Difference between revisions of "ZZText"

Revision as of 02:59, 7 June 2009

What is it

Scripting tools to allow display of text on a prim: XyText 1.5 (aka XyText) , XyzzyText, XyyyyzText, XyzzyText-UTF8, ZZText

ZZText is a low-prim, low-lag, international variation of XyText with the following features:

can be enhanced with new fonts or UTF-8 characters using GIMP and python-fu.
uses only 35 textures instead of 66 for the 10 chars on prim solution (this gives a bit less quality then the original xytext, but under normal situations is acceptable.

Rationale: if you have problems with prim usage, then you can accept this compromise.

this particular combination of textures gives something way more rapid than XyzzyText, which is very slow for big boards, and less lagger than XyText.
small warning: there is still some slight improvements for this zzText to be reasonably acceptable (consider it in a Beta stage), will post soon when it will be fully acceptable.

Credits and copyright

ZZText is heavily dependent on XyText so it shares and extends credits and copyrights.

Also this is a low prim variation of the XyzzyText-UTF8 page but downgraded to use XyText lower quality paradigm instead than the 1 character face approach.

How to generate the textures

You need to have GIMP 2.0 with python-fu extension installed

Here the instructions on windows to do that:
- Install python 2.6.2 from http://www.python.org/download/, 
- RESTART the PC!!
- Install gtk+ run time environment from: http://sourceforge.net/project/showfiles.php?group_id=71914
- Install python extensions to graphic libs. Be sure to choose the 2.6.2 python compatibility
- Install pycairo from http://ftp.gnome.org/pub/GNOME/binaries/win32/pycairo/
- Install pygobject from http://ftp.gnome.org/pub/GNOME/binaries/win32/pygobject/
- Install pygtk from http://ftp.acc.umu.se/pub/GNOME/binaries/win32/pygtk/
- RESTART the PC!!
- Install gimp 2.6.6 from http://gimp.org/
- Verify launching gimp, filters, python-fu, console to see Python 2.6.2

Use the mega-image maker python-fu script (see following sections)
Use the splitter python-fu script to produce 512x512 guides for later splitting
Use the filter/web/slice... button to produce 64 slices in png format to retain transparence (from 0-0 to 7-7)
Manually remove the empty slices (the i-j where j>i for instance 2-3, 6-7) so you have only 35 images png.
Manually convert each png to tga (this is solving some problems with sl uploading regarding transparence)
Upload the textures keeping the order 0-0 1-0 1-1 2-0 2-1 2-3 .... until 7-7)

Manual parts can be automated by another python-fu, but I was so exhausted with the others that it was ok for me doing manually :)

There is still some fix needed to do on the python-fu script. Currently characters are still a bit unevenly put so that when displaying them depending on which couple using we might see some slight asymmetric unbalancing. You can note this only when looking very closely to the chars. Whenever I fix myself this problem I will post here.

For those of you who already accept fonts I did last week, look at next sections for the 35 texture UUIDs:

So how can I use it?

Put the script named ZZText into each prim of your board naming each cell 1000 ---- 1099 as far as you need cells
Have a main script doing the following: llMessageLinked(LINK_SET,1040,"çòàùè",NULL_KEY) to write on cell named 1040

To divide in rows, use simple modulus operations.

Variation on XyText 1.5 standard script

For not being so difficult to follow, I only publish differences between my script and XyText 1.5 so that you might be able to understand better what I did:

Change CHARACTER_GRID with our full permission textures

list    CHARACTER_GRID  = [
        "96f4578b-879e-44ae-d223-427cc615f5a4", // my slice-0-0
        "eab5360f-6653-593f-b679-69c68b0dd001", // 1-0
        "367330be-717a-277d-5205-131cd6ded458", // 1-1
        "32046675-6e7e-2425-ce77-69000b0b4d96", // 2-0
        "40085901-bde6-2dd4-40cd-b6d48d242997", // 2-1
        "205d318b-09b7-7ecc-922e-801c93a546c8", // 2-2
        "841e7826-3645-d4f0-d48b-389586dd8e90", // 3-0
        "e2db78c5-fb47-d767-4744-8cb6d84610d0", // 3-1
        "15312c89-afd4-854c-9d9b-5b9e11844aed", // 3-2
        "d180e771-0393-d09b-8cac-0af6d550ae4a", // 3-3
        "c6c1d2c8-5dfd-b13a-7f1e-c3ede8126769", // 4-0
        "bc100d0c-a445-947f-caa4-285d9cc8a9de", // 4-1
        "0b31e862-75a4-9ed3-6331-e9e700a0fedb", // 4-2
        "0eacc306-6bd5-ab31-de47-c686141a6733", // 4-3
        "b68de1d9-4890-74a0-4d25-d4d5c83a0dba", // 4-4
        "04b2bf9b-a8bb-0a39-1062-9b005229eba9", // 5-0
        "be293f10-25ec-beb9-738b-fe1892b82aef", // 5-1
        "5e9c8317-71f5-f073-76ab-7c412d3acb84", // 5-2
        "030b441b-9022-2aba-f7a7-af6810c354b8", // 5-3
        "9f455858-8ae6-3a9a-c2d4-bc5ee92430ac", // 5-4
        "ee741143-f01e-f730-667e-66a3cd57d1cc", // 5-5
        "710282bc-bd80-5a44-6987-0c4c11a4c294", // 6-0
        "c9c410db-675a-1e98-4107-debd3c73a754", // 6-1
        "486c2336-71c5-b962-266c-838a865c067c", // 6-2
        "d4722155-0b6d-3673-0208-a727729bc117", // 6-3
        "bc7af3cd-ee48-08df-fe8b-a6ca8a425733", // 6-4
        "f23d7a73-00c3-1ffd-69a7-0cca031c939d", // 6-5
        "aa95bfd1-ac80-f962-7acf-d6aeed9c7e81", // 6-6
        "53fd52e3-0e8b-dcc8-42f8-332aef421bd2", // 7-0
        "da3f6f09-3e3a-e156-8e2e-1040111a5635", // 7-1
        "409a95c0-b685-2036-d0de-75e8ab654243", // 7-2
        "14e05aca-3a61-b892-3632-dcde72324779", // 7-3
        "546c0e4f-b678-895d-2035-0f39bb7f4979", // 7-4
        "cf2fc337-109f-ba25-8ff5-786f7d6ceb5b", // 7-5
        "9943204b-a4de-868a-3cdd-8785d1864ede", // 7-6
        "765cfd9c-9703-b5ba-2c5d-f1c8bd44e0f4"  // 7-7
          ];

