User:Q Linden/Office Hours/2007-10-15

Time	Speaker	Remarks
[7:35]	Annelin Corrigible	Hello
[7:35]	Q Linden	hey
[7:36]	Annelin Corrigible	How are you ?
[7:36]	Q Linden	fine. Nice avi.
[7:36]	Annelin Corrigible	thanks
[7:36]	Q Linden	I couldn't even find you for a sec!
[7:36]	Annelin Corrigible	I (ve many avies
[7:36]	Annelin Corrigible	I've*
[7:36]	Q Linden	Anything in particular on your mind today?
[7:37]	Annelin Corrigible	no :)
[7:37]	Annelin Corrigible	but that's the way I like to play
[7:37]	Q Linden	I'm about to change the board...my intention is to post this conversation unless someone specificallly requests otherwise
[7:37]	Annelin Corrigible	ok
[7:38]	Annelin Corrigible	So what is your job in LL ?
[7:38]	Q Linden	I'm a developer
[7:39]	Q Linden	I'm just moving over to a new group focusing on the client side of SL
[7:39]	Annelin Corrigible	Studio Shiny ?
[7:39]	Q Linden	In particular, rearchitecting it so that it's more easily extended/reused.
[7:39]	Q Linden	yes, shiny
[7:39]	Q Linden	I'm hoping to make it a better platform for open source development
[7:40]	Annelin Corrigible	I'm surprise because open-source does'nt have is own studio
[7:40]	Annelin Corrigible	(and sorry for the mistakes, I'm french)
[7:40]	Q Linden	Yeah...there are a few of us spread around the org who are trying to promote open source
[7:41]	Q Linden	ah, bon! I lived in france for a year...but we should probably talk in English because my French really isn't that good.
[7:41]	Annelin Corrigible	:)
[7:41]	Annelin Corrigible	where in france ?
[7:42]	Q Linden	Vence (northwest of Nice)
[7:42]	Annelin Corrigible	nice
[7:42]	Q Linden	yes, it was really wonderful
[7:42]	Annelin Corrigible	I also live in the south of france
[7:42]	Q Linden	where?
[7:42]	Annelin Corrigible	Lyon
[7:42]	Q Linden	I've been there once.
[7:42]	Annelin Corrigible	betwwen Nice and Paris
[7:42]	Annelin Corrigible	between*
[7:42]	Q Linden	I went to a carnival there.
[7:42]	Annelin Corrigible	:)
[7:43]	Q Linden	Do you ski?
[7:43]	Annelin Corrigible	sometimes
[7:43]	Annelin Corrigible	the Alpes are not far away
[7:43]	Q Linden	Pretty close to Briancon, right?
[7:43]	Q Linden	doesn't know how to type cedille
[7:43]	Annelin Corrigible	it takes 1h30 in car to go skiing
[7:44]	Annelin Corrigible	Briancon is in the south
[7:44]	Q Linden	Ah, ok.
[7:44]	Q Linden	What sorts of things do you like to do in SL?
[7:45]	Annelin Corrigible	building
[7:45]	Annelin Corrigible	scripting
[7:45]	Annelin Corrigible	have fun with my frien Belzebut
[7:45]	Annelin Corrigible	friend*
[7:45]	Annelin Corrigible	and collect Linden Bears
[7:45]	Annelin Corrigible	accepted your inventory offer.
[7:46]	Annelin Corrigible	Thank you !
[7:46]	Q Linden	:-)
[7:46]	Annelin Corrigible	You(re worjing in SL right now ?
[7:46]	Annelin Corrigible	you're working*
[7:46]	Q Linden	What would you change about our building system?
[7:47]	Q Linden	I am working on viewer architecture changes, yes
[7:47]	Q Linden	first we want to get the viewer in shape to make bigger changes
[7:47]	Annelin Corrigible	building tools are easy to use
[7:47]	Annelin Corrigible	but we need larger prims than 10m
[7:48]	Annelin Corrigible	I know that Havok4 will change that, I hope
[7:48]	Q Linden	Did you see the discussion on the SL blog today?
[7:48]	Q Linden	Or maybe yesterday
[7:48]	Q Linden	About megaprims?
[7:48]	Annelin Corrigible	yes
[7:48]	Q Linden	What would you use bigger prims for?
