Difference between revisions of "LlDialog"

From Second Life Wiki
Jump to navigation Jump to search
(It's not surprising that many people say, "I looked on the Wiki for help, but it just confused me" !!)
m
Line 259: Line 259:


dialog_channel = channel(); // somewhere in actual script execution, such as state_entry()</lsl>
dialog_channel = channel(); // somewhere in actual script execution, such as state_entry()</lsl>
'''Note:''' Since this function uses public information to generate the channel number it should by no means considered secret.
'''Note:''' Since this function uses public information to generate the channel number it should by no means considered secret.


This is an alternate version, as the version above uses positive channels and may in rare cases, intersect with channel 0, the DEBUG_CHANNEL, and other such channelsThis version returns a channel number between -1073741823 (0xBFFFFFFF) and -2147483648 (0x80000000).  It is also only one line of code.
The preceding code can produce both positive and negative channels, depending on the 8th to last character of the key.
The following examples will always produce negative channels:-
<lsl>
    gChannel = 0x80000000 | (integer)("0x"+(string)llGetKey());
    gChannel = 0x80000000 | (integer)("0x"+(string)llGetOwner());
</lsl>
 
This next version returns a channel number between -1073741823 (0xBFFFFFFF) and -2147483648 (0x80000000).  It is also only one line of code.
<lsl>privchan = ((integer)("0x"+llGetSubString((string)llGetKey(),-8,-1)) & 0x3FFFFFFF) ^ 0xBFFFFFFF;</lsl>
<lsl>privchan = ((integer)("0x"+llGetSubString((string)llGetKey(),-8,-1)) & 0x3FFFFFFF) ^ 0xBFFFFFFF;</lsl>



Revision as of 07:54, 9 January 2013

Summary

Function: llDialog( key avatar, string message, list buttons, integer channel );

Shows a dialog box in the lower right corner of the avatar's screen (upper right in Viewer 1.x) with a message and choice buttons, as well as an ignore button. This has many uses ranging from simple message delivery to complex menu systems.

• key avatar avatar UUID that is in the same region
• string message message to be displayed in the dialog box
• list buttons button labels
• integer channel output chat channel, any integer value

When a button is pressed, the avatar says the text of the button label on channel.
The position where the chat is generated is where the root prim of the dialog generating object was when the dialog button was pressed.

Button Order
9   10 11
6 7 8  
3 4 5
0 1 2

Caveats

  • This function causes the script to sleep for 1.0 seconds.
  • There is no way by script to kill a dialog box.
  • There is no way for the script to detect if the user clicked the small "Ignore" button (no chat is generated as a result of pressing this button).
  • There is no way to distinguish the input from a dialog box and regular chat made by the same user.
    • It is important to expect that the response may not be one of the buttons.
  • If the distance between the root prim of the listening object and the dialog generating prim is greater than 20 meters when a button is pressed, the response will not be heard. See #Limits.
    • This limitation affects attachments too if the wearer moves more than 20 meters from where the listener is located. See #Limits.
    • In one very specific circumstance the dialog button press is heard sim-wide: If the listener resides in the same script that created the dialog and if the dialog's user is the owner of the prim that spawns, and listens to the dialog.

  • The dialog response (the generated chat) has its in world location at the root prim's global position.
It can generate a listen event within 20 meters from that position.
  • The listening location for a child prim in the object is either at the child prim's location or at the root prim's location
see bugtrace JIRA SCR-43

message limits

  • message must be fewer than 512 bytes in length and be not empty. If it is empty, llDialog will shout "llDialog: must supply a message" on the DEBUG_CHANNEL. If you want to create an empty message, however, you can do it legally by using a line feed as your message, as in <lsl>llDialog(avatar_key," \n",button_list,dialog_channel);</lsl> If the message length is greater than or equal to 512 bytes, it shouts (again on the debug channel): "llDialog: message too long, must be less than 512 characters"; in both instances, the dialog box will not be created for avatar.
  • The client only displays 8 lines of message. If it is longer, the dialog has a scroll bar. See #Appearance.

