(0);
       if (owner == touchingAvatar)
           llSay(PUBLIC_CHANNEL, "Touched by owner.");
   }

} </lsl>

If you want it to do something when someone else other than the owner touches it, use an else statement. You can do this by laying out your script like this:

<lsl> default { // when the script has been saved (only in default) or when re-entering this state

   state_entry()
   {
   //  PUBLIC_CHANNEL has the integer value 0
       llSay(PUBLIC_CHANNEL, "Hello, Avatar!");
   }

// when someone starts touching the prim

   touch_start(integer num_detected)
   {
       key owner = llGetOwner();
       key touchingAvatar = llDetectedKey(0);
       if (owner == touchingAvatar)
           llSay(PUBLIC_CHANNEL, "Touched by owner.");
       else
           llSay(PUBLIC_CHANNEL, "Touched by someone else.");
   }

} </lsl>

Task 8:


Now let's try make an object do something when you say something, to do this we will have to use a llListen function, its layout is this llListen(integer channel, string name, key id, string msg); We will firstly place this under the state_entry() event. In this task we will just make it use the public channel, which is 0, and we will make it listen to only you, which requires the llGetOwner() function we used previously. We will then need to use a listen event, its layout is like this listen(integer channel, string name, key id, string message) {, replace the touch event with this. we will then make the object annoy you by it saying "Really?" whenever you type something XD This will involve using a llSay like we used in task 1. Your script should look something like this:

<lsl> default { // when the script has been saved (only in default) or when re-entering this state

   state_entry()
   {
       key owner = llGetOwner();
   //  PUBLIC_CHANNEL has the integer value 0
       llListen(PUBLIC_CHANNEL, "", owner, "");
   }

// when something has been heared

   listen(integer channel, string name, key id, string message)
   {
       llSay(PUBLIC_CHANNEL, "Received: '" + message + "'.");
   }

} </lsl>

To make it only listen for commands not on the public channel, which will be more secret and which is less laggy in complex scripts, you can do this by changing the integer 0 to something like 99, this time use a llOwnerSay instead of a llSay, which should make it secret. Your script should look something like this:

<lsl> default {

   state_entry()
   {
       llListen(99,"",llGetOwner(),"");
   }
   
   listen(integer channel, string name, key id, string message)
   {
       llOwnerSay("Really?");
   }

} </lsl>

To chat in another channel, just type in the chat bar /channel before you type something, in this case it will be "/99 hello" for example.To make it do only certain stuff when you say certain commands we will have to use a if statement, like before but this time we will have to check if the message equals the command, if (message == "Your Command Here"). Your script should look something like this:

<lsl> default {

   state_entry()
   {
       llListen(99,"",llGetOwner(),"");
   }
   
   listen(integer channel, string name, key id, string message)
   {
   if (message == "hello")
   {
       llOwnerSay("Hello to you too!");
   }
   else
   {
       llOwnerSay("INVALID COMMAND");
   }
   }

} </lsl>

To learn more about llListen take a look at:

https://wiki.secondlife.com/wiki/llListen

TASK 9:


Now let's experiment with vectors, and make your object move non physically, to do this we will need to use the function llSetPos, its layout is llSetPos(vector pos); We will also use llGetPos() so we can make it move +1 of its current position. Place the llSetPos function under a touch event with a vector <0,0,1> + llGetPos();. Your script should look something like this:

<lsl> default { // when the script has been saved (only in default) or when re-entering this state

   state_entry()
   {
   //  PUBLIC_CHANNEL has the integer value 0
       llSay(PUBLIC_CHANNEL, "Hello, Avatar!");
   }

// when someone starts touching the prim

   touch_start(integer num_detected)
   {
       vector oldPosition = llGetPos();
       llSetPos(oldPosition + <0.0, 0.0, 1.0>);
   }

} </lsl>

A position vector layout is in the format x,y,z, so <0,0,1> will make it go up 1m. to learn more take a look at:

https://wiki.secondlife.com/wiki/llSetPos

TASK 10:


Like when editing an object, you can make it Phantom, Physical... You can also do this with scripting, the function you have to use to do this is llSetStatus, its layout is llSetStatus(integer status, integer value);, so if i wanted to make my object go physical the integer status would be STATUS_PHYSICS or 1, if i wanted to make my object go phantom i would use STATUS_PHANTOM or 16. Your script should look something like this:

<lsl> default {

   state_entry()
   {
       llSetStatus(STATUS_PHYSICS, TRUE);
   }

} </lsl>


You now know pretty much the basics of scripting, but there are still many more functions to use and experiment with yet!!!!!! To know more functions and what they do, take a look at these links below:

http://wiki.secondlife.com/wiki/LSL_Portal

http://www.lslwiki.net/lslwiki/wakka.php?wakka=HomePage

http://rpgstats.com/wiki/index.php?title=Main_Page