Viewer 2 Microsoft Windows Builds

From Second Life Wiki
Jump to navigation Jump to search

Philosophy: to keep it brief, this page should only include steps we KNOW ARE NEEDED, not random hints. Extra details or open issues can go on the talk page.

KBnote.png Note: Following this recipe will probably take 6 to 12 hours of wall-clock time, and 2 to 6 hours of your time, if you're starting from a fresh Windows XP/Vista/7 system.
KBcaution.png Important: If you want alter the build instructions please try to have a discussion with at least one person on #opensl on Freenode. There are language and stylistic conventions we try to follow and we want to make sure any change to these instructions is tested in a number of build environments before being published here.

Establish your programming environment

This is needed for compiling any viewer based on the LL open source code and only needs to be done once.

Install and update Visual Studio and SDKs

Install required development tools

KBnote.png Note: The order of the following installations should not matter.
KBnote.png Note: If the installer for a particular package does not update your PATH environment variable you will have to do this manually.
  • CMake (download CMake)
    • This should be version 2.8.4 (or above in the 2.8.x series).
    • Add the \bin directory to your path.
  • Python (either Standard Python or ActivePython)
    • Version 2.7.1 works with the build scripts.
  • Mercurial (either TortoiseHg or Mercurial Hg)
    • Create a new file %USERPROFILE%\Mercurial.ini and in it put your Second Life name and optionally your email address:
[ui]
username = John Doe <john@example.com>
  • Cygwin (download Cygwin)
    • When you run the cygwin setup utility make sure you have selected to install unzip (under "Archives"), bison, flex, patchutils (all located under "devel"), and curl (under "Web"), which are not part of the default install. Do not install Cygwin Python or Mercurial. You won't need to use the Cygwin shell for anything.
    • Add the cygwin\bin directory to the very end of your path and make sure it stays that way.

Install optional development tools

  • Unicode NSIS (Nullsoft Scriptable Install System)
    • This is the package installer used to build Second_Life_<version-code>_LindenDeveloper_Setup.exe. You only need this package if you are going to distribute the viewer you compile or if you want to install it locally.
    In the Configure VS2010 step below you will need to add a line in the Executable Directories section:
    • 64 bit systems use %ProgramFiles(x86)%\NSIS\Unicode
    • 32 bit systems use %ProgramFiles%\NSIS\Unicode
  • Notepad++
  • Mercurial_Tools (strongly recommended)
    • When you are following these instructions you will be updating the %USERPROFILE%\Mercurial.ini file you created when you installed Mercurial.

Install Autobuild

  • Add an environment variable, so that autobuild doesn't default to using (or trying) older compiler versions:
    • Right-click "My Computer" and select Properties or press the windows logo key and the pause key at the same time.
    • For XP, when the Properties dialog opens, click the Advanced tab followed by the Environmental Variables button. This will open a new window with a list of System and User variables. For Vista and later, when the System Properties window opens, click the Advanced system settings on the left column, then click Environment Variables...
    • In the User section, click New. Set Variable Name to AUTOBUILD_VSVER and set Variable Value to 100.
    • Click the OK/Close buttons to close all the windows.

Configure VC2010

While you may choose to use autobuild for all your compiling you still need to establish certain settings internal to VC2010.

  • Start the IDE.
  • Navigate to Tools > Options > Projects and Solutions > Build and Run and set maximum number of parallel projects builds to 1.
  • (VC Express only) Enable Tools > Settings > Expert Settings to get the Build (and other) menus. If you already have a Build menu you do not need to perform this step.
KBnote.png Note: The following steps require an open visual studio project. It does not matter which project you use, as you will only change some global settings used by all projects when they are opened. The open project itself won't be changed.

You will need to set a number of paths.

  • Open any existing project you may have or make a New Project.
  • Navigate to View ( > Other Windows ) > Property Manager. You will see Property Manager as a pane on the left side.

At the bottom on the Solution Explorer you will see three tabs.

  • Click the one on the right labeled Property Manager. (The name may be somewhat truncated.)

