Difference between revisions of "Touch start"

From Second Life Wiki
Jump to navigation Jump to search
(More sensible first example. Clarified num_detected values in practice.)
(Remove obsolete warning. Correct and clarify state change advice)
Line 1: Line 1:
{{Issues/SVC-3017}}{{LSL_Event|event_id=2|event_delay|event=touch_start
{{LSL_Event|event_id=2|event_delay|event=touch_start
|p1_type=integer
|p1_type=integer
|p1_name=num_detected
|p1_name=num_detected
Line 7: Line 7:
|spec
|spec
|caveats=* If a prim [[face]] has [[Navigating Shared Media|Shared Media]] enabled and the avatar's viewer supports this feature, LSL scripts will not detect touches on that face. Touches from older clients will be detected.
|caveats=* If a prim [[face]] has [[Navigating Shared Media|Shared Media]] enabled and the avatar's viewer supports this feature, LSL scripts will not detect touches on that face. Touches from older clients will be detected.
|examples=You can use numbers 0 through num_detected - 1 with the various llDetected... functions to get detected agent keys etc. For most purposes, it is adequate to bother only with the first detected toucher e.g. llDetectedKey(0). It is rare (but not impossible) for num_detected to be other than 1.
|examples=You can use numbers 0 through (num_detected-1) with the various llDetected... functions to get detected agent keys etc. For most purposes, it is adequate to bother only with the first detected toucher e.g. llDetectedKey(0). It is rare (but not impossible) for num_detected to be other than 1.
<lsl>
<lsl>
default
default
Line 20: Line 20:
}
}
</lsl>
</lsl>
If there is any state change in touch_start event and you click on a prim and release before the state is changed, succeeding [[touch]] and [[touch_end]] events will be discarded from the event queue before entering the new state. It means no touch_* event will occur in this new state until you touch it again. If you drop this script into any prim and click it, you will only see the message "You just started touching me so I'm going to the other state...". When you click it again, you will only see the message "The touch that brought you here just ended so I'm going back to default...".
{{LSL Tip|LSL has a problem with switching states so if you rely on high performance scripts, don't change states but use an integer to change your "mode" or something the like.}}
<lsl>
// check the effect of this script when clicking & holding
// your mouse button for a few seconds when touching the prim
default
{
    touch_start(integer num_detected)
    {
        // PUBLIC_CHANNEL has the integer value 0
        llSay(PUBLIC_CHANNEL,
            "You just started touching me so I'm going to the other state...");
        state other;
    }
}
state other
{
    touch_end(integer num_detected)
    {
        llSay(PUBLIC_CHANNEL,
            "The touch that brought you here just ended so I'm going back to default...");


        state default;
    }
}
</lsl>
|helpers
|helpers
|also_header
|also_header
Line 65: Line 37:
|also_articles
|also_articles
|also_footer
|also_footer
|notes=*If using a touch to change states be careful about the touch_ event order. On clicking a prim with touch events we trigger touch_start (as), touch (during) and touch_end (as released). The touch_ chain will remain intact until either touch_end is triggered or a new touch_start. If however the script is reset (although there is some doubt as far as this is concerned (see {{Jira|SVC-3017}} for more details) the chain will be cleared. If the script is taken into inventory, deleted or the like, the touch_chain is cleared too. It is not certain whether the behavior is truly a bug or expected.
|notes=*If using a touch to change states be careful about the touch_ event order. '''The best advice is NOT to do state changes from within touch_start.''' Add a touch_end event and do the state change there. Changing state from within touch_start can cause the next occurrence of THIS touch_start code to be missed. 
 
*On clicking a prim with touch events we trigger touch_start (on first contact), touch (during) and touch_end (as released).  
|mode
|mode
|deprecated
|deprecated

Revision as of 03:55, 27 December 2012

Description

Event: touch_start( integer num_detected ){ ; }

Triggered by the start of agent clicking on task

• integer num_detected – Number of agents detected touching during the last clockcycle

Caveats

  • If a prim face has Shared Media enabled and the avatar's viewer supports this feature, LSL scripts will not detect touches on that face. Touches from older clients will be detected.
All Issues ~ Search JIRA for related Bugs

Examples

You can use numbers 0 through (num_detected-1) with the various llDetected... functions to get detected agent keys etc. For most purposes, it is adequate to bother only with the first detected toucher e.g. llDetectedKey(0). It is rare (but not impossible) for num_detected to be other than 1. <lsl> default { 

   touch_start(integer num_detected)
   {
       key    avatarKey  = llDetectedKey(0);
       string avatarName = llDetectedName(0);

       llInstantMessage(avatarKey, "Hello " + avatarName );
   }

} </lsl>

Notes

  • If using a touch to change states be careful about the touch_ event order. The best advice is NOT to do state changes from within touch_start. Add a touch_end event and do the state change there. Changing state from within touch_start can cause the next occurrence of THIS touch_start code to be missed.
  • On clicking a prim with touch events we trigger touch_start (on first contact), touch (during) and touch_end (as released).

Deep Notes

Signature

event void touch_start( integer num_detected );
Retrieved from "https://wiki.secondlife.com/w/index.php?title=Touch_start&oldid=1175645"