Avatar Appearance

Packets

• AgentWearablesRequest
  • This is where it starts. The viewer asks the simulator what it is wearing, and an AgentWearablesUpdate packet is returned.
• AgentWearablesUpdate
  • A mapping of wearable types to asset IDs and item IDs is returned to the client. There are currently 13 different wearable types and all 13 will always be returned in this packet. If your avatar is not wearing a wearable type the asset ID and item ID for that type will be null IDs (all zeros). The next step is to request an asset transfer for all of the non-null asset IDs and download the wearable assets.
• AgentIsNowWearing
  • Like the AgentWearablesUpdate packet but in the other direction. The viewer sends a list of the 13 wearable types and their associated item IDs, or null if nothing is being worn in that wearable slot. This is typically sent right before AgentSetAppearance.
• AgentSetAppearance
  • Serves two purposes, to tell the server how our avatar mesh is deformed (with visual parameters) and what textures we are wearing. There are currently 218 VisualParam blocks sent with each AgentSetAppearance describing everything from the color of the avatar eyes to the gender slider. A TextureEntry is also sent that uses the same TextureEntry format objects use, but each "face" is hard-coded to describe a particular texture. This may or may not include baked textures for the five different baked layers (head, upper, lower, eyes, and skirt).
  • The ParamValue fields do not have parameter IDs associated with them in the packet, as it's assumed all viewers have the same parameter map in the same sequence. The parameters are stored internally as a floating point integer, and are converted to a single byte by inputting the value along with minimum and maximum weights for that parameter to a conversion function.

• AvatarAppearance
• AgentCachedTexture
• AgentCachedTextureResponse
• AvatarTextureUpdate

Linden avatar definition file

The parameters affecting avatar appearance are defined in an XML file located in the executable at

SecondLife\character\avatar_lad.xml

and in the source code at

linden\indra\newview\character\avatar_lad.xml

With a few exceptions

genepool.xml

rouge_alpha.tga

underpants_trial_female.tga

underpants_trial_male.tga

undershirt_trial_female.tga

upperbodyfreckles_alpha.tga

all of the other files in the same directory are referenced by avatar_lad.xml. These include the mesh files (.llm), the texture files (.tga) and the avatar_skeleton.xml file (see below).

genepool.xml contains parameter sets for wearable types WT_SHAPE, WT_SKIN, WT_HAIR, and WT_EYES for several archetypal avatar definitions. You can see the current parameter set for your own avatar by invoking the debug menus (Ctrl-Alt-D) and selecting Client->Character->Character Tests->Appearance To XML. This will create a file

SecondLife\character\new archetype.xml

in the same format as genepool.xml.

The avatar definition file affects the appearances on your viewer only. Any change to the file will not affect how others see the avatars. You can set value_default="1" for "Express_Tongue_Out" to make the avatars on your viewer give you the raspberries, but no one else will notice.

The interesting thing is that this file defines parameters that can be used in animations.

File structure

<?xml version="1.0" encoding="US-ASCII" standalone="yes"?>

<linden_avatar version="1.0" wearable_definition_version="22">

<skeleton file_name="avatar_skeleton.xml">

<attachment_point id="1" group="6" name="Chest" joint="mChest"

position="0.15 0 -0.1" rotation="0 90 90" visible_in_first_person="true"

pie_slice="2" hud="true" max_attachment_offset="1.5" />

<param ... >

<param_skeleton>

<bone name="mNeck" scale="0 0 .2" offset="0 0 .004" />

</param_skeleton>

</param>

</skeleton>

Sets of

<mesh type="hairMesh" lod="0" file_name="avatar_hair.llm"

min_pixel_width="320" min_pixel_area="0.1" >

<param ... >

<param_morph />

or

<param_morph>

<volume_morph name="HEAD" scale="-0.008 -0.006 0.015"

pos="0.07 0 -0.07" />

</param_morph>

</param>

</mesh>

<mesh type="hairMesh" lod="1" file_name="avatar_hair_1.llm"

min_pixel_width="160" min_pixel_area="0.1" reference="avatar_hair.llm">

</mesh>

<global_color name="skin_color">

<param ... >

<param_color operation="blend" >

<value color="252, 215, 200, 255" />

</param_color>

</param>

</global_color>

<layer_set body_region="head" width="512" height="512"

clear_alpha="false" alpha_tga_file="head_alpha.tga" >

<layer name="head bump definition" render_pass="bump"