[7:49]	Annelin Corrigible	we'll save prims with them
[7:50]	Annelin Corrigible	for the buildings
[7:50]	Annelin Corrigible	ot houses
[7:50]	Annelin Corrigible	or*
[7:50]	Q Linden	(By the way, I agree with you -- I'd like to see larger prim limits, but maybe not in all 3 dimensions at once.)
[7:50]	Annelin Corrigible	I don't ask 256x256m
[7:50]	Annelin Corrigible	but 50x50 would be great
[7:51]	Q Linden	would you mind if it was 50x50x1?
[7:51]	Annelin Corrigible	if I can change, yes
[7:51]	Annelin Corrigible	for example, 50x20x1
[7:51]	Q Linden	right...just talking about maximum size
[7:52]	Q Linden	no promises, by the way! I won't be the one making this decision.
[7:52]	Annelin Corrigible	I know
[7:52]	Q Linden	But I'll pass along opinions
[7:53]	Q Linden	Have you used sculpties yet?
[7:53]	Annelin Corrigible	no, I really think that the tools are ok
[7:53]	Annelin Corrigible	sculpties, I did an heart
[7:53]	Annelin Corrigible	but I'mvery bad
[7:53]	Annelin Corrigible	I tried on Maya
[7:54]	Q Linden	oh, with a maya sculptie converter?
[7:54]	Annelin Corrigible	yes, the one Second Life gives
[7:55]	Annelin Corrigible	But I don't have enough skills to do big things
[7:55]	Q Linden	Anyway, sculpties are one of the things I'd like to make easier
[7:56]	Q Linden	I think we could have a sculptie system that lets people manipulate them in-world.
[7:56]	Q Linden	Which could save a lot of prims.
[7:56]	Annelin Corrigible	but it's harder than prims
[7:57]	Q Linden	Yes....but it doesn't have to be as hard as it is now!
[7:57]	Annelin Corrigible	ok
[7:57]	Annelin Corrigible	Torley talked about particles system
[7:58]	Annelin Corrigible	for scripting
[7:58]	Q Linden	I don't understand?
[7:58]	Annelin Corrigible	now, the particle system in lsl is very hard
[7:58]	Q Linden	Ah, I haven't tried to script particles
[7:59]	Annelin Corrigible	One sec, I try to find the jira ticket
[8:03]	Annelin Corrigible	<a href="https://jira.secondlife.com/browse/MISC-632">https://jira.secondlife.com/browse/MISC-632</a>
[8:03]	Annelin Corrigible	here
[8:03]	Annelin Corrigible	add a particles window in the building tools
[8:03]	Q Linden	cool, looking
[8:04]	Annelin Corrigible	I think it could be very usefull
[8:04]	Gigs Taggart	hi q
[8:04]	Gigs Taggart	annelin
[8:04]	Q Linden	Hi, Gigs.
[8:04]	Annelin Corrigible	Hello :)
[8:05]	Q Linden	annelin, I'm wondering why that jira doesn't seem to have been imported into our internal tool. looking
[8:05]	Annelin Corrigible	ok
[8:06]	Annelin Corrigible	By the way, I'm very sad because you don't translate the viewer in french, not entierly)
[8:06]	Gigs Taggart	it's being worked on :)
[8:06]	Annelin Corrigible	Lot of french people are lost in tools
[8:06]	Q Linden	That's another area of interest -- we just had an internationalization meeting last week
[8:07]	Q Linden	Gigs, were you there? I had to leave early.
[8:07]	Gigs Taggart	No, but Steve's UI roadmap includes moving more of the strings to XUI
[8:07]	Gigs Taggart	and a lot of the spots are already marked in the code
[8:07]	Q Linden	Oh yeah. I was getting annoyed about one of them on Friday.
[8:07]	Gigs Taggart	hehe
[8:08]	Gigs Taggart	yeah there's still a good amount of stuff needing to be moved
[8:09]	Annelin Corrigible	Residents can help for the internationalization
[8:09]	Annelin Corrigible	but hey don't know how to help
[8:09]	Annelin Corrigible	they*
[8:09]	Gigs Taggart	that's true on the code side too, if we had more clear XUI guidelines we could easily move strings to XUI
[8:09]	Q Linden	right now, it's hard even for us...but a number of us are now thinking about the problem.