Enabling answering to only a specific channel instead of DISPLAY_STRING channel

This heavily helps in producing multi cell boards:

integer ME;
....
state_entry(){
....
 ME=(integer)llGetObjectName(); // need that each cell has its own number as object name starting from 1000 for instance
....
// be sure we are answering only to channel ME
link_message(integer sender, integer channel, string data, key id) {
        if (channel == (ME) {
            RenderString(data);
            return;
        }

UTF-8 character specification

This must closely match what you produced with python-fu

ResetCharIndex() {
    gCharIndex  = " !\"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`";
    // \" <-- Fixes LSL syntax highlighting bug.
    gCharIndex += "abcdefghijklmnopqrstuvwxyz{|}~";
  //        cap cedille      u:         e/            a^         a:          a/         a ring      cedille     e^           e:
  decode=  ["%C3%87", "%C3%BC", "%C3%A9", "%C3%A2", "%C3%A4", "%C3%A0", "%C3%A5", "%C3%A7", "%C3%AA", "%C3%AB",
  
    
  //                    e\           i:               i^            i\                A:          A ring          E/              ae           AE           marker >
       "%C3%A8", "%C3%AF", "%C3%AE", "%C3%AC", "%C3%84", "%C3%85", "%C3%89", "%C3%A6", "%C3%86", "%E2%96%B6" ,

  //                 o:               o/           u^          u\              y:               O:             U:          cent           pound        yen
       "%C3%B6", "%C3%B2", "%C3%BB", "%C3%B9", "%C3%BF", "%C3%96", "%C3%9C", "%C2%A2", "%C2%A3", "%C2%A5",
   
  //                 A^              a/              i/                o/            u/              n~           E:            y/              inv ?         O^
       "%C3%82", "%C3%A1", "%C3%AD", "%C3%B3", "%C3%BA", "%C3%B1", "%C3%8B", "%C3%BD", "%C2%BF", "%C3%94",

  //                   inv !             I\             I/           degree       E^              I^            o^            U^
       "%C2%A1", "%C3%8C", "%C3%8D", "%C2%B0", "%C3%8A", "%C3%8E", "%C3%B4", "%C3%9B",

  //                     Y:          euro           german ss         E\              A\           A/              U\           U/               O\           O/
       "%C3%9D", "%E2%82%AC", "%C3%9F", "%C3%88", "%C3%80", "%C3%81", "%C3%99", "%C3%9A", "%C3%92", "%C3%93",

  //                   Sv           sv             zv             Zv              Y:             I:
       "%C5%A0", "%C5%A1", "%C5%BE", "%C5%BD", "%C3%9D", "%C3%8C" ];
     
    
}

Accessing the new characters from textures

This is the most difficult part. Still need to clean up offsets, since now they are still a bit wrong.

vector GetGridOffset(vector grid_pos) {
    // Zoom in on the texture showing our character pair.
    integer Col = llRound(grid_pos.x) % 40; // PK was 20
    integer Row = llRound(grid_pos.y) % 20; // PK was 10

    // Return the offset in the texture.
    return <-0.45 + 0.025 * Col, 0.45 - 0.05 * Row, 0.0>; // PK was 0.05 and 0.1
}

ShowChars(vector grid_pos1, vector grid_pos2, vector grid_pos3, vector grid_pos4, vector grid_pos5) {
   // Set the primitive textures directly.
     
