| CameraAngle || [[Radians]] || Camera Field-of-View angle, diagonal. Equivalent to Angle of View - width degrees to equate a real lens. This changes the '''visible''' FoV.
| CameraAngle || [[Radians]] || Camera Field-of-View angle, horizontal. Equivalent to Angle of View - width degrees to equate a real lens. This changes the '''visible''' FoV.
|-
|-
| CameraDoFResScale || Linear || Amount to scale down resolution of DoF effect. Manipulating this value may change performance.
| CameraDoFResScale || Linear || Amount to scale down resolution of DoF effect. Manipulating this value may change performance.
|-
|-
| CameraFieldOfView || Degrees || '''Angle-of-View''' angle used for the DoF effect. Note that this value is the '''height''' AoV, NOT width.
| CameraFieldOfView || Degrees || Field-of-View angle used for the DoF effect. Note that this value is the '''height''' FoV, NOT width.
|-
|-
| CameraFNumber || F Stop || F Stop (or Aperture) value to be simulated by DoF effect. '''This is the value you should change to adjust the intensity of the DoF effect.'''
| CameraFNumber || F Stop || F Stop (or Aperture) value to be simulated by DoF effect. '''This is the value you should change to adjust the intensity of the DoF effect.'''
Revision as of 12:14, 6 June 2022
The table below contains settings for simulating various real-life lenses within Second Life. These settings will change the camera's Field of View (FoV), as well as Depth of field (DoF) settings. You may want to play around with some of these settings (for example, the Aperture value) to manipulate the depth-of-field effect.
Tip: The default Second Life camera is roughly equivalent to a full frame digital (36x24mm sensor) camera using 31mm lens.
For reference, the following table describes the debug settings changed, their units, and what the setting does. Default values are not provided as these settings may vary between viewers.
Camera Field-of-View angle, horizontal. Equivalent to Angle of View - width degrees to equate a real lens. This changes the visible FoV.
CameraDoFResScale
Linear
Amount to scale down resolution of DoF effect. Manipulating this value may change performance.
CameraFieldOfView
Degrees
Field-of-View angle used for the DoF effect. Note that this value is the height FoV, NOT width.
CameraFNumber
F Stop
F Stop (or Aperture) value to be simulated by DoF effect. This is the value you should change to adjust the intensity of the DoF effect.
CameraFocalLength
mm
Focal length of the lens to be simulated by the DoF effect.
CameraMaxCoF
mm*1000
Lens Circle of Confusion value to be simulated by the DoF effect.
CameraFocusTransitionTime
Seconds
Time the camera will take to transition between 2 focal planes.
Editor note: The below settings assume that the screen is in the 16:9 aspect ratio - These values vary depending on aspect ratio, so if you have a screen of a different ratio, you may need to recalculate these values.
Note: To manipulate the intensity of the Depth-of-Field effect, change the aperture (F number) value. Common values are: 1.4, 2, 2.8, 4, 8, 12, 16, 20, 24
