User:Kimm Paulino/Scripts
Simple Teleport
<lsl> // Teleports on 'left click' (touch). // // Set the coordinates to tp to in the DEST= line after these comments. // // Kimm Paulino // Sept 2009 // // Teleport bit based on the following: // // Copyright (c) 2008, Scripting Your World // All rights reserved. // // Scripting Your World // By Dana Moore, Michael Thome, and Dr. Karen Zita Haigh // http://syw.fabulo.us // http://www.amazon.com/Scripting-Your-World-Official-Second/dp/0470339837/ // // You are permitted to use, share, and adapt this code under the // terms of the Creative Commons Public License described in full // at http://creativecommons.org/licenses/by/3.0/legalcode. // That means you must keep the credits, do nothing to damage our // reputation, and do not suggest that we endorse you or your work. // // Listing 2.4: Teleport3 - Optimized Intrasim Teleport
vector DEST = <224, 213, 22>; // the teleport will be to this location vector SITPOS = <0,0,0.5>; key gAv;
moveTo(vector origin, vector destination ) { // removed jumpdist
float dist = llVecDist(origin, destination);
integer passes = llCeil( llLog(dist/10.0) / llLog(2.0) );
integer i;
list params = [PRIM_POSITION, destination];
for (i=0; i<passes; i++) {
params = (params=[]) + params + params;
}
llSetPrimitiveParams(params);
}
teleport(key av) {
if (av == NULL_KEY)
{
return;
}
vector origin = llGetPos(); llSetAlpha (0.0, ALL_SIDES); moveTo(origin, DEST); // no need to sleep -- llSetPrimParams has 0.2s delay llUnSit(av); moveTo(DEST, origin); llSetAlpha (1.0, ALL_SIDES);
}
default {
state_entry()
{
llSetClickAction (CLICK_ACTION_SIT);
llSitTarget(SITPOS, ZERO_ROTATION);
}
changed(integer changebits)
{
if (changebits & CHANGED_LINK)
{
gAv = llAvatarOnSitTarget();
if (gAv != NULL_KEY)
{
teleport(gAv);
}
}
}
} </lsl>
Die after 10 minutes
<lsl> // This will kill the prim it is in, 10 minutes after the prim has been rezzed. // // Kimm Paulino, June 2010
default {
state_entry()
{
// 10 minutes
llSetTimerEvent (600.0);
}
timer ()
{
llSetTimerEvent (0.0);
llDie();
}
} </lsl>
Simple Prim Texture Changer
<lsl> // Texture changer. Will cycle through all textures // in the prims inventory. // // Kimm Paulino // Written for Bebelou Naidoo, April 2010
float TIMER_PERIOD = 5.0; // in seconds. integer RANDOM = 1; // 0 = sequential, 1 = random
// globals integer gNumTextures; integer gLastTexture;
default {
on_rez (integer n)
{
llResetScript();
}
state_entry()
{
gLastTexture = 0;
gNumTextures = llGetInventoryNumber(INVENTORY_TEXTURE);
llSetTimerEvent(TIMER_PERIOD);
}
timer()
{
integer nextTexture;
if (RANDOM)
{
// Randomly choose one
nextTexture = (integer)llFrand (gNumTextures);
}
else
{
// Move on from the last one
gLastTexture ++;
if (gLastTexture > gNumTextures)
{
gLastTexture = 0;
}
nextTexture = gLastTexture;
}
string texture = llGetInventoryName(INVENTORY_TEXTURE, nextTexture);
llSetTexture(texture, ALL_SIDES);
}
} </lsl>
Phantom Prim Setter
<lsl> // Script to make a prim appear to be phantom, so it can be linked, etc, // without actually being phantom. // // Basic technique found on the SL forums (sorry, I can't remember where). // // Kimm Paulino // Written for Synonyme Toll, May 2010
default {
on_rez (integer start_param)
{
llResetScript();
}
state_entry()
{
// This makes the prim appear to be 'phantom like' without
// actually making it phantom ...
llVolumeDetect(TRUE);
// Now disable the script once we've done our job
llSetScriptState(llGetScriptName(), FALSE);
}
} </lsl>
Floating Script
<lsl> // Script for applying a small, random impulse to physical objects // to make them float about. // // Note: There is no bound to where the objects go, this script // is meant for objects in a physically bounded area (like a fish tank with a lid) // // Feel free to use as you wish, but do let me know if you find something // interesting to do with it ... // // Kimm Paulino // Written for Synonyme Toll, Sept 2009 //
// How often to apply the new impulse (in seconds) float IMPULSE_TIME = 3.0;
// Range for the magnitude and x, y, z directions of the impulse float IMPULSE_RANGE = 0.5;
float newRand (float range) {
// Want a random number in range +- 'range' return (llFrand(range) - (range/2.0));
}
applySmallImpulse () {
vector my_vec = llGetVel(); float my_mag = llVecMag (my_vec); vector my_dir = llVecNorm (my_vec);
// Change the magnitude slightly ...