               
   llSetPrimitiveParams( [
        PRIM_TEXTURE, FACE_1, GetGridTexture(grid_pos1), <0.125, 0.05, 0>, GetGridOffset(grid_pos1) + <0.0375-0.025-0.002, 0.025, 0>, 0.0,
        PRIM_TEXTURE, FACE_2, GetGridTexture(grid_pos2), <0.05, 0.05, 0>, GetGridOffset(grid_pos2)+<-0.025-0.002, 0.025,0>, 0.0,
        PRIM_TEXTURE, FACE_3, GetGridTexture(grid_pos3), <-0.74, 0.05, 0>, GetGridOffset(grid_pos3)+ <-.34-0.002, 0.025, 0>, 0.0,
        PRIM_TEXTURE, FACE_4, GetGridTexture(grid_pos4), <0.05, 0.05, 0>, GetGridOffset(grid_pos4)+<-0.025-0.002, 0.025,0>, 0.0,
        PRIM_TEXTURE, FACE_5, GetGridTexture(grid_pos5), <0.125, 0.05, 0>, GetGridOffset(grid_pos5) + <0.0375-0.025-0.077-0.002, 0.025, 0>, 0.0
//        PRIM_TEXTURE, FACE_1, GetGridTexture(grid_pos1), <0.25, 0.1, 0>, GetGridOffset(grid_pos1) + <0.075, 0, 0>, 0.0,
//        PRIM_TEXTURE, FACE_2, GetGridTexture(grid_pos2), <0.1, 0.1, 0>, GetGridOffset(grid_pos2), 0.0,
//        PRIM_TEXTURE, FACE_3, GetGridTexture(grid_pos3), <-1.48, 0.1, 0>, GetGridOffset(grid_pos3)+ <0.37, 0, 0>, 0.0,
//        PRIM_TEXTURE, FACE_4, GetGridTexture(grid_pos4), <0.1, 0.1, 0>, GetGridOffset(grid_pos4), 0.0,
//        PRIM_TEXTURE, FACE_5, GetGridTexture(grid_pos5), <0.25, 0.1, 0>, GetGridOffset(grid_pos5) - <0.075, 0, 0>, 0.0
        
        ]);
}

integer GetIndex(string char)
{
    integer  ret=llSubStringIndex(gCharIndex, char);
    if(ret>=0) return ret;
    
    // special char do nice trick :)
    string escaped=llEscapeURL(char);
    
    if(escaped=="%E2%80%99") return 7; // remap ’
    //llSay(0,"Looking for "+escaped);
    integer found=llListFindList(decode, [escaped]);
    
    // not found
    if(found<0) return 0;
    
    // return correct index
    return llStringLength(gCharIndex)+found;
    
}

RenderString(string str) {
    // Get the grid positions for each pair of characters.
    vector GridPos1 = GetGridPos( GetIndex(llGetSubString(str, 0, 0)),
                                  GetIndex(llGetSubString(str, 1, 1)) );
    vector GridPos2 = GetGridPos( GetIndex(llGetSubString(str, 2, 2)),
                                  GetIndex(llGetSubString(str, 3, 3)) );
    vector GridPos3 = GetGridPos( GetIndex(llGetSubString(str, 4, 4)),
                                  GetIndex(llGetSubString(str, 5, 5)) );
    vector GridPos4 = GetGridPos( GetIndex(llGetSubString(str, 6, 6)),
                                  GetIndex(llGetSubString(str, 7, 7)) );
    vector GridPos5 = GetGridPos( GetIndex(llGetSubString(str, 8, 8)),
                                  GetIndex(llGetSubString(str, 9, 9)) );                                   

    // Use these grid positions to display the correct textures/offsets.
    ShowChars(GridPos1, GridPos2, GridPos3, GridPos4, GridPos5);
}

Splitter python-fu script

Very simple just tell him the 512 splitting and it will create guides.

#!/usr/bin/env python

import math
from gimpfu import *

def python_guides(timg, tdrawable, interval=100):
    timg.undo_group_start()
    x=0
    while x < timg.width:
       timg.add_vguide(x)
       x+=interval
       
    y=0
    while y < timg.height:
       timg.add_hguide(y)
       y+=interval
       
    timg.undo_group_end()
    
    gimp.displays_flush()

register(
        "python_fu_guides",
        "Guides: this will split the images in sections...",
        "Guides: this will split the images in sections...",
        "Salahzar Stenvaag",
        " ",
        "2008",
        "<Image>/Filters/Guides...",
        "RGB*, GRAY*",
        [
                (PF_INT, "interval", "Interval", 100)
        ],
        [],
        python_guides)

main()

Mega-image maker python-fu script

If you need your characters you need to change the UTF-8 codings in "decode" var

#! /usr/bin/env python
from gimpfu import *

# you can remove logging, I used it to be sure program was working since it can be a bit slow 
# to generate all the combination
def python_log_init():
    fileHandle = open( 'python.log', 'w')
    fileHandle.close()
    
def python_log(s):
    fileHandle = open ( 'python.log', 'a' )
    fileHandle.write(str(s)+"\n")
    fileHandle.close() 

def python_xytext2(font,color,size,limit):
  """Print the arguments on standard output"""
  python_log_init()
  python_log("font: %s color: <%d,%d,%d> size: %d limit: %d" % ( font, color[0], color[1], color[2], size, limit ))
  chars = " !\"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghijklmnopqrstuvwxyz{|}~"
  