Note: this should be 7 lines in message; one of the 8 lines is the owner and name of the object.

buttons limits

  • If buttons is an empty list, it will default to as if it were ["OK"]
  • If a button is named "Ignore", it will behave like the small "Ignore" button of the menu (i.e. pressing it will *not* get "Ignore" sent to the menu channel). If you need an "Ignore" button in your menu and wish to have its name sent back to the script when you press it, then use spaces in the button name (e.g. " Ignore ").
  • An error will be shouted on DEBUG_CHANNEL, if...
    • there are more than 12 buttons.
    • any list item is not a string.
    • any list item string length (measured in bytes, using UTF-8 encoding) is zero or greater than 24.
      • In other words, a button's text when encoded as UTF-8 cannot be longer than 24 bytes or a empty string.
  • The client will not display all the characters of a button if the text is wider than the text space of the button. See #Appearance.
  • If the script generates button labels from outside sources like inventory or object names, take care to avoid the special string "!!llTextBox!!". This text, in button 0, will cause llDialog to behave as llTextBox instead.

Important Issues

~ All Issues ~ Search JIRA for related Bugs
   Only the latest of multiple dialogs remains available (Viewer 2.0 Beta)

Examples

<lsl> // When the prim is touched, give the toucher the option of killing the prim.

integer gListener; // Identity of the listener associated with the dialog, so we can clean up when not needed

default {

   touch_start(integer total_number)
   {
       // get the UUID of the person touching this prim
       key user = llDetectedKey(0);
       // Send a dialog to that person. We'll use a fixed negative channel number for simplicity
       llDialog(user, "\nDo you wish this prim to die?", ["Yes", "No" ] , -99);
       // Listen to any reply from that user only, and only on the same channel used by llDialog
       gListener = llListen(-99, "", user, "");
       // Start a one-minute timer, after which we will stop listening for responses
       llSetTimerEvent(60.0);
   }
   listen(integer chan, string name, key id, string msg)
   {
       // If the user clicked the "Yes" button, kill this prim.
       if (msg == "Yes")
           llDie();
       // The user did not click "Yes" ...
       // Make the timer fire immediately, to do clean-up actions
       llSetTimerEvent(0.1);        
   }
   timer()
   {
       // Stop listening. It's wise to do this to reduce lag
       llListenRemove(gListener);
       // Stop the timer now that its job is done
       llSetTimerEvent(0.0);
   }

} </lsl>

KBcaution.png Important: Please make sure that you close open listeners where possible. You'll make the Second Life experience so much better when paying attention to details here.
KBcaution.png Important: There are no built-in submenus nor pagination (like in a list with "previous" and "next") when using llDialog. You simply get one page with a max of 12 buttons, that's it. If you want a different dialog menu layout (other info and/or other buttons), you'll have to build that functionality into your script as the example below demonstrates.

<lsl> string mainMenuDialog = "\nWhich settings would you like to access?\nClick \"Close\" to close the menu.\n\nYou are here:\nMainmenu"; list mainMenuButtons = ["sub 01", "sub 02", "Close"];

string subMenu_01_Dialog = "\nClick \"Close\" to close the menu.\nClick \"-Main-\" to return to the main menu.\n\nYou are here:\nMainmenu > sub 01"; list subMenu_01_Buttons = ["action 01a", "action 01b", "Close", "-Main-"];

string subMenu_02_Dialog = "\nClick \"Close\" to close the menu.\nClick \"-Main-\" to return to the main menu.\n\nYou are here:\nMainmenu > sub 02";

list subMenu_02_Buttons = ["action 02a", "action 02b", "Close", "-Main-"];

integer dialogChannel; integer dialogHandle;

open_menu(key inputKey, string inputString, list inputList) {

   dialogChannel = (integer)llFrand(DEBUG_CHANNEL)*-1;
   dialogHandle = llListen(dialogChannel, "", inputKey, "");
   //llListenControl(dialogHandle,TRUE);
   llDialog(inputKey, inputString, inputList, dialogChannel);
   llSetTimerEvent(30.0);

