Open Grid Protocol
Note: This page references the current draft of the Open Grid Protocol. Also available in HTML and PDF
Open Grid Protocol
- Draft 2
- June 2008
- Notice: This draft is for public comment.
- Mark Lentczner (Zero Linden) Linden Lab zero.linden@secondlife.com
- Copyright 2008, Linden Lab. All rights reserved.
- This work is licensed under the Creative Commons Attribution-Share Alike 3.0 license. See http://creativecommons.org/licenses/by-sa/3.0/for details.
- All contributions to this document must be contributed under the Second Life Project Contribution Agreement. See http://wiki.secondlife.com/wiki/Project:Contribution_Agreementfor details
- Abstract
- The Second Life Open Grid Protocol documents define the protocols by which a vast, Internet wide virtual world can operate. This protocol enables different regions of the virtual world to be operated independently, yet interoperate to form a cohesive experience.
- Status
- As of Summer 2008, this protocol is a work in progress. While the major structural elements have been designed, the specific elements for many needed resources have not. This work is being undertaken by Linden Lab and its community based Architecture Working Group.
- This protocol is being defined in light of feature set of Second Life. For now, where this document is currently lacking details, familiarity with Second Life will be assumed. It is an express aim of this work to enable the live, gradual migration of Second Life to using this new protocol as the development proceeds.
Structure
Domains
This protocol is about a three way interaction between viewer, agent and region in order to facilitate a shared experience between people.
The viewer is the element that senses and acts on the state of the virtual world. The viewer does so from the vantage point of an agent. An agent is persistent identity and persona that interacts in a virtual world. The agent persists and can be interacted with even when the user controlling it (though a viewer) is off-line. Regions are persistent locations in the virtual world. Multiple agents may be present in a region at the same time, and when they are they have a shared experience.
Groups of regions and agents are managed by domains. A region domain is responsible for a collection of regions. An agent domain manages agent accounts.
This protocol makes few assumptions about how a domain manages its collection of elements. In particular, it does not assume that a region will be entirely managed on a single host, nor that an agent will or won’t be managed by a single process.
It is useful to think of the “stance” that each element takes in the three-way protocol:
The viewer is the direct proxy for a human that wants to control an agent. This control can be direct as in the case of an interactive 3D viewer, or indirect as in the case of a web site that the user directs to display their agent’s status.
The agent domain is responsible for the agent itself. The persistent state of the agent is held within the agent domain, and requests to interact with the agent, even by the viewer, are mediated by the agent domain.
The region domain runs the live simulations of regions in the virtual world. The region domain manages the persistent state of these regions.
Basic Flow
The basic flow of the protocol is:
- The viewer authenticates to an agent domain for the authorized control of a particular agent.
- The viewer directs the agent domain to to place the agent in a region.
- The agent domain contacts the region domain for the region, and negotiates placement of the agent.
- The region grants access to the agent domain, which in turn passes some of that granted access on to the viewer.
At this stage, each entity will have access to many resources in the other entities. For example:
- The viewer has access to region resources that let it move the avatar.
- The region has access to viewer resources that update the state of objects in the region.
- The viewer and agent have access to resources in each other to facilitate text messaging.
Structure of the Protocol
The protocol is fundamentally composed of individual resources that can be invoked by one entity in the system upon another. Each resource is a member of a resource class that describes the syntax and semantics of invoking the resource. The bulk of this document, when complete, will describe the several hundred resource classes that make up the virtual world.
The resource classes are composed into suites that form logical groupings, though suites do not otherwise play a part in the protocol.
In order to facilitate migration from the currently running version of Second Life, legacy resources return information that allow entities to continue to communicate using the existing protocols and structures. These protocols and structures are not described by this document. It is the intention that when this work is complete, none of these legacy resources will be in use.
Agent and region domains have a few resources that are available at well known URLs. All other resources in the agent and region domains are accessed via capabilities obtained from the those few initial resources.