  
  # 
  
  #        cap cedille      u:         e/            a^         a:          a/         a ring      cedille     e^           e:
  decode=  ["\xC3\x87", "\xC3\xBC", "\xC3\xA9", "\xC3\xA2", "\xC3\xA4", "\xC3\xA0", "\xC3\xA5", "\xC3\xA7", "\xC3\xAA", "\xC3\xAB" ]  
  
    
  #                    e\           i:               i^            i\                A:          A ring          E/              ae           AE           marker >
  decode+=["\xC3\xA8", "\xC3\xAF", "\xC3\xAE", "\xC3\xAC", "\xC3\x84", "\xC3\x85", "\xC3\x89", "\xC3\xA6", "\xC3\x86", "\xE2\x96\xB6" ]

  #                 o:               o/           u^          u\              y:               O:             U:          cent           pound        yen
  decode+=["\xC3\xB6", "\xC3\xB2", "\xC3\xBB", "\xC3\xB9", "\xC3\xBF", "\xC3\x96", "\xC3\x9C", "\xC2\xA2", "\xC2\xA3", "\xC2\xA5"]
   
  #                 A^              a/              i/                o/            u/              n~           E:            y/              inv ?         O^
  decode+=["\xC3\x82", "\xC3\xA1", "\xC3\xAD", "\xC3\xB3", "\xC3\xBA", "\xC3\xB1", "\xC3\x8B", "\xC3\xBD", "\xC2\xBF", "\xC3\x94" ] 

  #                   inv !             I\             I/           degree       E^              I^            o^            U^
  decode+=["\xC2\xA1", "\xC3\x8C", "\xC3\x8D", "\xC2\xB0", "\xC3\x8A", "\xC3\x8E", "\xC3\xB4", "\xC3\x9B" ]

  #                     Y:          euro           german ss         E\              A\           A/              U\           U/               O\           O/
  decode+=["\xC3\x9D", "\xE2\x82\xAC", "\xC3\x9F", "\xC3\x88", "\xC3\x80", "\xC3\x81", "\xC3\x99", "\xC3\x9A", "\xC3\x92", "\xC3\x93"   ]                  

  #                   Sv           sv             zv             Zv              Y:             I:
  decode+=[ "\xC5\xA0", "\xC5\xA1", "\xC5\xBE", "\xC5\xBD", "\xC3\x9D", "\xC3\x8C" ]
 
 
  width=5120
  height=5120
  img = gimp.Image(width, height, RGB)
  layer = gimp.Layer(img, "my font", width, height, RGB_IMAGE, 100, NORMAL_MODE)
  img.add_layer(layer, 0)
  layer.add_alpha()
  gimp.set_foreground(color)
  pdb.gimp_selection_all(img)
  pdb.gimp_edit_clear(layer)
  pdb.gimp_selection_none(img)
  size= 20 # 23 # 21.3 # 30
  
  index=0
  numtot=len(chars)+len(decode)
  #numtot=50
  if limit>0: numtot=limit
  deltay=12.8 # 13.8215 # 12.8 # 18
  deltax=25.6 # 27.6432 # 25.6 # 36
  maxchars=len(chars)
  for first in range(numtot):
  
     if(first<maxchars): 
        el1=chars[first]
     else:
        el1=decode[first-maxchars]
     
     python_log(str(first)+"/"+str(numtot)+":  "+el1)
     for second in range(first+1):

          # to save time removed function call
          if(second<maxchars): 
             el2=chars[second]
          else:
             el2=decode[second-maxchars]
                 
          y=second * deltay * 2 # horizontal distance
          x=first*deltax # line distance
          pdb.gimp_text_fontname(img,layer,y,x,el1,0,TRUE,size,PIXELS,font)
          pdb.gimp_text_fontname(img,layer,y+deltay,x,el2,0,TRUE,size,PIXELS,font)
          
          index=index+1
          
  
  # Now ready to display this image
  img.merge_visible_layers(0)
  gimp.Display(img)
   

register(
  "xytext2", "", "", "", "", "",
  "<Toolbox>/Xtns/_XyText2Char", "",
  [
  (PF_FONT, "font", "Font to use", "Arial"),
  (PF_COLOR,"color","Color to use", (255,255,255) ),
  (PF_INT,    "size", "Font size", 45          ),
  (PF_INT,  "limit", "limit font generation ", 0  ),
 
  ],
  [],
  python_xytext2
  )

main()

What if I want the full script?

Here you are:

////////////////////////////////////////////
// ZZText (5 Face, Multi Texture)
//
// Originally Written by Xylor Baysklef
//
// Modified by Thraxis Epsilon January 20, 2006
// Added Support for 5 Face Prim, based on modification
// of XyText v1.1.1 by Kermitt Quick for Single Texture.
//
// Modified by Salahzar Stenvaag for International and new textures
// produced with GIMP. See wiki page ZZText for further info
// Obtain ME (starting linking channel from Object name)
// thane can use all the other commands
// IDEAL for linked structures
////////////////////////////////////////////

/////////////// CONSTANTS ///////////////////
// XyText Message Map.
integer DISPLAY_STRING      = 0;
integer DISPLAY_EXTENDED    = 100;
integer REMAP_INDICES       = 200;
integer RESET_INDICES       = 300;
integer SET_CELL_INFO       = 400;
integer SET_THICKNESS       = 600;
integer SET_COLOR           = 700;

