Difference between revisions of "Tips for building efficiently with prims"

From Second Life Wiki
Jump to: navigation, search
Line 1: Line 1:
 
{{KBmaster}}
 
{{KBmaster}}
''Share your tips on this page!''
 
  
 
=== Better Building with Primfficiency! ===
 
=== Better Building with Primfficiency! ===
Line 14: Line 13:
 
Here are some examples of primfficiency, complete with screenshots:
 
Here are some examples of primfficiency, complete with screenshots:
  
=== Save Some Stairs ===
+
=== Save some stairs ===
  
[[File:So-tipstricks1.jpg|right]] Two stair steps can be made with a single prim.
+
Two stair steps can be made with a single prim.
  
 
# Rez (create) a box.
 
# Rez (create) a box.
 
# Rotate and stretch it out a little.
 
# Rotate and stretch it out a little.
 
# Set '''Path Cut Begin''' = 0.125 and '''Path Cut End''' = 0.875.
 
# Set '''Path Cut Begin''' = 0.125 and '''Path Cut End''' = 0.875.
 +
 +
[[File:So-tipstricks1.jpg]]
  
 
While this may look unexceptional at first glance, stairs can be long, so the savings quickly add up.
 
While this may look unexceptional at first glance, stairs can be long, so the savings quickly add up.
  
=== Sit Pretty (But Not Primmy) ===
+
=== Sit pretty (but not primmy) ===
  
[[File:So-tipstricks2.jpg|right]] The "one-prim bar stool" is a longtime commodity in the Second Life virtual world, and if you've never figured out how to do it before, here's the recipe. And it's FREE!
+
The "one-prim bar stool" is a longtime commodity in the Second Life virtual world, and if you've never figured out how to do it before, here's the recipe. And it's FREE!
  
 
# Start out by rezzing a tube.
 
# Start out by rezzing a tube.
Line 33: Line 34:
 
# Then carve out your new seat by making '''Hollow''' = "85".
 
# Then carve out your new seat by making '''Hollow''' = "85".
  
You can also set a click-action on your stool so you can sit with a single left-click. How?
+
[[File:So-tipstricks2.jpg]]
 +
 
 +
You can also set a [[click action]] on your stool so you can sit with a single left-click. How?
  
 
# Select the '''General''' tab in the edit tools (or right-click on the stool and select '''Edit''' from the pie menu).
 
# Select the '''General''' tab in the edit tools (or right-click on the stool and select '''Edit''' from the pie menu).
Line 43: Line 46:
 
{{KBvideo|4168718}}
 
{{KBvideo|4168718}}
  
=== Reinvent the Wheel ===
+
=== Reinvent the wheel ===
  
[[File:So-tipstricks3.jpg|right]] The most common way to make a vehicle wheel is to flatten a cylinder. The end result tends to look rather flat, especially if you're adding texture. A more dynamic way to do this is:
+
The most common way to make a vehicle wheel is to flatten a cylinder. The end result tends to look rather flat, especially if you're adding texture. A more dynamic way to do this is:
  
 
# Rez a ring and set both '''Twist Begin''' '''and''' '''End''' = "90" and '''Hole Size X''' = "0.75".
 
# Rez a ring and set both '''Twist Begin''' '''and''' '''End''' = "90" and '''Hole Size X''' = "0.75".
 
# Still look too flat? Lower '''Profile Cut End''' to taste, say, "70" and make '''Hollow''' = "25" and you're cooking!
 
# Still look too flat? Lower '''Profile Cut End''' to taste, say, "70" and make '''Hollow''' = "25" and you're cooking!
 +
 +
[[File:So-tipstricks3.jpg]]
  
 
The picture shows each face (area) of the prim as a different color. And it need not just be tires: you can make dishes, containers — whatever you want your newly wrangled, multi-faceted ring to be!
 
The picture shows each face (area) of the prim as a different color. And it need not just be tires: you can make dishes, containers — whatever you want your newly wrangled, multi-faceted ring to be!

Revision as of 12:10, 15 October 2009

Better Building with Primfficiency!

KBtrivia.png Trivia: This was adapted from an old Second Life newsletter but is still mostly relevant today.

As you may already know, "prims" are the basic building blocks used to create all objects in the Second Life virtual world. Combining prims and shaping them allows you to come up with some complex contraptions and interesting visual wonders. "Primfficiency" is the art and science of mastering prim shaping to achieve great results. Think of "prim efficiency + proficiency". There are a number of benefits to learning the ways of the prim:

  • You can achieve some pretty tricked-out shapes using a single prim
  • Your building skills will increase naturally while exploring the possibilities; and
  • By conserving objects, you'll have more to use on a given parcel of land.This is very important if you find yourself running out of prims.

Here are some examples of primfficiency, complete with screenshots:

Save some stairs

Two stair steps can be made with a single prim.

  1. Rez (create) a box.
  2. Rotate and stretch it out a little.
  3. Set Path Cut Begin = 0.125 and Path Cut End = 0.875.

So-tipstricks1.jpg

While this may look unexceptional at first glance, stairs can be long, so the savings quickly add up.

Sit pretty (but not primmy)

The "one-prim bar stool" is a longtime commodity in the Second Life virtual world, and if you've never figured out how to do it before, here's the recipe. And it's FREE!

  1. Start out by rezzing a tube.
  2. Stretch it so it's taller.
  3. Set Hole Size Y = "0.50". Profile Cut Begin and End = "0.25" and "0.95", respectively.
  4. Then carve out your new seat by making Hollow = "85".

So-tipstricks2.jpg

You can also set a click action on your stool so you can sit with a single left-click. How?

  1. Select the General tab in the edit tools (or right-click on the stool and select Edit from the pie menu).
  2. Near the bottom, select the drop down menu under the When Left-Clicked option then select Sit On Object.
  3. Close the edit window and left-click your bar stool! Voila!

Here's a video of this trick:

Reinvent the wheel

The most common way to make a vehicle wheel is to flatten a cylinder. The end result tends to look rather flat, especially if you're adding texture. A more dynamic way to do this is:

  1. Rez a ring and set both Twist Begin and End = "90" and Hole Size X = "0.75".
  2. Still look too flat? Lower Profile Cut End to taste, say, "70" and make Hollow = "25" and you're cooking!

So-tipstricks3.jpg

The picture shows each face (area) of the prim as a different color. And it need not just be tires: you can make dishes, containers — whatever you want your newly wrangled, multi-faceted ring to be!

KBtip2.png Tip: If you don't want the center texture to look distorted, click the Texture tab and select Mapping > Planar. If you get lost, just copy the numbers in the screenshots and explore on your own. Enjoy being primfficient!