VS2010 Property Manager.PNG Example image

  • On the left side click to expand any project and then click again to expand the Release folder.

VS2010 Project Config.PNG Example image

  • Right click on Microsoft.Cpp.Win32.user.
  • Pick General

Set Enable Managed Incremental Build to Yes.

  • Pick VC++ Directories.

This is where the build environment is pulled together into a functional VC2010 build system and also where much hand wringing, hair pulling, and fist pounding frustration takes place.

  • Set Executable Directories to:
$(ExecutablePath)
$(DXSDK_DIR)
$(WindowsSdkDir)\Bin
C:\cygwin\bin
$(SystemRoot)

32BitExecutableDirectories.png 32 bit Executable Directories example image

  • Set Include Directories to:
$(WindowsSdkDir)\Include
$(WindowsSdkDir)\Include\gl
$(DXSDK_DIR)\Include

32BitIncludeDirectories.png 32 bit Include Directories example image

  • Set Library Directories to:
$(WindowsSdkDir)\Lib
$(DXSDK_DIR)

32BitLibraryDirectories.png 32 bit Library Directories example image

Set up your source code tree

Plan your directory structure ahead of time. If you are going to be producing changes or patches you will be cloning a copy of an unaltered source code tree for every change or patch you make, so you might want to have all this work stored in it's own directory.

To get a copy of the source code tree:

  • Open up a DOS Command window
  • CD to where you want to install viewer-release. Do not have any spaces in this path.
  • Do:
hg clone http://hg.secondlife.com/viewer-release

Let's say some time has gone by since you have performed the previous steps and now you want to develop a change or work on a jira. You will update your clean local repository with all the changes committed to viewer-release since you last synchronized your files:

  • CD into viewer-release
  • Do:
hg pull -u
  • Move up one level from viewer-release
  • Do:
hg clone viewer-release VWR-nnnnn

Note: nnnnn is the jira number. You can also clone to a name of your choosing if you are making changes not associated with the LL jira system.

Prepare third party libraries

Most third party libraries needed to build the viewer will be automatically downloaded for you and installed into the build directory within your source tree during the configuration step below. Some few need to be manually set up, though, when using an open source developer configuration (ReleaseOS, RelWithDebInfoOS or DebugOS)

Fmod

KBcaution.png Important: If you are just starting out building the viewer or if you do not care for sound skip these FMOD steps. You will save some time and it is less confusing to make a non-FMOD build.

CD to where you want to install the 3p-fmod repository and do:

hg clone https://bitbucket.org/lindenlab/3p-fmod

CD into the 3p-fmod directory you created and build it:

autobuild build --all

If the above command fails, you might have the version of bash packaged with Git in your PATH. Please edit your path and ensure that the Git path (e.g 'C:\Program Files (x86)\Git\cmd'), if it exists, appears AFTER 'c:\cygwin\bin'.

Package the results:

autobuild package 

Update autobuild with the filename and hash just displayed. CD to the directory where you cloned viewer-release and do:

copy autobuild.xml my_autobuild.xml
set AUTOBUILD_CONFIG_FILE=my_autobuild.xml
autobuild installables edit fmod platform=windows hash=<hash> url=file:///<fmod-filespec>

Example:

copy autobuild.xml my_autobuild.xml
autobuild installables edit fmod platform=windows hash=0f196f00e7dff49f22252efb68525658 url=file:///C:/3p-fmod/fmod-3.75-windows-20110531.tar.bz2
KBnote.png Note: Having to copy autobuild.xml and modify the copy from within a cloned repository is a lot of work for every repository you make, but this is the only way to guarantee you pick up upstream changes to autobuild.xml and do not send up a modified autobuild.xml when you do an hg push.

