Combined Library

Combined Library

The Combined Library is comprised of about 40 functions all of which are released under CC-by v3.0 license.

The library is still being worked on so only some of the compiled functions will be posted at this time. All functions in the library are hand optimized. To understand the logic, it is best to pull the code apart but be wary of LSL's strict order of operations.

String Functions

Replace

The design of the logic had to overcome two hurdles. The first was keeping it from searching previous replacements (otherwise you could fall into an infinite loop or infinitely grow the memory). The second was so that it could do null replacements. Both of these hurdles were overcome but at the cost of some readability.

The way it works is it keeps an Unsearched Buffer (UB) which is a subset of the Input Buffer (IB) and it records the Position of the UB in the IB (P). Each iteration it searches the UB and adds that resulting index to the P, then it uses P as the index to replace that section in the IB, finally it recalculates the new P, then is uses IB with the new P to update UB.

string str_replace(string src, string from, string to)
{//replaces all occurrences of 'from' with 'to' in 'src'.
    integer len = (~-(llStringLength(from)));
    if(~len)
    {
        string  buffer = src;
        integer b_pos = -1;
        integer to_len = (~-(llStringLength(to)));
        @loop;//instead of a while loop, saves 5 bytes (and run faster).
        integer to_pos = ~llSubStringIndex(buffer, from);
        if(to_pos)
        {
//            b_pos -= to_pos;
//            src = llInsertString(llDeleteSubString(src, b_pos, b_pos + len), b_pos, to);
//            b_pos += to_len;
//            buffer = llGetSubString(src, (-~(b_pos)), 0x8000);
            buffer = llGetSubString(src = llInsertString(llDeleteSubString(src, b_pos -= to_pos, b_pos + len), b_pos, to), (-~(b_pos += to_len)), 0x8000);
            jump loop;
        }
    }
    return src;
}

Trim

string TrimRight(string src, string chrs)
{//Trims characters from the right end of the string
    integer i = llStringLength(src);
    do;while(~llSubStringIndex(chrs, llGetSubString(src, i = ~ -i, i)) && i);
    return llDeleteSubString(src, -~i, 0xFFFF);
}

string TrimLeft(string src, string chrs)
{//Trims characters from the left end of the string
    integer i = ~llStringLength(src);
    do;while(i && ~llSubStringIndex(chrs, llGetSubString(src, (i = -~i), i)));
    return llDeleteSubString(src, 0xFFFF0000, ~-i);
}

string TrimBoth(string src, string chrs)
{//Trims characters from both ends of the string
    integer i = ~llStringLength(src);
    do;while(i && ~llSubStringIndex(chrs, llGetSubString(src, (i = -~i), i)));
    i = llStringLength(src = llDeleteSubString(src, 0xFFFF0000, (~-(i))));
    do;while(~llSubStringIndex(chrs, llGetSubString(src, (i = ~-i), i)) && i);
    return llDeleteSubString(src, (-~(i)), 0xFFFF);
}

Unicode functions

LSL uses UTF8 to as the base format for strings. UTF8 is an encoding system for storing Unicode characters, each Unicode character has a number. These functions allow for the conversion between the string form and the integer form. They may not be pretty but they are tight and get the job done quickly.

UTF8 to Unicode Integer

Converts a character into it an integer.

integer UTF8ToUnicodeInteger(string input)
{
    integer result = llBase64ToInteger(llStringToBase64(input = llGetSubString(input,0,0)));
    if(result & 0x80000000)//multibyte, continuing to use base64 is impractical because it requires smart shifting.
        return  (   (  0x0000003f &  result       ) |
                    (( 0x00003f00 &  result) >> 2 ) | 
                    (( 0x003f0000 &  result) >> 4 ) | 
                    (( 0x3f000000 & (result = (integer)("0x"+llGetSubString(input,-8,-1)))) >> 6 ) | 
                    (( 0x0000003f &  result) << 24) | 
                    (( 0x00000100 & (result = (integer)("0x"+llDeleteSubString(input = (string)llParseString2List(llEscapeURL(input),(list)"%",[]),-8,-1)))) << 22)
                ) & (  0x7FFFFFFF >> (5 * ((integer)(llLog(~result) / 0.69314718055994530941723212145818) - 25)));
//                    (( 0x00000100 & (result = (integer)("0x"+llDeleteSubString(input,-8,-1)))) << 22)
//                ) & (  0x7FFFFFFF >> (30 - (5 * (llStringLength(input = (string)llParseString2List(llEscapeURL(input),(list)"%",[])) >> 1))));
    return result >> 24;
}