// This is an extended character escape sequence.
string  ESCAPE_SEQUENCE = "\\e";

// This is used to get an index for the extended character.
string  EXTENDED_INDEX  = "123456789abcdef";

// Face numbers.
integer FACE_1          = 3;
integer FACE_2          = 7;
integer FACE_3          = 4;
integer FACE_4          = 6;
integer FACE_5          = 1;

list decode=[]; // to handle special characters from CP850 page for european countries

// Used to hide the text after a fade-out.
key     TRANSPARENT     = "701917a8-d614-471f-13dd-5f4644e36e3c";
// This is a list of textures for all 2-character combinations.
list    CHARACTER_GRID  = [
    "96f4578b-879e-44ae-d223-427cc615f5a4", // my slice-0-0
    "eab5360f-6653-593f-b679-69c68b0dd001", // 1-0
    "367330be-717a-277d-5205-131cd6ded458", // 1-1
    "32046675-6e7e-2425-ce77-69000b0b4d96", // 2-0
    "40085901-bde6-2dd4-40cd-b6d48d242997", // 2-1
    "205d318b-09b7-7ecc-922e-801c93a546c8", // 2-2
    "841e7826-3645-d4f0-d48b-389586dd8e90", // 3-0
    "e2db78c5-fb47-d767-4744-8cb6d84610d0", // 3-1
    "15312c89-afd4-854c-9d9b-5b9e11844aed", // 3-2
    "d180e771-0393-d09b-8cac-0af6d550ae4a", // 3-3
    "c6c1d2c8-5dfd-b13a-7f1e-c3ede8126769", // 4-0
    "bc100d0c-a445-947f-caa4-285d9cc8a9de", // 4-1
    "0b31e862-75a4-9ed3-6331-e9e700a0fedb", // 4-2
    "0eacc306-6bd5-ab31-de47-c686141a6733", // 4-3
    "b68de1d9-4890-74a0-4d25-d4d5c83a0dba", // 4-4
    "04b2bf9b-a8bb-0a39-1062-9b005229eba9", // 5-0
    "be293f10-25ec-beb9-738b-fe1892b82aef", // 5-1
    "5e9c8317-71f5-f073-76ab-7c412d3acb84", // 5-2
    "030b441b-9022-2aba-f7a7-af6810c354b8", // 5-3
    "9f455858-8ae6-3a9a-c2d4-bc5ee92430ac", // 5-4
    "ee741143-f01e-f730-667e-66a3cd57d1cc", // 5-5
    "710282bc-bd80-5a44-6987-0c4c11a4c294", // 6-0
    "c9c410db-675a-1e98-4107-debd3c73a754", // 6-1
    "486c2336-71c5-b962-266c-838a865c067c", // 6-2
    "d4722155-0b6d-3673-0208-a727729bc117", // 6-3
    "bc7af3cd-ee48-08df-fe8b-a6ca8a425733", // 6-4
    "f23d7a73-00c3-1ffd-69a7-0cca031c939d", // 6-5
    "aa95bfd1-ac80-f962-7acf-d6aeed9c7e81", // 6-6
    "53fd52e3-0e8b-dcc8-42f8-332aef421bd2", // 7-0
    "da3f6f09-3e3a-e156-8e2e-1040111a5635", // 7-1
    "409a95c0-b685-2036-d0de-75e8ab654243", // 7-2
    "14e05aca-3a61-b892-3632-dcde72324779", // 7-3
    "546c0e4f-b678-895d-2035-0f39bb7f4979", // 7-4
    "cf2fc337-109f-ba25-8ff5-786f7d6ceb5b", // 7-5
    "9943204b-a4de-868a-3cdd-8785d1864ede", // 7-6
    "765cfd9c-9703-b5ba-2c5d-f1c8bd44e0f4"  // 7-7
        ];
integer ME;
///////////// END CONSTANTS ////////////////

///////////// GLOBAL VARIABLES ///////////////
// All displayable characters.  Default to ASCII order.
string gCharIndex;
// This is the channel to listen on while acting
// as a cell in a larger display.
integer gCellChannel      = -1;
// This is the starting character position in the cell channel message
// to render.
integer gCellCharPosition = 0;
// This is whether or not to use the fade in/out special effect.
integer gCellUseFading      = FALSE;
// This is how long to display the text before fading out (if using
// fading special effect).
// Note: < 0  means don't fade out.
float   gCellHoldDelay      = 1.0;
/////////// END GLOBAL VARIABLES ////////////

ResetCharIndex() {
    gCharIndex  = " !\"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`";
    // \" <-- Fixes LSL syntax highlighting bug.
    gCharIndex += "abcdefghijklmnopqrstuvwxyz{|}~";
    //        cap cedille      u:         e/            a^         a:          a/         a ring      cedille     e^           e:
    decode=  ["%C3%87", "%C3%BC", "%C3%A9", "%C3%A2", "%C3%A4", "%C3%A0", "%C3%A5", "%C3%A7", "%C3%AA", "%C3%AB",