Configuring the Viewer Build

Fmod is the audio library the viewer uses. If you are compiling with Fmod you will need to do:

set AUTOBUILD_CONFIG_FILE=my_autobuild.xml

The environment variable AUTOBUILD_INSTALLABLE_CACHE controls the placement of library files downloaded as part of the configure process. If you do not want the library files downloaded as part of the configure process going into your Windows %TEMP% directory define the environment variable to point to some other location you have established:

set AUTOBUILD_INSTALLABLE_CACHE=E:\SSfiles\Libraries

At the command line in the source tree's root directory, presumably in your cloned repository (e.g. C:\linden\VWR-12345\)

If you did not configure for FMOD:

autobuild configure -c [CONFIGURATION]

If you did configure for FMOD:

autobuild configure --config-file my_autobuild.xml -c [CONFIGURATION] -- -DFMOD:BOOL=TRUE

where [CONFIGURATION] is one of those listed at Building the Viewer with Autobuild#Build a desired configuration (ReleaseOS, RelWithDebInfoOS, DebugOS)


Configuration Switches

There are a number of switches you can use to modify the configuration process. The name of each switch is followed by its type and then by the value you want to set.

  • FMOD (bool) controls if the Fmod package is incorporated into the viewer. You must have performed the Fmod installation steps in Viewer_2_Microsoft_Windows_Builds#Fmod for this to work.
  • LL_TESTS (bool) controls if the tests are compiled and run. There are quite a lot of them so excluding them is recommended unless you have some reason to need one or more of them.
  • PACKAGE (bool) controls if the package step is run. You must have installed NSIS described in Viewer_2_Microsoft_Windows_Builds#Install_optional_development_tools for this to work.
KBnote.png Note: OFF and NO are the same as FALSE; anything else is considered to be TRUE.

Example without FMOD:

autobuild configure -c ReleaseOS -- -DLL_TESTS:BOOL=FALSE -DPACKAGE:BOOL=FALSE

Example with FMOD:

autobuild configure --config-file my_autobuild.xml -c ReleaseOS -- -DLL_TESTS:BOOL=FALSE -DPACKAGE:BOOL=FALSE -DFMOD:BOOL=TRUE

Compiling the Viewer

KBnote.png Note: Do not be alarmed if you see groups of messages with warning LNK4099: PDB in them.

Compiling the viewer with autobuild

You can compile the viewer with either autobuild (the encouraged/supported method) or with the VS IDE.

When compiling with autobuild you will have the best chance of success if you work from within a preconfigured Command Prompt window. Depending on how your computer has been set up there are two possible ways to open this window and you need to find which works in your particular case:

  • Method 1
    • From All Programs Navigate into the Microsoft Visual Studio 2010 program menu
    • Click on Microsoft Visual Studio Command Prompt (2010)
  • Method 2
    • From All Programs Navigate into the Microsoft Windows SDK V7.1 program menu
    • Click on Windows SDK 7.1 Command Prompt
KBcaution.png Important: If you are building with Fmod and have followed the previous Fmod setup instructions AND you are now using a new command window you will need to redo the set AUTOBUILD_CONFIG_FILE=my_autobuild.xml.
  • Run:

Without FMOD:

autobuild build -c [CONFIGURATION] --no-configure

With FMOD:

autobuild build --config-file my_autobuild.xml -c [CONFIGURATION] --no-configure

There are some useful switches to know about, so your commands may look like this:

Example without FMOD:

autobuild configure -c ReleaseOS -- -DLL_TESTS:BOOL=FALSE -DPACKAGE:BOOL=FALSE
autobuild build -c ReleaseOS --no-configure

Example with FMOD:

autobuild configure --config-file my_autobuild.xml -c ReleaseOS -- -DLL_TESTS:BOOL=FALSE -DPACKAGE:BOOL=FALSE -DFMOD:BOOL=TRUE
autobuild build --config-file my_autobuild.xml -c ReleaseOS --no-configure
KBnote.png Note: It is possible to use autobuild to do both the configure step (only needed once) and the build step with one command. I find it is clearer and saves a bit of time if these steps are done separately.

Compiling the viewer with the IDE

The autobuild configure step created the \build-vc100 directory at the root of the source tree. In here is the SecondLife.sln solution file.