Since viewers are typically behind firewalls that do not allow connection, resources in the viewer are accessed by event queues held in the agent and region for the viewer. The viewer uses the “long poll” technique to efficiently proxy these inward resource invocations.
Base Protocols
Resources, HTTP & REST
All interaction between entities is through a client invoking a resource. Resources are invoked either directly via HTTP, or through an event queue.
For each resource class, this protocol defines how the client obtains the URL, the HTTP verb (or verbs) to be used, the request and response bodies (if any), and significant status codes. Resource classes are designed with REST style semantics.
In general, HTTP & REST are used as follows: The URL will be either well-known in advance or returned in a response from another resource. The latter is called a capability. Except for security reasons, URLs are always treated as opaque. Clients should not modify them. Parameters are never added to them via the query section. Resource handlers must be prepared to ignore query sections.
Resources follow general REST semantics and so respond to one of these verb sets:
|
GET |
for cacheable resources |
|
GET, PUT |
for cacheable resources that can be modified |
|
GET, PUT, DELETE |
for cacheable resources that can be modified and deleted |
|
POST |
for non-cacheable resources |
Unless otherwise stated, if a resource accepts PUT, it accepts multiple PUT invocations.
- Note: We are considering having all resources support OPTIONS
The request and response bodies are transmitted as serialized LLSD data. If a resource has no response defined, then it can return either an undefined value, an empty map, or have a zero length response body.
HTTP status codes should only be used to indicate the status of the HTTP interaction itself. In general, if the resource is reachable, and the request understood, a 2xx code should be returned.
- Note: Something about redirection - is it supported? Probably not…
HTTP headers, both for the request and the response are never part of a resource class definition. Headers are handled as per the HTTP standard.
LLSD
All data in this system is defined by LLSD. LLSD is an abstract way of talking about structured data.
- Note: The defintion of LLSD should be inlined here. Until then, reference: http://wiki.secondlife.com/wiki/LLSD
Serialization
When used as part of a protocol, LLSD is serialized into a common form. At present, the only serialization is the XML LLSD serialization. In the future, other serializations may be supported, in particular binary LLSD and JSON. The serialization format is negotiated and indicated using the normal facilities of HTTP.
The MIME type for the XML serialization of LLSD is:
application/llsd+xml
- Note: JSON only allows maps and arrays as top level elements. Do we need to impose the same restriction on LLSD as used in resource requests and responses?
Capabilities
This protocol makes extensive use of capabilities. A capability is an opaque HTTP (or HTTPS) URL used for accessing a particular resource. The provider of the resource has three logical parts: the grantor , the capability host , and the service .
The grantor uses the capability host to construct a capability that maps to the service that provides the resource, then returns that capability to the client. At some point in the future, the client invokes the capability which makes a connection to the capability host. The capability host then proxies to the service to provide the resource.
The parts that make up the provider may be separate entities or may be the same.
The client can’t invoke the resource without the capability. Typically the capability is a URL with a cryptographically secure path component. Within the capability host, this URL is mapped to the actual internal resource URL.
The client is free to hand the capability to other entities who become clients of the capability as well. Other than for the security considerations below, the client must not rely on any assumed structure of the capability URL.
Obtaining
For each resource a client wants to invoke, the capability must be obtained. In a few cases, the capability will have been expressly returned in the result of some other resource. Usually, the system uses a seed capability (see below) to request the capability for a given resource by name.
Invocation
To invoke a capability, the holder performs an HTTP transaction with the capability as the URL. The resource class the capability represents will dictate which verb (or verbs) can be used, and what the request and response bodies (if any) should be.
Lifetime & Revocation
Capabilities can be either unlimited or one-shot. Unlimited capabilities can be used multiple times, whereas one-shot can be used only once and are automatically revoked on invocation.
- Note: If we support the OPTIONS method, then invoking a one-shot with OPTIONS does not revoke it.
- Note: What about using HEAD on a one-shot?