        //                    e\           i:               i^            i\                A:          A ring          E/              ae           AE           marker >
        "%C3%A8", "%C3%AF", "%C3%AE", "%C3%AC", "%C3%84", "%C3%85", "%C3%89", "%C3%A6", "%C3%86", "%E2%96%B6" ,

        //                 o:               o/           u^          u\              y:               O:             U:          cent           pound        yen
        "%C3%B6", "%C3%B2", "%C3%BB", "%C3%B9", "%C3%BF", "%C3%96", "%C3%9C", "%C2%A2", "%C2%A3", "%C2%A5",

        //                 A^              a/              i/                o/            u/              n~           E:            y/              inv ?         O^
        "%C3%82", "%C3%A1", "%C3%AD", "%C3%B3", "%C3%BA", "%C3%B1", "%C3%8B", "%C3%BD", "%C2%BF", "%C3%94",

        //                   inv !             I\             I/           degree       E^              I^            o^            U^
        "%C2%A1", "%C3%8C", "%C3%8D", "%C2%B0", "%C3%8A", "%C3%8E", "%C3%B4", "%C3%9B",

        //                     Y:          euro           german ss         E\              A\           A/              U\           U/               O\           O/
        "%C3%9D", "%E2%82%AC", "%C3%9F", "%C3%88", "%C3%80", "%C3%81", "%C3%99", "%C3%9A", "%C3%92", "%C3%93",

        //                   Sv           sv             zv             Zv              Y:             I:
        "%C5%A0", "%C5%A1", "%C5%BE", "%C5%BD", "%C3%9D", "%C3%8C" ];


}

vector GetGridPos(integer index1, integer index2) {
    // There are two ways to use the lookup table...
    integer Col;
    integer Row;
    if (index1 >= index2) {
        // In this case, the row is the index of the first character:
        Row = index1;
        // And the col is the index of the second character (x2)
        Col = index2 * 2;
    }
    else { // Index1 < Index2
        // In this case, the row is the index of the second character:
        Row = index2;
        // And the col is the index of the first character, x2, offset by 1.
        Col = index1 * 2 + 1;
    }
    return <Col, Row, 0>;
}

string GetGridTexture(vector grid_pos) {
    // Calculate the texture in the grid to use.
    integer GridCol = llRound(grid_pos.x) / 40; // PK was 20
    integer GridRow = llRound(grid_pos.y) / 20; // PK was 10

    // Lookup the texture.
    key Texture = llList2Key(CHARACTER_GRID, GridRow * (GridRow + 1) / 2 + GridCol);
    return Texture;
}

vector GetGridOffset(vector grid_pos) {
    // Zoom in on the texture showing our character pair.
    integer Col = llRound(grid_pos.x) % 40; // PK was 20
    integer Row = llRound(grid_pos.y) % 20; // PK was 10

    // Return the offset in the texture.
    return <-0.45 + 0.025 * Col, 0.45 - 0.05 * Row, 0.0>; // PK was 0.05 and 0.1
}

ShowChars(vector grid_pos1, vector grid_pos2, vector grid_pos3, vector grid_pos4, vector grid_pos5) {
    // Set the primitive textures directly.


    llSetPrimitiveParams( [
        PRIM_TEXTURE, FACE_1, GetGridTexture(grid_pos1), <0.125, 0.05, 0>, GetGridOffset(grid_pos1) + <0.0375-0.025-0.002, 0.025, 0>, 0.0,
        PRIM_TEXTURE, FACE_2, GetGridTexture(grid_pos2), <0.05, 0.05, 0>, GetGridOffset(grid_pos2)+<-0.025-0.002, 0.025,0>, 0.0,
        PRIM_TEXTURE, FACE_3, GetGridTexture(grid_pos3), <-0.74, 0.05, 0>, GetGridOffset(grid_pos3)+ <-.34-0.002, 0.025, 0>, 0.0,
        PRIM_TEXTURE, FACE_4, GetGridTexture(grid_pos4), <0.05, 0.05, 0>, GetGridOffset(grid_pos4)+<-0.025-0.002, 0.025,0>, 0.0,
        PRIM_TEXTURE, FACE_5, GetGridTexture(grid_pos5), <0.125, 0.05, 0>, GetGridOffset(grid_pos5) + <0.0375-0.025-0.077-0.002, 0.025, 0>, 0.0
            //        PRIM_TEXTURE, FACE_1, GetGridTexture(grid_pos1), <0.25, 0.1, 0>, GetGridOffset(grid_pos1) + <0.075, 0, 0>, 0.0,
            //        PRIM_TEXTURE, FACE_2, GetGridTexture(grid_pos2), <0.1, 0.1, 0>, GetGridOffset(grid_pos2), 0.0,
            //        PRIM_TEXTURE, FACE_3, GetGridTexture(grid_pos3), <-1.48, 0.1, 0>, GetGridOffset(grid_pos3)+ <0.37, 0, 0>, 0.0,
            //        PRIM_TEXTURE, FACE_4, GetGridTexture(grid_pos4), <0.1, 0.1, 0>, GetGridOffset(grid_pos4), 0.0,
            //        PRIM_TEXTURE, FACE_5, GetGridTexture(grid_pos5), <0.25, 0.1, 0>, GetGridOffset(grid_pos5) - <0.075, 0, 0>, 0.0