global_color="hair_color" fixed_color="128,128,128,255"

write_all_channels="true" >

<texture local_texture="lower_jacket" local_texture_alpha_only="true" />

and if not fixed_color

<texture tga_file="bump_head_base.tga" file_is_mask="FALSE" />

<morph_mask morph_name="Displace_Loose_Upperbody" invert="FALSE" />

<param ... >

<param_alpha tga_file="bump_face_wrinkles.tga" skip_if_zero="true"

multiply_blend="false" domain="0" />

or

<param_color operation="multiply" >

<value color="0, 0, 0, 0" />

</param_color>

</param>

</layer>

</layer_set>

<driver_parameters>

<param ... >

<param_driver>

<driven id="628" min1="0.1" max1="0.5" max2="1" min2="1" />

</param_driver>

</param>

</driver_parameters>

</linden_avatar>

where bold text indicates required tags or parameters, standard text indicates a tag that can occur zero or one time, italics indicates that the tag can be repeated zero or more times, and bold italics indicates that at least one is required but more are possible.

Note that the values shown for parameters here may not be consistent. They are shown only to indicate the value type.

Parameter detail

<param ... > is

<param id="32" group="1" name="Male_Skeleton"

value_min="0" value_max="1" value_default="0"

edit_group="shape_body" edit_group_order="1"

label="Skeleton" label_min="Female" label_max="Male"

wearable="shape" clothing_morph="true" sex="male" shared="1"

show_simple="true" simple_percent_min="40" simple_percent_max="100"

camera_distance="2.2" camera_elevation=".1" camera_angle="0" >

Parameters are parsed in LLViewerVisualParamInfo::parseXml and LLVisualParamInfo::parseXml and are used by LLViewerVisualParam and LLVisualParam respectively when LLVOAvatar::loadAvatar is called.

Fields parsed in LLVisualParamInfo are used to describe the appearance of the avatar.

id -- mID

name -- mName

default ""

group -- mGroup

"0" is VISUAL_PARAM_GROUP_TWEAKABLE

"1" is VISUAL_PARAM_GROUP_ANIMATABLE

default "0"

value_min -- mMinWeight

default 0.

value_max -- mMaxWeight

default 1.

value_default -- mDefaultWeight

default 0.

sex -- mSex

		"both"	SEX_BOTH
		"male"	SEX_MALE
		"female"	SEX_FEMALE
		default	SEX_BOTH

label -- mDisplayName

default is name

label_min -- mMinName

default is "Less"

label_max -- mMaxName

default is "More"

shared

Used only by mesh params. Indicates that the param affects more than one mesh

Fields parsed in LLViewerVisualParamInfo describe the appearance of the entries on the Edit->Appearance editing panel.

wearable -- mWearableType

		"shape"	WT_SHAPE
		"skin"	WT_SKIN
		"hair"	WT_HAIR
		"eyes"	WT_EYES
		"shirt"	WT_SHIRT
		"pants"	WT_PANTS
		"shoes"	WT_SHOES
		"socks"	WT_SOCKS
		"jacket"	WT_JACKET
		"gloves"	WT_GLOVES
		"undershirt"	WT_UNDERSHIRT
		"underpants"	WT_UNDERPANTS
		"skirt"	WT_SKIRT
		default	WT_INVALID

edit_group -- mEditGroup

default ""

edit_group_order -- mEditGroupDisplayOrder

By default, value 0, parameters are displayed in the order in which they appear in the xml file. "edit_group_order" overriddes this.

Optional camera offsets from the current joint center. Used for generating "hints" (thumbnails).

camera_distance -- mCamDist

default 0.5

camera_angle -- mCamAngle

default 0.

camera_elevation -- mCamElevation

default 0.

show_simple -- mShowSimple

value is ignored

default FALSE

simple_percent_min -- mSimpleMin

value is ignored

default 0.

simple_percent_max -- mSimpleMax

value is ignored

default 100.

Loading the file

The file is parsed in LLVOAvatar::initClass() primarily by calls to LLVOAvatarInfo. Both classes are defined in indra\newview\llvoavatar.h(.cpp). There is one method for each of the major XML nodes

LLVOAvatarInfo::parseXmlSkeletonNode

LLVOAvatarInfo::parseXmlMeshNodes

LLVOAvatarInfo::parseXmlColorNodes

LLVOAvatarInfo::parseXmlLayerNodes

LLVOAvatarInfo::parseXmlDriverNodes

This data is then used to create instances of LLVOAvatar in LLVOAvatar::loadAvatar() which invokes LLVOAvatar::loadSkeletonNode() and LLVOAvatar::loadMeshNodes().