Unicode Integer to UTF8

Convert an integer into a character.

string UnicodeIntegerToUTF8(integer input)
{
    integer bytes = llCeil(llLog(input) / 0.69314718055994530941723212145818);
    string result = "%" + byte2hex((input >> (6 * bytes)) | ((0x3F80 >> bytes) << !(bytes = ((input >= 0x80) * (bytes + (((1 << bytes) - input) <= 0) - 2 ) / 5))));
    while (bytes)
        result += "%" + byte2hex((((input >> (6 * (bytes = ~-bytes))) | 0x80) & 0xBF));
    return llUnescapeURL(result);
}

string byte2hex(integer x)
{//Helper function for use with unicode characters.
    return llGetSubString(hexc, x = ((x >> 4) & 0xF), x) + llGetSubString(hexc, x & 0xF, x & 0xF);
}//This function would benifit greatly from the DUP opcode, it would remove 19 bytes.

string hexc="0123456789ABCDEF";

List Functions

Replace

The design of the logic had to overcome two hurdles. The first was keeping it from searching previous replacements (otherwise you could fall into an infinite loop or infinitely grow the memory). The second was so that it could do null replacements. Both of these hurdles were overcome but at the cost of some readability.

The way it works is it keeps an Unsearched Buffer (UB) which is a subset of the Input Buffer (IB) and it records the Position of the UB in the IB (P). Each iteration it searches the UB and adds that resulting index to the P, then it uses P as the index to replace that section in the IB, finally it recalculates the new P, then is uses IB with the new P to update UB.

list ListReplace(list src, list from, list to)
{//replaces all occurrences of 'from' with 'to' in 'src'.
    integer len = ~([] != from);
    if(~len)
    {
        list  buffer = src;
        integer b_pos = -1;
        integer to_len = ~([] != to);
        @loop;//instead of a while loop, saves 5 bytes (and run faster).
        integer to_pos = ~llListFindList(buffer, from);
        if(to_pos)
        {
//            b_pos -= to_pos;
//            src = llListReplaceList(src, to, b_pos, b_pos + len);
//            b_pos += to_len;
//            buffer = llList2List(src, (-~(b_pos)), 0x4000);
            buffer = llList2List(src = llListReplaceList(src, to, b_pos -= to_pos, b_pos + len), (-~(b_pos += to_len)), 0x4000);
            jump loop;
        }
    }
    return src;
}

Compare

Compares two lists, returns true if identical.

Note: It will ignore the sign on zero (0.0 == -0.0). If the sign on zero is important to you, follow the instructions in the comments on how to enable checking for this. Currently no functions in LSL treat negative zero differently then positive zero.

integer ListCompare(list input_a, list input_b)
{
    integer b = input_a != input_b;
    if(!b)
    {
        if((b = [] != input_a))
        {
            integer counter = b;
            do
            {
                if((b = llGetListEntryType(input_a,counter)) - llGetListEntryType(input_b,counter))
                    jump end_a;
                //Don't need to bother with TYPE_KEY
                if(b == TYPE_FLOAT) {
                    if((b = (llList2Float(input_a,counter) != llList2Float(input_b,counter))))
                        jump end_b;
                } else if(b == TYPE_VECTOR) {//it costs more to update b and jump out then to just return
                    if((b = (llList2Vector(input_a,counter) != llList2Vector(input_b,counter))))//so just return.
                        jump end_c;
                } else if(b == TYPE_ROTATION) {
                    if((b = (llList2Rot(input_a,counter) != llList2Rot(input_b,counter))))
                        jump end_d;
                }
                else//comment this line out if you care about the sign on zero.
                    if((b = (llList2String(input_a,counter) != llList2String(input_b,counter))))
                        jump end_e;
            }while((counter = -~counter));
            //if you get here, b equals zero, so we don't even have to change it's value for the return.
        }
    }
    @end_a;@end_b;@end_c;@end_d;@end_e;
    return !b;
}