            ]);
}

integer GetIndex(string char)
{
    integer  ret=llSubStringIndex(gCharIndex, char);
    if(ret>=0) return ret;

    // special char do nice trick :)
    string escaped=llEscapeURL(char);

    if(escaped=="%E2%80%99") return 7; // remap ’
    //llSay(0,"Looking for "+escaped);
    integer found=llListFindList(decode, [escaped]);

    // not found
    if(found<0) return 0;

    // return correct index
    return llStringLength(gCharIndex)+found;

}

RenderString(string str) {
    // Get the grid positions for each pair of characters.
    vector GridPos1 = GetGridPos( GetIndex(llGetSubString(str, 0, 0)),
        GetIndex(llGetSubString(str, 1, 1)) );
    vector GridPos2 = GetGridPos( GetIndex(llGetSubString(str, 2, 2)),
        GetIndex(llGetSubString(str, 3, 3)) );
    vector GridPos3 = GetGridPos( GetIndex(llGetSubString(str, 4, 4)),
        GetIndex(llGetSubString(str, 5, 5)) );
    vector GridPos4 = GetGridPos( GetIndex(llGetSubString(str, 6, 6)),
        GetIndex(llGetSubString(str, 7, 7)) );
    vector GridPos5 = GetGridPos( GetIndex(llGetSubString(str, 8, 8)),
        GetIndex(llGetSubString(str, 9, 9)) );

    // Use these grid positions to display the correct textures/offsets.
    ShowChars(GridPos1, GridPos2, GridPos3, GridPos4, GridPos5);
}

RenderWithEffects(string str) {
    // Get the grid positions for each pair of characters.
    vector GridPos1 = GetGridPos( llSubStringIndex(gCharIndex, llGetSubString(str, 0, 0)),
        llSubStringIndex(gCharIndex, llGetSubString(str, 1, 1)) );
    vector GridPos2 = GetGridPos( llSubStringIndex(gCharIndex, llGetSubString(str, 2, 2)),
        llSubStringIndex(gCharIndex, llGetSubString(str, 3, 3)) );
    vector GridPos3 = GetGridPos( llSubStringIndex(gCharIndex, llGetSubString(str, 4, 4)),
        llSubStringIndex(gCharIndex, llGetSubString(str, 5, 5)) );
    vector GridPos4 = GetGridPos( llSubStringIndex(gCharIndex, llGetSubString(str, 6, 6)),
        llSubStringIndex(gCharIndex, llGetSubString(str, 7, 7)) );
    vector GridPos5 = GetGridPos( llSubStringIndex(gCharIndex, llGetSubString(str, 8, 8)),
        llSubStringIndex(gCharIndex, llGetSubString(str, 9, 9)) );

    // First set the alpha to the lowest possible.
    llSetAlpha(0.05, ALL_SIDES);

    // Use these grid positions to display the correct textures/offsets.
    ShowChars(GridPos1, GridPos2, GridPos3, GridPos4, GridPos5);

    float Alpha;
    for (Alpha = 0.10; Alpha <= 1.0; Alpha += 0.05)
        llSetAlpha(Alpha, ALL_SIDES);
    // See if we want to fade out as well.
    if (gCellHoldDelay < 0.0)
        // No, bail out. (Just keep showing the string at full strength).
        return;
    // Hold the text for a while.
    llSleep(gCellHoldDelay);
    // Now fade out.
    for (Alpha = 0.95; Alpha >= 0.05; Alpha -= 0.05)
        llSetAlpha(Alpha, ALL_SIDES);
    // Make the text transparent to fully hide it.
    llSetTexture(TRANSPARENT, ALL_SIDES);
}

RenderExtended(string str) {
    // Look for escape sequences.
    list Parsed       = llParseString2List(str, [], [ESCAPE_SEQUENCE]);
    integer ParsedLen = llGetListLength(Parsed);

    // Create a list of index values to work with.
    list Indices;
    // We start with room for 6 indices.
    integer IndicesLeft = 10;

    integer i;
    string Token;
    integer Clipped;
    integer LastWasEscapeSequence = FALSE;
    // Work from left to right.
    for (i = 0; i < ParsedLen && IndicesLeft > 0; i++) {
        Token = llList2String(Parsed, i);

        // If this is an escape sequence, just set the flag and move on.
        if (Token == ESCAPE_SEQUENCE) {
            LastWasEscapeSequence = TRUE;
        }
        else { // Token != ESCAPE_SEQUENCE
            // Otherwise this is a normal token.  Check its length.
            Clipped = FALSE;
            integer TokenLength = llStringLength(Token);
            // Clip if necessary.
            if (TokenLength > IndicesLeft) {
                Token = llGetSubString(Token, 0, IndicesLeft - 1);
                TokenLength = llStringLength(Token);
                IndicesLeft = 0;
                Clipped = TRUE;
            }
            else
                IndicesLeft -= TokenLength;

            // Was the previous token an escape sequence?
            if (LastWasEscapeSequence) {
                // Yes, the first character is an escape character, the rest are normal.