Linden skeleton definition file

The skeletal structure is defined in an XML file located in the executable at

SecondLife\character\avatar_skeleton.xml

and in the source code at

linden\indra\newview\character\avatar_skeleton.xml

It is referenced through the avatar definition file (see above) and can be considered to be part of the avatar definition.

File structure

<?xml version="1.0" encoding="US-ASCII" standalone="yes"?>

<linden_skeleton version="1.0" num_bones="46" num_collision_volumes="19">

<bone name="mPelvis" pos="0.000 0.000 1.067" rot="0.000000 0.000000 0.000000"

scale="1.000 1.000 1.000" pivot="0.000000 0.000000 1.067015">

<collision_volume name="PELVIS" pos = "-0.01 0 -0.02"

rot="0.000000 8.00000 0.000000" scale="0.12 0.16 0.17"/>

<bone ...>

</bone>

</bone>

</linden_skeleton>

where bold text indicates required tags or parameters, standard text indicates a tag that can occur zero or one time, and italics indicates that the tag can be repeated zero or more times.

The <bone ...> tag above is to indicate that the structure is recursive.

The "46" for num_bones is actually a typo in the file. There are only 26 bones defined.

Loading the file

The file is parsed in LLVOAvatar::initClass() using LLVOAvatarSkeletonInfo::parseXml. Both classes are defined in indra\newview\llvoavatar.h(.cpp).

This data is then used to create instances of LLVOAvatar in LLVOAvatar::loadAvatar() which invokes LLVOAvatar::buildSkeleton(). A special-purpose "screen" joint named "mScreen" is also created.

Linden binary mesh file

Meshes are defined in binary files located in the executable at

SecondLife\character\*.llm

and in the source code at

linden\indra\newview\character\*.llm

They are referenced through the avatar definition file (see above) and can be considered to be part of the avatar definition.

There are two types of mesh files: the base mesh definition and the level of detail (LOD) mesh definition which always references a base mesh definition file. LOD meshes are used to simplify the rendering when the avatar is distant from the camera. There are several LOD meshes with progressively decreasing resolution.

File structure

Base mesh

char[24] "Linden Binary Mesh 1.0"

U8 hasWeights

U8 hasDetailTexCoords

LLVector3 position

LLVector3 rotationAngles

U8 rotationOrder (ignored, set to 0)

LLVector3 scale

U16 numVertices

LLVector3[ numVertices ] baseCoords

LLVector3[ numVertices ] baseNormals

LLVector3[ numVertices ] baseBinormals

LLVector2[ numVertices ] texCoords

if (hasDetailTexCoords)

LLVector2[ numVertices ] detailTexCoords

if (hasWeights)

F32[ numVertices ] weights

U16 numFaces

struct faces[ numFaces ]

{

S16[3] face

}

if ( hasWeights )

{

U16 numSkinJoints

struct skinJoints[ numSkinJoints ]

{

char[64] jointName

}

}

struct morph []

{

char[64] morphName

S32 numVertices

struct vertices[ numVertices ]

{

U32 vertexIndex

LLVector3 coord

LLVector3 normal

LLVector3 binormal

LLVector2 texCoord

}

}

char[64] "End Morphs"

S32 numRemaps (or EOF)

struct vertexRemap[ numRemaps ]

{

S32 remapSource

S32 remapDestination

}

Level Of Detail (LOD) mesh

char[24] "Linden Binary Mesh 1.0"

U8 hasWeights

U8 hasDetailTexCoords

LLVector3 position

LLVector3 rotationAngles

U8 rotationOrder (ignored, set to 0)

LLVector3 scale

U16 numFaces

struct faces[ numFaces ]

{

S16[3] face

}

where LLVector2 and LLVector3 are 2 and 3 floats respectively, and all numbers are little endian. Integers are 8, 16, or 32 bits signed (S) or unsigned (U).

Loading the file

This data is used to create instances of LLVOAvatar in LLVOAvatar::loadAvatar() through LLVOAvatar::loadMeshNodes, LLPolyMesh::getMesh, LLPolyMeshSharedData::loadMesh, and LLPolyMorphData::loadBinary. These are found in indra\newview\llvoavatar.h(.cpp), indra\newview\llpolymesh.h(.cpp), and indra\newview\llpolymorph.h(.cpp).