Any capability can be revoked at will by the provider of the resource. Clients must be prepared to handle revoked capabilities. A revoked capability, when invoked must return a 4xx HTTP status code. The capability host may return a 404, even if the capability had been previously active.
Names
The resource a capability performs is identified by name. When requesting a capability, or when returning a capability, the opaque URL is identified with this name. The names of such resources are intended to be globally unique.
Names are URIs. When a name appears without a scheme component, then it is a relative URL, considered relative to the base:
http://xmlns.secondlife.com/capability/name/
While names do exhibit path-link structure, they are to be considered opaque identifiers. For example, while the following three capability names are indeed from the same sub-system, nothing should be inferred about a capability that starts with their common prefix:
- inventory/root
- inventory/folder_contents
- inventory/move_folder
While not required, this protocol prefers names that are all lower case roman letters, separated by underscores.
Seed Capability (Resource Class)
In many cases, a sub-system will return a seed capability from which other capabilities can be requested.
|
Seed Cabability | |
|
Name |
various, this is a generic resource and used in a variety of places |
|
URL |
various |
|
Verb |
POST |
|
Request |
{ capabilities: [ name1, name2, … ] } |
|
an array of the names of the capabilities being requested | |
|
Response |
{ capabilities: { name1: url1, name2: url2, … } } |
|
a map from the names requested to granted capabilities. | |
The request contains an array of all resource names for which capabilities are desired. The response contains a map with an entry for each capability granted. Note: a grantor may grant all, some or none of the requested capabilities. The grantor may also grant additional capabilities that were requested, or none at all. If the grantor grants none, the response array must be empty and the HTTP status code should still be 200.
- Note: The seed capability protocol deployed today uses the 'caps' key instead of 'capabilities'
Security
If an end-point receives a capability from an untrusted source, it is permissible for security reasons to check the following aspects of the URL before use:
- The scheme should be http: or https:.
- The authority (in particular, the resolved host name) should not resolve to ports on the local machine that aren’t publicly accessible.
Event Queues
An event queue enables an entity to invoke resources in the viewer, which cannot be directly contact via HTTP. This is usually the case because the viewer is behind a firewall that doesn’t allow incoming TCP (and hence HTTP) connections from the region or agent domains.
In such a situation, the client establishes a queue of invocation requests for resources in the viewer. At the same time, the viewer uses an event_queue/get capability to effectively tunnel the requests from the client to itself.
- Note: The event queue protocol described here matches what is deployed today, but is limited in functionality. It is expected to be superseded by a more general facility soon.
- Note: The deployed event queue on the agent domain
Restrictions
Resources accessed this way have the following restrictions:
- Resources are identified by their resource class name. With capabilities, there can be several resources in an entity that all conform to the same resource class. With event queues only one resource can exist for each resource class within the viewer. This is not usually a severe restriction.
- Note: The next three are temporary limitations in the current protocol and are expected to be removed. Resource classes that conform to these restrictions are equivalent to messages in the current Second Life protocol.
- The only verb allowed is POST.
- No response body is allowed.
- The only status codes are 200, or 500 if the queue shuts down before all events are ack’d.
Requests
The event queue is an unordered list of requests. Each request is formatted as follows:
{ message: name , body: arbitrary-data }
Basic Flow
When the viewer invokes event_queue/get , the entity replies with the list of messages that have been queued up. The viewer takes the response, breaks it apart into a series of requests that it processes on itself, as resource invocations that the entity wanted to perform. When those invocations are processed, the viewer indicates in its next invocation of event_queue/get that the previous set was completed. While it takes two resource invocations of event_queue/get to tunnel a set of invocations in the other directions, subsequent transactions are chained, since the acknowledgement of a previous set of requests is performed in the same invocation that gets the next set.
Acknowledgement
The response to event_queue/get includes a sequence number for the batch of requests. When the viewer has processed a batch of requests, acknowledges them in the next invocation of event_queue/get . If unacknowledged, the event queue in the entity may either resend the same requests batched with any new requests, or may treat them as lost.