                // This is the extended character.
                Indices += [llSubStringIndex(EXTENDED_INDEX, llGetSubString(Token, 0, 0)) + 95];

                // These are the normal characters.
                integer j;
                for (j = 1; j < TokenLength; j++)
                    Indices += [llSubStringIndex(gCharIndex, llGetSubString(Token, j, j))];
            }
            else { // Normal string.
                // Just add the characters normally.
                integer j;
                for (j = 0; j < TokenLength; j++)
                    Indices += [llSubStringIndex(gCharIndex, llGetSubString(Token, j, j))];
            }

            // Unset this flag, since this was not an escape sequence.
            LastWasEscapeSequence = FALSE;
        }
    }

    // Use the indices to create grid positions.
    vector GridPos1 = GetGridPos( llList2Integer(Indices, 0), llList2Integer(Indices, 1) );
    vector GridPos2 = GetGridPos( llList2Integer(Indices, 2), llList2Integer(Indices, 3) );
    vector GridPos3 = GetGridPos( llList2Integer(Indices, 4), llList2Integer(Indices, 5) );
    vector GridPos4 = GetGridPos( llList2Integer(Indices, 6), llList2Integer(Indices, 7) );
    vector GridPos5 = GetGridPos( llList2Integer(Indices, 8), llList2Integer(Indices, 9) );

    // Use these grid positions to display the correct textures/offsets.
    ShowChars(GridPos1, GridPos2, GridPos3, GridPos4, GridPos5);
}

integer ConvertIndex(integer index) {
    // This converts from an ASCII based index to our indexing scheme.
    if (index >= 32) // ' ' or higher
        index -= 32;
    else { // index < 32
        // Quick bounds check.
        if (index > 15)
            index = 15;

        index += 94; // extended characters
    }

    return index;
}

default {
    state_entry() {
        // Initialize the character index.
        ResetCharIndex();
        ME=(integer)llGetObjectName();
        //llOwnerSay("Channel:"+(string)ME);
        //llSay(0, "Free Memory: " + (string) llGetFreeMemory());
    }

    link_message(integer sender, integer channel, string data, key id) {
        if (channel == (ME+DISPLAY_STRING)) {
            RenderString(data);
            return;
        }
        if (channel == (ME+DISPLAY_EXTENDED)) {
            RenderExtended(data);
            return;
        }
        if (channel == gCellChannel) {
            // Extract the characters we are interested in, and use those to render.
            string TextToRender = llGetSubString(data, gCellCharPosition, gCellCharPosition + 9);
            if (gCellUseFading)
                RenderWithEffects( TextToRender );
            else // !gCellUseFading
                RenderString( TextToRender );
            return;
        }
        if (channel == (ME+REMAP_INDICES)) {
            // Parse the message, splitting it up into index values.
            list Parsed = llCSV2List(data);
            integer i;
            // Go through the list and swap each pair of indices.
            for (i = 0; i < llGetListLength(Parsed); i += 2) {
                integer Index1 = ConvertIndex( llList2Integer(Parsed, i) );
                integer Index2 = ConvertIndex( llList2Integer(Parsed, i + 1) );

                // Swap these index values.
                string Value1 = llGetSubString(gCharIndex, Index1, Index1);
                string Value2 = llGetSubString(gCharIndex, Index2, Index2);

                gCharIndex = llDeleteSubString(gCharIndex, Index1, Index1);
                gCharIndex = llInsertString(gCharIndex, Index1, Value2);

                gCharIndex = llDeleteSubString(gCharIndex, Index2, Index2);
                gCharIndex = llInsertString(gCharIndex, Index2, Value1);
            }
            return;
        }
        if (channel == (ME+RESET_INDICES)) {
            // Restore the character index back to default settings.
            ResetCharIndex();
            return;
        }
        if (channel == (ME+SET_CELL_INFO)) {
            // Change the channel we listen to for cell commands, and the
            // starting character position to extract from.
            list Parsed = llCSV2List(data);
            gCellChannel        = (integer) llList2String(Parsed, 0);
            gCellCharPosition   = (integer) llList2String(Parsed, 1);
            gCellUseFading      = (integer) llList2String(Parsed, 2);
            gCellHoldDelay      = (float)   llList2String(Parsed, 3);
            return;
        }
        if (channel == (ME+SET_THICKNESS)) {
            // Set our z scale to thickness, while staying fixed
            // in position relative the prim below us.
            vector Scale    = llGetScale();
            float Thickness = (float) data;
            // Reposition only if this isn't the root prim.
            integer ThisLink = llGetLinkNumber();
            if (ThisLink != 0 || ThisLink != 1) {
                // This is not the root prim.
                vector Up = llRot2Up(llGetLocalRot());
                float DistanceToMove = Thickness / 2.0 - Scale.z / 2.0;
                vector Pos = llGetLocalPos();
                llSetPos(Pos + DistanceToMove * Up);
            }
            // Apply the new thickness.
            Scale.z = Thickness;
            llSetScale(Scale);
            return;
        }
        if (channel == (ME+SET_COLOR)) {
            vector newColor = (vector)data;
            llSetColor(newColor, ALL_SIDES);
        }
    }
}