my_mag = my_mag + newRand(IMPULSE_RANGE);
// Change the direction slightly too ...
my_dir = <my_dir.x + newRand(IMPULSE_RANGE), my_dir.y + newRand(IMPULSE_RANGE), my_dir.z + newRand(IMPULSE_RANGE)>;
vector new_vec = my_dir * my_mag;
//llOwnerSay ("Applying Impulse: " + (string)new_vec);
// apply the impulse to us llApplyImpulse (new_vec, TRUE);
}
default {
on_rez(integer n)
{
llResetScript ();
}
state_entry()
{
// Turn on Physics
llSetPrimitiveParams ([PRIM_PHYSICS, TRUE]);
// Set the boyancy to > 1.0 so that it floats
llSetBuoyancy (1.0);
// Set up a timer to apply an impulse
llSetTimerEvent (IMPULSE_TIME);
}
timer()
{
applySmallImpulse();
}
} </lsl>
Sit and Play Animation
<lsl> // Sets a sit target and plays whatever animation is // stored in the contents on the prim when someone sits down. // // Kimm Paulino // Written for Synonyme Toll, April 2010
// These numbers are totally dependent on the object containing // the script, and possibly even the animation to be used too. vector gPosition = <0.0, 0.0, 0.1>; vector gRotation = <0.0, 0.0, 0.0>; // in degrees
default {
on_rez (integer start_param)
{
llResetScript();
}
state_entry()
{
// These numbers are totally dependent on the object containing the script!
llSitTarget (gPosition, llEuler2Rot (gRotation * DEG_TO_RAD));
}
changed (integer change)
{
// When someone sits on an object, the av is considered to be
// a linked-in child prim, so the link number changes
if (change & CHANGED_LINK)
{
key av = llAvatarOnSitTarget();
if (av)
{
// yes so need to play the animation
// first request permissions - results in the callback ...
llRequestPermissions(av, PERMISSION_TRIGGER_ANIMATION);
}
}
}
run_time_permissions(integer perms)
{
// Do we have permissions to run the animations?
// results in the timer!
if(perms)
{
llSetTimerEvent(1.0);
}
else
{
llSetTimerEvent(0.0);
}
}
timer()
{
key av = llAvatarOnSitTarget();
// If the av is still sitting, play the animation stored in the prim
if (av)
{
llStopAnimation("sit");
llStartAnimation( llGetInventoryName( INVENTORY_ANIMATION, 0 ));
}
else
{
// stop playing the animations for sitting if the av
// is no longer sitting ...
llStopAnimation("sit_generic");
}
}
} </lsl>
Move up and down
<lsl> // Makes an object go up or down, gradually, when touched. // In order to make it a gradual movement, it uses a physical // object, which means it might be a little wobbly ... // // Kimm Paulino // Written for Nicollette Arabello, November 2009 //
integer gState; integer DOWN=0; integer GO_UP=1; integer UP=2; integer GO_DOWN=3;
float MOVE_DAMPING=4.0; float MOVE_TIME=4.0;
// Move to 1m above starting position vector gOffset = <0.0, 0.0, 1.0>; vector gStartPosition;
default {
state_entry()
{
// Use physics so that can use MoveToTarget
gStartPosition = llGetPos ();
// Stop the object rotating
llSetStatus(STATUS_ROTATE_X|STATUS_ROTATE_Y|STATUS_ROTATE_Z, FALSE);
llSetStatus(STATUS_PHYSICS, TRUE);
llMoveToTarget (gStartPosition, MOVE_DAMPING);
llSetTimerEvent (MOVE_TIME);
}
on_rez(integer n)
{
llResetScript();
}
timer ()
{
if (gState == DOWN)
{
gState = GO_UP;
llMoveToTarget(gStartPosition + gOffset, MOVE_DAMPING);
gState = UP;
}
else if (gState == UP)
{
gState = GO_DOWN;
llMoveToTarget(gStartPosition, MOVE_DAMPING);
gState = DOWN;
}
}
} </lsl>
Simple Door
<lsl> // Was asked to modify an existing door script. I was just given // this to update so afraid I can't give credit, but if you know where // the original came from, do let me know. // // Swinging door LSL script #1 // Handles the touch event. // Handles the collision event. // Handles closing the door automatically via a timer event. // Triggers sounds when the door opens or closes. // // Updated by Kimm Paulino, April 2010, for Synonyme Toll, // to use local coords for the rotations instead of global // coords. // // Updated by Kimm Paulino, May 2010, for Synonyme Toll, // to use messages to link two doors together. // // Note: For this to work, you need a door with a path cut // of 0.375 to 0.875 and a width that is twice as wide // as you need (the cut brings it back down to the right // size). Without this, it will just rotate on the spot, // not swing at the edge. //