Long Poll
Both viewers and entities must be prepared to handle use the “long poll” technique to keep the flow of requests timely. Viewers must be prepared to handle that invoking event_queue/get may take a relatively long time to return, as the entity may choose to delay responding if there are no requests pending, or if it believes it would be better to wait for more requests to queue. Entities must be prepared to handle viewers that request as soon as they are ready for events with no delay. Both sides must be prepared to handle time outs and retries.
Closing the Queue
When the viewer is ready to terminate the queue, meaning that it wishes to be done accepting requests, it may signal such by including the done flag in the next invocation of event_queue/get . This value is purely advisory, but enables entities to cleanly flush remaining events, and release resources.
Event Queue Get (Resource Class)
This resource is a capability both in the agent and in the region, for implementing a tunneled series of resource invocations from the entity back to the client:
|
Event Queue Get | |
|
Name |
event_queue/get |
|
URL |
capability |
|
Verb |
POST |
|
Request |
{ ack: sequence-number , done: done-flag } |
|
On the first invocation for a given resource, sequence-number must be undef. If done-flag is true, then the client is signaling its intention to stop polling if there are no more events. | |
|
Response |
{ id: sequence-number , events: [ requests , … ] } |
|
See above for format of requests. Events may be empty.See above for format of requests. Events may be empty. | |
Agent Domain Authentication
Authentication
When the viewer log into the agent, it must authenticate itself by presenting credentials that prove the viewer has the right to control the agent.
Credentials
The log in system supports an extensible structure for providing credentials. Credentials are presented as an LLSD map, with the type key indicating the type of credential. There are two types of credentials defined.
Agent Credential
These credentials provide the password that is associated with a particular agent.
{ type: “agent”, first_name: string , last_name: string , password: string }
password is the string “$1$” prepended to the MD5 hash of the agent’s password
::Note: The deployed authentication service does not currently separate credentials from the rest of the authentication arguments. See Resource Class notes for details.
Account Credential
These credentials provide the password that is associated with a user account on the agent domain. The account may be associated with one or more agents.
{ type: “account”, account_name: account , password: password }
password is the string “$1$” prepended to the MD5 hash of the agent’s password
- Note: This is not yet implemented.
Challenge-Response
Credential systems that are based on a password can be made to use a dynamically generated challenge value from the agent domain. In these cases, the viewer attempts login, omitting the password value, expecting it to fail. The failure contains the challenge to use in reattempting login. Then the viewer reattempts login, supplying the response computed from the challenge as follows:
{ type: “agent”, first_name: first , last_name: last , response: response }
{ type: “account”, account_name: account , response: response }
response is the SHA1 hash of the concatenation of the challenge, the password and the challenge again.
Choosing an Agent
The credential presented by the viewer may be valid for more than one agent. If so, then the viewer must specify the agent it wishes to control. If none is specified, and there are multiple possible agents, then log in will fail, and contain a list of possible agents. The viewer can then choose and reattempt login.
URL
Each agent domain must have a well known and published agent authentication URL.
The Second Life agent domain’s Agent Authentication URL is:
https://login.agni.lindenlab.com/cgi-bin/auth.cgi
Agent Authentication (Resource Class)
|
Agent Authentication | |
|
Name |
agent_login |
|
URL |
well known URL per agent domain |
|
Verb |
POST |
|
Request |
{ credential: credential , first_name: string , last_name: string } ::Note: Currently deployed protocol requires the following arguments: { firstname: string , lastname: string , password: string }
|
|
Optional Arguments |
{ agree_to_tos: boolean , agree_to_critical: boolean } |
|
Successful Response |
{ authenticated: boolean , agent_seed_capability: cap } |
|
login was successful ::Note: The deployed version currently returns the agent_seed_capability in the location header of a 302 HTTP Redirect. See diagram on other document <insert link here>
| |
|
Failure Response |
{ authenticated: boolean , reason: single word string , message: string } |
::Note: Deployed failure cases are signaled by a non-200 HTTP status code. Status codes 4xx meaning that login was unsuccessful. Status codes 5xx indicates server error.
