Talk:Technical issues with Mac OS X
Archived
| Help Portal: |
Avatar | Bug Fixes | Communication | Community | Glossary | Land & Sim | Multimedia | Navigation | Object | Video Tutorials | Viewer | Wiki | Misc |
Please notice that this article or section contains out-of-date information. You can help to improve the article by editing and updating it.
Using Second Life under Mac OS X
Keyboard
The Mac has two keys not found on a PC or (typical) UNIX/Linux machine:
- command (CMD) key; this is sometimes called the Apple or propeller (⌘) key
- option (OPT) key; this is equivalent to (but not 'the same' as) the PC's ALT key
WARNING! It is strongly suggested that you do not use the CMD key for keyboard shortcuts. Quite a few of the CMD shortcuts have meaning to Mac OS and will cause unexpected results. You should execute all keyboard shortcuts using the CTRL key. Reserve the use of the CMD key for right-clicking -- see below.
One-button Mouse
The standard Mac installation has a single-button mouse. For a typical Mac application - as well as when interacting with Mac OS X - a right-click is achieved in one of three ways:
- CTRL-click
- buy Apple's Mighty Mouse and configure it for two-button operation
- use any generic, USB 2-button mouse
WARNING! The Second Life client viewer handles mouse operations differently!
For the typical Mac app and in the OS, you use ...
- SH-click to select a span of items
- CMD-click to select/deselect items in a span/group
- CTRL-click to right-click
In Second Life, you use ...
- SH-click to select a span of items
- CTRL-click to select/deselect items in a span/group
- CMD-click to right-click
Optimizing the Second Life viewer for Mac
Based on Resident experience, it seems the lowest Mac configuration that is acceptable for Second Life is a PowerBook G4 or iBook G4 with a 1GHz processor, 768MB RAM and a 64MB Video card.
The only features listed here are the ones that will greatly impact your user experience.
Preferences ➙ Tab:Graphics
| Feature/Setting | Minimal Mac System Mac OS X 10.4.x/Tiger, G4, 1 GHz 512-768 MB RAM, 64 MB shared video memory |
Typical Mac System Mac OS X 10.5.x/Leopard, Intel, 2 GHz 1 GB RAM, 128 MB video memory |
Comment |
|---|---|---|---|
| Display Resolution➝ Run in window |
checked | checked | Keep auto-detect Earlier releases of the client were more stable if run in a window. Instability claim requires verification in current release, 1.19.0 (5). |
| Display Resolution➝ Fullscreen Aspect Ratio |
leave as set by the client | leave as set by the client | --- |
| Display Resolution➝ Auto detect |
checked | checked | --- |
| Draw Distance | 96 meters | 128 meters | Needless to say, a greater draw distance will affect client performance. You may want to alter this 'on the fly' depending on your in-world location and desires. |
Preferences ➙ Tab:Graphics Detail
| Feature/Setting | Minimal Mac System Mac OS X 10.4.x/Tiger, G4, 1 GHz 512-768 MB RAM, 64 MB shared video memory |
Typical Mac System Mac OS X 10.5.x/Leopard, Intel, 2 GHz 1 GB RAM, 128 MB video memory |
Comment |
|---|---|---|---|
| Shaders➝ Enable Vertex Shaders |
unchecked | checked | Performance impact is negligible. |
| Shaders➝ Enable Bumpmapping and Shiny |
checked | checked | Performance impact is negligible. |
| Shaders➝ Enable Ripple Water |
unchecked | unchecked | This can have a severe impact on viewer performance. Save this for a high-end Macintosh machine. |
| Lighting Detail | Nearby local lights | Nearby local lights | Performance impact is negligible; make sure you're using the latest OpenGL drivers for your platform. |
| Terrain Detail | checked | checked | Performance impact is negligible; make sure you're using the latest OpenGL drivers for your platform. |
| Object Mesh Detail | middle | middle-high | Make sure you're using the latest OpenGL drivers for maximum performance. |
| Fexible Mesh Detail | middle | middle-high | Make sure you're using the latest OpenGL drivers for maximum performance. |
| Tree Mesh Detail | middle | middle-high | This only affects Linden trees. If you're in an area which makes use of a lot of trees, a higher setting for this feature can have a significant impact on performance. Make sure you're using the latest OpenGL drivers for maximum performance. |
| Avatar Mesh Detail | middle | middle-high | Make sure you're using the latest OpenGL drivers for maximum performance. |
Preferences ➙ Tab:Advanced Graphics
| Feature/Setting | Minimal Mac System Mac OS X 10.4.x/Tiger, G4, 1 GHz 512-768 MB RAM, 64 MB shared video memory |