// Parameters you might want to change
float delay = 3.0; // time to wait before automatically closing door
// set to 0.0 to not automatically close
float direction = 1.0; // set to 1.0 or -1.0 to control direction the door swings float volume = 0.5; // 0.0 is off, 1.0 is loudest integer linked_doors = 0; // set to 1 if using this script in a linked set of doors float angle = 90.0; // angle to open in degrees integer coll_detect = 1; // set to 1 to make door open on approach
// Variables you will most likely leave the same
key open_sound = "cb340647-9680-dd5e-49c0-86edfa01b3ac"; key close_sound = "e7ff1054-003d-d134-66be-207573f2b535";
// KP: Link send/recv functions // IMPORTANT // If you only have one pair of doors using this script, then // these will be fine. If you have several doors using this // script that you don't want all opening together, then // you'll have to change these to something unique. // integer LINK_MSG_NUM = 452345; string LINK_MSG_STR_OPEN = "Open the door"; string LINK_MSG_STR_CLOSE = "Close the door";
linkSend (string dir) {
if (linked_doors)
{
// Note: Could try to work out the link numbers of the doors,
// but simplest is to send to all other prims in the build.
llMessageLinked (LINK_ALL_OTHERS, LINK_MSG_NUM, dir, NULL_KEY);
}
}
integer linkRecv (integer sender_num, integer num, string str, key id, string str_to_check) {
if (linked_doors)
{
// Check it really is a message for these doors
if (num == LINK_MSG_NUM)
{
if (str == str_to_check)
{
// All good
return 1;
}
}
}
// not for us
return 0;
}
// Processing for the script when it first starts up
default {
// What we do when we first enter this state
state_entry() {
state open; // Move to the open state
}
}
// Processing for the script when it is in the closed state
state closed {
// What we do when we first enter this state
state_entry() {
llTriggerSound(close_sound, volume); // Trigger the sound of the door closing
llSetLocalRot(llEuler2Rot(<0, 0, direction * angle * DEG_TO_RAD>) * llGetLocalRot());
}
// What we do when the door is clicked (”touched”) with the mouse
touch_start(integer total_number) {
linkSend (LINK_MSG_STR_OPEN); // KP: Tell everyone else we are now in the open state
state open; // Move to the open state
}
// What to do when something hits the door
collision_start(integer total_number)
{
if (coll_detect != 0)
{
linkSend (LINK_MSG_STR_OPEN); // KP: Tell everyone else we are now in the open state
state open; // Move to the open state
}
}
// KP: Handle link messages
link_message (integer sender_num, integer num, string str, key id)
{
if (linkRecv (sender_num, num, str, id, LINK_MSG_STR_OPEN))
{
state open; // Move to the open state
}
}
// What to do when the timer goes off
timer()
{
llSetTimerEvent(0.0); // Set the timer to 0.0 to turn it off
}
}
// Processing for the script when it is in the open state
state open {
// What we do when we first enter this state
state_entry() {
llTriggerSound(open_sound, volume);// Trigger the sound of the door opening
llSetLocalRot(llEuler2Rot(<0, 0, -direction * angle * DEG_TO_RAD>) * llGetLocalRot());
llSetTimerEvent(delay); // Set the timer to automatically close it }
// What do do when pulling the door from Inventory if it was saved while open
on_rez(integer start_param) {
state closed;
}
// What we do when the door is clicked (”touched”) with the mouse
touch_start(integer total_number) {
linkSend (LINK_MSG_STR_CLOSE); // KP: Tell everyone else we are now in the open state
state closed; // Move to the closed state
}
// What to do when something hits the door
collision_start(integer total_number)
{
// Do nothing, the door is already open
}
// KP: Handle link messages
link_message (integer sender_num, integer num, string str, key id)
{
if (linkRecv (sender_num, num, str, id, LINK_MSG_STR_CLOSE))
{
state closed; // Move to the open state
}
}
// What to do when the timer goes off
timer()
{
llSetTimerEvent(0.0); // Set the timer to 0.0 to turn it off
state closed; // Move to the closed state
}
} </lsl>