| |
|
{ authenticated: "True" , reason: “maintenance”, 'maintenance_url': cap } ::Note: Not yet implemented.
| |
|
{ authenticated: "True" , reason: “critical”, 'message': Critical Message text } | |
::Note: Deployed version returns 400 status code with authenticated = "False"
| |
|
{ authenticated: "True" , reason: “tos”, 'message': Terms of Service text } | |
::Note: Deployed version returns 400 status code with authenticated = "False"
| |
|
{ authenticated: "False" , reason: “critical”, 'message': Critical Message text } | |
|
Refused to authenticate credential because of administrative requirements. | |
|
{ authenticated: :False", reason: “notice”, redirect: url } ::Note: Not yet implemented.
| |
|
{ authenticated: "False", reason: “select_agent”, agents: [ { first_name: first , last_name: last }, … ] } | |
|
credential was successful, but an agent must be selected, since the credential was valid for more than one agent. ::Note: Not yet implemented.
| |
|
{ authenticated: :False", reason: “notice”, redirect: url } | |
|
login was not successful; user should be shown the url ::Note: Not yet implemented.
| |
Legacy Login
The Legacy Login component combines part of what is considered "authentication", and part of "login" which will be replaced by Rez Avatar services. Once the agent is authenticated, a viewer can then request that the agent be placed in a region via the legacy login resource. The legacy login resource performs three functions that in the future will be broken out into separate resources:
- Supply additional information about the viewer and the connection.
- Provide various information that the viewer needs on startup about the agent and the agent domain.
- Place the agent in the initial region.
Additional Login Information
The viewer supplies the following information:
- channel
- Each viewer belongs to a particular channel of viewers, such as “release”, “release candidate”, “first look”, etc…
- version
- The version string of the viewer.
- platform
- Identifies the operating system platform: “Lin”, “Mac”, “Win”
- viewer_digest
- The MD5 hash of the viewer executable. Only relevant when the channel is set to an official Second Life viewer.
- id0
- The hardware hash (based on the serial number of the first hard drive in Windows) used for uniquely identifying computers.
- mac
- The mac address of a network interface of the computer running the viewer.
- agree_to_tos
- If the user has read and agreed to the TOS ::Note: Although this field is in authentication, the legacy path does this twice.
- read_critical
- If the user has read and dismissed a critical notification ::Note: Although this field is in authentication, the legacy path does this twice.
Agent Domain Information
The viewer can request any or all of this information from the resource. Each section of information is requested by putting the information name in the options array of the request. The corresponding data is returned in the options map of the response.
- inventory-root
- UUID of the agent’s root inventory folder.
{ folder_id: folder-id }
- inventory-skeleton
- Initial list of folders in agent’s inventory. Returned as an array of three element arrays. Each three element array describes a folder with its name, its UUID, and the UUID of the containing folder.
[ [ name, folder-id, parent-id ], … ]
- inventory-lib-root
- UUID of the agent domain’s common inventory library folder. Returned in a different format:
folder_id
- inventory-lib-owner
- Agent ID of the owner of the agent domain’s common inventory.
{ agent_id: agent-id }
- inventory_skel_lib
- Initial list of folders in agent’s inventory. Returned as an array of three element arrays. Each five element array describes a folder with its name, its UUID, the UUID of the containing folder, its type, its version.
[ [ name, folder-id, parent-id, type, version ], … ]
- gestures
- List of active gestures. Each gesture is represented as a two element array with the inventory item id and the asset id.
[ [ item-id, asset-id ], … ]
- event_categories
- List of different event categories, mapping category id (an integer) to a category name. Returned as an array of two element arrays. Each two element array describes a category’s id and it’s name.
[ [ category-id, category-name ], … ]
- event_notifications
- List of events for which the agent has pending notifications. Returned as an array of eight element arrays. Each eight element array describes an event notificiation with its id, name, description, date, x & y of the region, and x & y within the region.