[8:09]	Annelin Corrigible	ok
[8:10]	Q Linden	Gigs, XUI reorganization is what I'm working on right now.
[8:10]	Gigs Taggart	cool
[8:10]	Annelin Corrigible	whay is XUI ?
[8:10]	Q Linden	But it's a goal for the quarter
[8:10]	Gigs Taggart	XUI is a way to take the strings out of the code Annelin, so they can be translated
[8:10]	Annelin Corrigible	ok
[8:10]	Q Linden	XUI is the description of the user interface, which *should* (but doesn't) include all of the text strings
[8:11]	Q Linden	We're part way toward easy translation, but there are still issues.
[8:11]	Gigs Taggart	If I could change the topic, Q do you know much about 3D picking code? :)
[8:11]	Gigs Taggart	I'm arm deep in that project right now hehe
[8:12]	Gigs Taggart	the picking in the viewer is pretty messy and I'm trying to clean it up a lot
[8:12]	Q Linden	I know about 3D picking in general, but haven't looked at it in the viewer yet.
[8:12]	Q Linden	What's going on?
[8:13]	Gigs Taggart	well, the picking right now is sorta a mess.. we've got one place to pick a UV coord off a face, another place to determine the picked offset from the object center, and yet another place to pick just the object
[8:14]	Gigs Taggart	the UV picking uses a gradient rendered on the face, the offset picking uses a traced ray unprojected, and the object picking uses indexed colors
[8:14]	Q Linden	All useful techniques. :-)
[8:14]	Gigs Taggart	heh yeah, I'm just not sure all three are needed :)
[8:14]	Q Linden	But I understand you'd like to be thinking about unifying them.
[8:15]	Q Linden	Still, though, for performance reasons I'm not sure that it's efficient to eliminate any of them!
[8:15]	Gigs Taggart	yeah, well this all started in that I wanted to fix the camera zooming on hollow prims, but it's grown from there
[8:16]	Gigs Taggart	heh, well if all three were clean implementations we'd probably want to keep them, but what I've told you really doesn't express just how messy this part of the client code is :)
[8:16]	Q Linden	/q wishes he had a "rolls eyes" gesture
[8:16]	Gigs Taggart	it's all... 25 page long functions with these algorithms buried in them
[8:16]	Gigs Taggart	not general use methods hehe
[8:17]	Q Linden	sigh. how far along are you?
[8:17]	Gigs Taggart	well, I've been able to eliminate about 1000 lines of code, there was a huge function to calculate camera focus minimum distance, which can be eliminated with better picking
[8:18]	Gigs Taggart	it seems the picking code is ... almost obcessed with shifting the pick point toward the center of the picked object.
[8:18]	Gigs Taggart	I can't figure out why you'd want to shift the point toward the center like that
[8:18]	Gigs Taggart	I don't see any other place in the code that relies on the pick being within the object extents really
[8:19]	Q Linden	That explains some behavior of camera motion I always thought was odd.
[8:19]	Gigs Taggart	yeah
[8:19]	Gigs Taggart	that kinda thing is what I'm trying to work out
[8:19]	Gigs Taggart	also, there's entirely different picking code for avatars vs objects, I'm going to try to unify that some
[8:20]	Q Linden	So as you know, we're not yet very good at accepting patches. Some of us are trying to improve that.
[8:20]	Gigs Taggart	since really, even though the avatar doesn't hit the same as an object, I'm not sure it justifies completely separate code
[8:20]	Q Linden	But the bigger your changes, the harder it is to accept them, especially right now.
[8:20]	Gigs Taggart	hehe
[8:20]	Gigs Taggart	well, this part of the client is so crufty, if my patch works, I suspect it will be an easy sell
[8:21]	Gigs Taggart	it looks like no one has touched this stuff since 2003
[8:21]	Annelin Corrigible	^^
[8:21]	Q Linden	Yes, but my worry is that it collides with something else we're trying to do internally, and then we could lose it.
[8:21]	Gigs Taggart	is someone else messing with the picking?
[8:22]	Q Linden	Esp. since we now have the viewer cleanup project going. I don't think so...although it's been something I was thinking about.
[8:22]	Q Linden	I haven't touched it yet, and wouldn't be likely to for a couple of months.
[8:22]	Q Linden	Is there a JIRA on this?