}

close_menu() {

   llSetTimerEvent((float)FALSE);
   //llListenControl(dialogHandle,FALSE);
   llListenRemove(dialogHandle);
   dialogHandle = FALSE;
   dialogChannel = (integer)llFrand(DEBUG_CHANNEL)*-1;

}

default {

   on_rez(integer start_param)
   {
       llResetScript();
   }
   touch_start(integer total_number)
   {
       key id = llDetectedKey(0);
       open_menu(id, mainMenuDialog, mainMenuButtons);
   }
   listen(integer channel, string name, key id, string message)
   {
       if(channel != dialogChannel)
           return;
       close_menu();
       if(message == "-Main-")
           open_menu(id, mainMenuDialog, mainMenuButtons);
       else if(message == "sub 01")
           open_menu(id, subMenu_01_Dialog, subMenu_01_Buttons);
       else if(message == "sub 02")
           open_menu(id, subMenu_02_Dialog, subMenu_02_Buttons);
       else if (message == "action 01a")
       {
           //do something
           open_menu(id, subMenu_01_Dialog, subMenu_01_Buttons);
       }
       else if (message == "action 01b")
       {
           //do something else
           //maybe not re-open the menu for this option?
           //open_menu(id, subMenu_01_Dialog, subMenu_01_Buttons);
       }
       else if (message == "action 02a")
       {
           //do something
           open_menu(id, subMenu_02_Dialog, subMenu_02_Buttons);
       }
       else if (message == "action 02b")
       {
           //do something else
           open_menu(id, subMenu_02_Dialog, subMenu_02_Buttons);
       }
   }
   timer()
   {
       close_menu();
   }

}

</lsl>

Useful Snippets

Helper Functions:

•  uDlgBtnPagList Compact Pagination for llDialog lists, remenu, and multi-user support

Notes

To use dialog boxes to make menu systems, see Dialog Menus: A step by step guide (aimed at learners).

Tips

It is a good idea to use a very negative channel (if never more negative than the most negative 32-bit integer that is -2,147,483,648), e.g., <lsl>// Create random channel within range [-1000000000,-2000000000] integer channel = (integer)(llFrand(-1000000000.0) - 1000000000.0);

llDialog(llDetectedKey(0), "Please choose one of the below options:",

   ["Yes", "No", "0", "1"], channel);</lsl>

Negative channels are popular for script communications because the client is unable to chat directly on those channels ("/-xxxx message" won't chat "message" on channel "-xxxx", it will chat "/-xxxx message" on channel zero). The only way to do so prior to llTextBox was to use llDialog which was limited to 24 bytes.

You can be reasonably confident that all of your scripted objects have a unique chat channel with this small function:

<lsl>integer dialog_channel; // top of script in variables

integer channel() { // top of script in functions

   return (integer)("0x"+llGetSubString((string)llGetKey(),-8,-1));

}

dialog_channel = channel(); // somewhere in actual script execution, such as state_entry()</lsl>

Note: Since this function uses public information to generate the channel number it should by no means considered secret.

The preceding code can produce both positive and negative channels, depending on the 8th to last character of the key. The following examples will always produce negative channels:- <lsl>

   gChannel = 0x80000000

See Also

Events

•  listen

Functions

•  llListen
•  llTextBox
•  llRegionSay
•  llWhisper Sends chat limited to 10 meters
•  llSay Sends chat limited to 20 meters
•  llShout Sends chat limited to 100 meters
•  llInstantMessage Sends chat to the specified user
•  llOwnerSay Sends chat to the owner only

Articles

•  Dialog Menus: A step by step guide A walk through of the entire dialog menu process (aimed at learners).

Deep Notes

All Issues

~ Search JIRA for related Issues
   Only the latest of multiple dialogs remains available (Viewer 2.0 Beta)
   llDialog user button with text "Ignore" is treated like client "Ignore" button and is dropped when clicked.
   llDialog menus can fail when an object is deeded to a group

Footnotes

  1. ^ Channel zero is also known as: PUBLIC_CHANNEL, open chat, local chat and public chat

Signature

function void llDialog( key avatar, string message, list buttons, integer channel );