[ [ event-id, name, description, date, grid-x, grid-y, x, y ], … ]
- classified_categories
- List of different classified categories, mapping category id (an integer) to a category name. Returned as an array of two element arrays. Each two element array describes a category’s id and it’s name.
[ [ category-id, category-name ], … ]
- buddy-list
- List of friends with granted and given rights masks. Returned as an array of three element arrays. Each three element list has a friend’s agent id, granted rights mask, given rights mask.
[ [ buddy-id, granted-rights, given-rights ], … ]
- ui-config
- Setting of some user interface states for the agent. Only one setting is defined: If the first life tab should be shown.
{ allow_first_life: enabled }
- login-flags
- Several flags about the state of the agent.
{ stipend_since_login: received-stipend , ever_logged_in: ever-logged-in, gendered: choosen-a-gender, daylight_savings: in-daylight-savings-time }
- global-textures
- The asset ids of several global textures:
{ sun_texture_id: asset-id, mood_texture_id: asset-id, cloud_texture_id: asset-id }
Initial Region Information
The initial region is specified as either as the agent’s home region, the agent’s last region, or as a specific region. The specification is a string with the values “first”, “last”, or the SLURL form of the region.
Result
If the login is successful, the result contains several collections of information.:
- login
- set to true if successful
- message
- Message of the day string
- seconds_since_epoch
- “Second Life” time
- first_name, last_name, agent_access, agent_id, inventory_host
- Information about the agent
- circuit_code, session_id, secure_sessions_id
- Identifiers used in the legacy message system
- start_location, look_at, region_x, region_y
- Initial placement information
- seed_capability, sim_ip, sim_port
- Connection information to initial region
Legacy Login (Resource Class)
|
Legacy Login | |
|
Name |
legacy/login |
|
URL |
capability from agent domain |
|
Verb |
POST |
|
Request |
{ start: start-loc, channel: channel , version: version , platform: platform , mac: mac-address, id0: system-hash, agree_to_tos: flag , read_critical: flag , options: [ section-name , … ] } |
|
See above for descriptions of these values. | |
|
Response |
{ login: true, message: mtod , seconds_since_epoc: time , first_name: first-name , last_name: last-name, agent_access: agent-access , agent_id: agent-id, inventory_host: host-name, circuit_code: circuit , session_id: session-uuid, secure_session_id: secure_session_id, start_location: start-loc, look_at: rotation , region_x: x , region_y: y , seed_capability: region-seed-capability, sim_ip: ip , sim_port: port } |
|
See above for descriptions of these values. | |
Login, Teleport, and Logout
The Rez Avatar resources cover all forms of agent movement in and out of regions. In particular, it covers
- Initial placement in a region after logging in
- Crossing into an adjacent region
- Teleporting from one region to another
- Removing the agent from a region when logging out
In all cases, the sequence of resource invocations follows the same form:
- Viewer asks Agent Domain to Place Avatar: rez_avatar/place
- Agent Domain asks destination region if avatar can be placed: rez_avatar/request
- Agent Domain asks current region to transfer avatar to destination: rez_avatar/derez
- Current region transfers avatar to destination: rez_avatar/rez
- Viewer establishes communication with destination region
On inital placement, the Agent Domain acts as the "current region", as it holds the saved avatar data. On log out, steps 1 and 2 are implicit in the logout request and the Agent Domain acts as the "destination region", receiving and storing the saved avatar data.
Resource Classes
Agent Information (Resource Class)
|
Agent Information | |
|
Name |
agent/info |
|
URL |
capability from agent domain |
|
Verb |
GET |
|
Response |
{ agent_id: uuid , circuit_code: int , session_id: uuid , secure_session_id: uuid , presence: { status: "online"|"offline" , region_url: url } } |
|
map of agent information for this session | |
Agent information is necessary for login and contains required information for connection to a region after Place Avatar. Presence indicates whether the agent is online and which region they are currently connected to.