Typical Mac System Mac OS X 10.5.x/Leopard, Intel, 2 GHz 1 GB RAM, 128 MB video memory |
Comment |
|---|---|---|---|
| Filtering➝ Anisotropic Filtering |
unchecked | checked | Performance impact is negligible. Textures viewed at a sharp angle may look blurry with this feature turned off. |
| Enable VBO | unchecked | unchecked | Warning! Activating this feature will crash your Intel-based MacBook. In general, the OpenGL implementation for Mac OS X will make poor use of the VBO features. |
| Graphics Card Memory | leave it at maximum possible | leave it at maximum possible | You can't choose more than you have - so choose it all. |
| Max. Particle Count | 1024 | 2048 or higher | For mid-level or higher Mac platforms, a particle count above 2048 shows little impact. |
| Outfit Composite Limit | set to 3 or 4 | set to 4 or 5 | For lower-end Macs, the impact is felt most in busy (many avatar) areas. On high-end Macs, this setting's impact is negligible. |
| Note: | It's always best to keep your system up-to-date; run Software Update... regularly. |
Miscellaneous Mac issues in Second Life
Difficulty leaving 'mouselook'
There is a minor bug in the Mac user interface which causes difficulties leaving Mouselook. The Esc key is used on the Mac viewer to close the Chat type-in field, reducing the UI stripe at the bottom to a single row of buttons. This happens even if you are in Mouselook. The solution is simply to press Esc twice, the second time exits Mouselook. (By the way: Esc also returns your camera viewpoint to its default position behind your avatar, if you have been camming around.)
If you find that your Esc key does not function at all, leaving you with no way to get out of Mouselook, pressing the key combination Command-Q (for Quit) helps : it brings up the small window asking if you want to Continue or Quit. Pressing Continue brings you out of Mouselook 9 times out of 10.
Cache size is inoperative
Setting the cache size to the maximum (1 GB) has no effect; OS X overrides it and continues to 'grow' the cache irrespective. I got mine up to well over 4 GB once which had a disastrous effect on performance. It may also contribute to the next effect...
| Note: | As of SLR 1.19.0 (5), this cannot be reproduced. |
Logging In and Landing Underwater at (10,10,10)
This is usually due to an incomplete transfer to the simulator server due to low bandwidth and a large cache. Usually other people can see you normally but all you can see is an underwater view; you can't move, you can't see yourself, and you can't TP or Search. IM's may be unaffected. If this happens, 'clearing cache' from the client may be insufficient; try the following:
- logout of the SL viewer
- locate the folder ~/Library/Application Support/Second Life/cache
(Hint: hitting SH-⌘-G in the Finder and entering the given path will take you to the right location.) - select everything in this folder and delete it
- empty the trash
- reboot your computer
- log back into Second Life
Note: As your cache is rebuilt, textures may initially be slow to rez.
At this time, File➝Start/Stop Movie to Disk does not work on a Mac.
The Second Life viewer no longer directly provides the ability to capture to a movie.
The solution is to use third-party software ...
Getting more information about Second Life for Mac users
Macintosh user groups in-world
To find a Mac user group, click the Find button then the Groups tab. Type in Mac and hit Search. You can join the group from that window. Other Mac users will be happy to help you out, and group IM is a good way to keep abreast of changes to the Mac viewer. As of May 2007, the "Macintosh Users" group has over 1,600 members and active group discussions. Other groups exist for non-English speakers, and for Mac-centric locations in-world.
Macintosh technical support on the SL Forums
The Mac and Linux section in the SL Forums provides Mac users with an avenue for finding more help and discussing issues and questions about Second Life on the Mac. Also see the archived Mac Discussion forum for threads before February 2010.
--
Big edit to this article. Need to double check some of the optimization settings, as I'm writing this from a PC. Simon Nolan 10:45, 11 May 2007 (PDT)
More cleanup, and wondering if this article is relevant.
Did some more cleanup.
Wondering if this article is relevant, as it seems some of the other "Help:" articles have duplicates elsewhere in the wiki. Also, aren't "Help:" articles for Wiki help? Does this need to be moved? Deleted? Simon Nolan 07:10, 13 May 2007 (PDT)