[8:23]	Gigs Taggart	kinda, this was all started under a Jira to make zooming inside hollow prims not suck.
[8:23]	Q Linden	ok...is that VWR-1286?
[8:24]	Q Linden	<a href="https://jira.secondlife.com/browse/VWR-1286">https://jira.secondlife.com/browse/VWR-1286</a>
[8:24]	Gigs Taggart	yeah
[8:24]	Gigs Taggart	I had things almost working fine at one point, but one little nagging issue has uncovered a lot more breakage in the current code.
[8:25]	Q Linden	This is, I imagine, a bit risky regarding changes to current behavior.
[8:25]	Gigs Taggart	I can avoid refactoring everything.
[8:25]	Q Linden	That will help!
[8:25]	Gigs Taggart	There's really two main functions I'd probably need to touch.
[8:26]	Gigs Taggart	Though I have to say, SL will never really move forward as an open source project if you can't take larger patches. :)
[8:26]	Q Linden	Keep me posted on this, ok? I'll probably want to adopt it, as it's a point of pain for me.
[8:27]	Gigs Taggart	k
[8:27]	Q Linden	Yes, we know. We're thinking about it pretty hard.
[8:27]	Gigs Taggart	There's only one regression I have planned right now, and it's a minor one
[8:27]	Annelin Corrigible	How many lines of code has SL ?
[8:27]	Annelin Corrigible	the viewer
[8:27]	Q Linden	Trying to put systems in place that can let us do that, while not adding too much drag to our internal processes
[8:27]	Gigs Taggart	right now if you "pan into" the selected prim the viewer will push your camera out of it. However it'll happily pan other prims through your near clip
[8:28]	Gigs Taggart	I do plan to have a small change to that, in that you can pan the current selection through near clip.
[8:28]	Gigs Taggart	this shouldn't be confusing since the viewer already lets you pan into other objects, just not the current one.
[8:29]	Gigs Taggart	this has some benefits too
[8:29]	Gigs Taggart	if you lose an attachment inside your avatar, this will make it easier to get out :)
[8:29]	Q Linden	annelin, I haven't added up just the viewer, but over all of SL there are about 1 million lines of code.
[8:29]	Annelin Corrigible	ok thank you
[8:29]	Gigs Taggart	newview$ cat *.cpp | wc -l 276350
[8:30]	Gigs Taggart	there's just the main viewer
[8:30]	Gigs Taggart	without counting llimage or common
[8:30]	Q Linden	So that's about what you'd expect for a large graphics application.
[8:31]	Q Linden	Large, but manageable.
[8:31]	Gigs Taggart	I suspect we could drop about 20KLOC :)
[8:31]	Gigs Taggart	with a good refactoring
[8:31]	Q Linden	Gigs, it's a good day when I write negative lines of code. :-)
[8:31]	Gigs Taggart	hehe
[8:32]	Q Linden	Ok, so I'll keep an eye on this one.
[8:32]	Gigs Taggart	cool, yeah I'll post the patch to SLDEV when I get the picking sorted in a way that really works 100% of the time
[8:33]	Q Linden	Sounds great
[8:33]	Gigs Taggart	I'm being extra picky (as it were) on this one because it's something people use all day every day
[8:33]	Gigs Taggart	I really want to get the regressions down to 0
[8:33]	Q Linden	;-) Please do -- everything you can do makes it easier to take internally. Also, consider writing test plans as part of the submission.
[8:33]	Gigs Taggart	(Except that bounding box constraint)
[8:34]	Gigs Taggart	sure, the camera has about a dozen or two test cases
[8:34]	Gigs Taggart	hehe
[8:34]	Gigs Taggart	it's not an easy part of the code to change
[8:34]	Gigs Taggart	but I'm hoping in the end this will solve a lot of problems
[8:35]	Gigs Taggart	many of the camera movement bugs filed
[8:35]	Q Linden	Me too.
[8:35]	Q Linden	Ok, sun's up and I should probably get moving.
[8:35]	Q Linden	Thank you both for coming!
[8:35]	Annelin Corrigible	:)
[8:35]	Annelin Corrigible	that was a pleasure
[8:35]	Gigs Taggart	alright
[8:35]	Gigs Taggart	later!
[8:35]	Q Linden	For me too. See you!