Region Information (Resource Class)
|
Agent Information | |
|
Name |
region/info |
|
URL |
capability from region domain |
|
Verb |
GET |
|
Response |
{sim_ip: string , sim_port: int . region_x: int , region_y: int , region_z: int , region_id: uuid , access: 'PG' | 'Mature' } |
|
map of region information | |
Region information is necessary for login and contains required information for connection to a region after Place Avatar.
- Note: Not Implemented. See note in Place Avatar, Derez Avatar, and Rez Avatar.
Place Avatar (Resource Class)
|
Place Avatar | |
|
Name |
rez_avatar/place |
|
URL |
capability from agent domain |
|
Verb |
POST |
|
Request |
{ region_url: url string, position: [x real, y real, z real, ] } |
|
Response |
{ connect: bool , seed_capability: url string , look_at: [x real, y real, z real, ] , position: [x real, y real, z real, ]} ::Note: The deployed version includes Region Information within the response for this capability:
|
When this completes successfully, the avatar is now placed within the new region, and communications with the region can begin.
Request Rez Avatar (Resource Class)
|
Request Rez Avatar | |
|
Name |
rez_avatar/request |
|
URL |
public, well known region URL |
|
Verb |
POST |
|
Request |
{ agent_id: uuid, first_name: string , last_name: string } |
|
Optional Parameters |
{ age_verified: bool , agent_access: bool , allow_redirect: bool , god_level: int , identified: bool , transacted: bool , limited_to_estate: int , sim_access: "PG"|"Mature" } |
|
An agent domain may or may not provide this information. Region domains may or may not care about this information. | |
|
Successful Response |
{ connect: "True", rez_avatar/rez: url , seed_capability: url } |
|
Failure Response |
{ connect: False, message: string } |
|
General failure, including failure to grant seed capability. | |
Rez Avatar (Resource Class)
|
Rez Avatar | |
|
Name |
rez_avatar/rez |
|
URL |
capability returned from Request Rez Avatar |
|
Verb |
POST |
|
Request |
{ circuit_code: int, position: [x real ,y real, z real, ], secure_session_id: uuid , session_id: uuid , avatar_data: TBD } |
::Note: Format for avatar data has not been decided yet.
| |
|
Successful Response |
{ connect: "True" look_at: [x real ,y real, z real, ] , position: [x real ,y real, z real, ], rez_avatar/derez: cap } |
::Note: The deployed version also includes Region Information in the response. Derez Avatar capability is currently not returned.
| |
|
Failure Response |
{ connect: False, redirect: False, resethome: False, message: string } |
|
General failure, including failure to grant seed capability. | |
|
{ connect: False, redirect: False, resethome: True, message: string } | |
|
Need to Reset Home | |
|
{ connect: False, redirect: False, resethome: True, message: "You have been redirected to a telehub." } | |
|
Need to redirect. | |
Derez Avatar (Resource Class)
|
Derez Avatar | |
|
Name |
rez_avatar/derez |
|
URL |
capability returned from Rez Avatar ::Note: Deployed version implements this as a known public url
|
|
Verb |
POST |
|
Request |
{ rez-avatar/rez: url string, position: [x real, y real, z real, ] } ::Note: The deployed version implements 'rez_avatar' rather than 'rez-avatar/rez' as the key value for the first argument.
|
|
Successful Response |
{ connect: "True" , look_at: [x real ,y real, z real, ] , position: [x real ,y real, z real, ]} |
::Note: The deployed version also includes Region Information in the response to Derez Avatar, propagated back from Rez Avatar.
| |
|
Failed Response |
{ connect: "False" , reason: "failed to invoke rez_avatar" } |
|
{ connect: "False" , reason: "failed to finish_derez" } ::Note: Deployed version returns this error as a 400 Error.
| |
|
This includes when calls to Rez Avatar fails gracefully as well as any internal inconsistencies. | |