Start the IDE and open this solution.

You might want to change the build type in the drop-down located in the toolbar from Debug to Release or RelWithDebInfo.

VS2010BuildType.png Changing build type example image

You need to adjust the Platform Toolset setting.

  • Select all the projects in the Solution Explorer list on the left of the screen.
    • Click on the first project and scroll to the bottom of this list and Shift ⇧-click on the last project.
  • Right click on the selected list
  • Navigate to Properties > Configuration Properties > General > Platform Toolset
  • Change this value to Windows7.1SDK
  • Push F7 to start the compiler.

Running your newly built viewer

Running from a desktop shortcut

  • Make a desktop shortcut for Drive:\your-path\build-vc100\newview\Release\secondlife-bin.exe
  • Right-click the shortcut
  • Select Properties
  • Set Start in: to Drive:\your-path\indra\newview

Running from within the IDE

  • In the Solution Explorer pane right click on secondlife-bin
    • Click Set as StartUp Project
    • Pick Properties > Configuration Properties > Debugging
      • Set Command to Drive:\your-path\build-vc100\newview\Release\secondlife-bin.exe (adjust Release to the type of build you are doing, e.g. RelWithDebInfo)
      • Set Working Directory to ..\..\indra\newview

Handling Problems

If you encounter errors or run into problems following the instructions above, please first check whether someone else already had the same issue. A solution might be known already. See the issue list below, check the talk page (and report useful experiences there) and search our issue tracker. Even when no description of your problem has been written down yet, someone might know about it, so get in touch with the community to get help.

Getting help

Common Issues/Bugs/Glitches And Solutions

Not being able to find objidl.h in the Microsoft Windows SDK, when compiling llwindow

https://lists.secondlife.com/pipermail/opensource-dev/2011-April/006562.html

  • Can be caused by path problems or some installation conflicts with the DirectX SDK.

stdint.h typedef conflicts between Quicktime and VS2010

https://lists.secondlife.com/pipermail/opensource-dev/2011-April/006565.html

  • Can be solved by some small edits to header files to make sure the two don't bash on each other.

Eliminate deprecated switches, messages, and use memory more efficiently

The VS2010 compiler uses a lot of memory while compiling the viewer. If you run out of memory you will start to page heavily and your compile time will become much longer. The /Zm1000 switch affects compiler memory usage.

You may see this message while compiling:

use 'EHsc' instead of 'GX'

Here is how to free up some memory the compiler allocates and to eliminate these messages:

  • Edit \CMake 2.8\share\cmake-2.8\Modules\Platform\Windows-cl.cmake
  • Replace line 156 with:
 IF(MSVC10)
   SET(CMAKE_CXX_FLAGS_INIT "/DWIN32 /D_WINDOWS /W3 /EHsc /GR")
 ELSEIF(NOT MSVC10)
   SET(CMAKE_CXX_FLAGS_INIT "/DWIN32 /D_WINDOWS /W3 /Zm1000 /EHsc /GR")
 ENDIF(MSVC10)
  • Replace line 172 with:
 IF(MSVC10)
   SET(CMAKE_CXX_FLAGS_INIT "/DWIN32 /D_WINDOWS /W3 /EHsc /GR")
 ELSEIF(NOT MSVC10)
   SET(CMAKE_CXX_FLAGS_INIT "/DWIN32 /D_WINDOWS /W3 /Zm1000 /GX /GR")
 ENDIF(MSVC10)
  • Replace line 184 with:
 IF(MSVC10)
   SET(CMAKE_CXX_FLAGS_INIT "/DWIN32 /D_WINDOWS /W3 /EHsc /GR")
 ELSEIF(NOT MSVC10)
   SET(CMAKE_CXX_FLAGS_INIT "/DWIN32 /D_WINDOWS /W3 /Zm1000 /GX /GR")
 ENDIF(MSVC10)

References

Tip of the hat to Nicky_Perian for User:Nicky_Perian/Visual_Studio_10_Autobuild