Difference between revisions of "Color and Scripting"

From Second Life Wiki
Jump to navigation Jump to search
m (make colors not hurt the eyes)
m (minor fix)
Line 8: Line 8:
float blue_value;
float blue_value;


vector color;
vector color = <red_value, green_value, blue_value>;


    color.x = red_value;
//  or:
    color.y = green_value;
//        color.x = red_value;
    color.z = blue_value;
//        color.y = green_value;
//        color.z = blue_value;
</lsl>
</lsl>



Revision as of 05:38, 8 January 2014

Using color in LSL scripting is fairly easy. If works by combining values of red, green, and blue light. They are stored like this:

<lsl> float red_value; float green_value; float blue_value;

vector color = <red_value, green_value, blue_value>;

// or: // color.x = red_value; // color.y = green_value; // color.z = blue_value; </lsl>

Each red, green, or blue value can be between 0.0 (no color saturation) to 1.0 (total color saturation). These values are determined by combining the colors as if they were light, not paint. Therefore, the combination of all three in total saturation is white. The combination of all three with no saturation is pitch black. If there is not saturation on two values, and the third is saturated, you get a pure color.

Color Hexadecimal code RGB decimal code for LSL
NAVY #001f3f <0.000, 0.122, 0.247>
BLUE #0074d9 <0.000, 0.455, 0.851>
AQUA #7fdbff <0.498, 0.859, 1.000>
TEAL #39cccc <0.224, 0.800, 0.800>
OLIVE #3d9970 <0.239, 0.600, 0.439>
GREEN #2ecc40 <0.180, 0.800, 0.251>
LIME #01ff70 <0.004, 1.000, 0.439>
YELLOW #ffdc00 <1.000, 0.863, 0.000>
ORANGE #ff851b <1.000, 0.522, 0.106>
RED #ff4136 <1.000, 0.255, 0.212>
MAROON #85144b <0.522, 0.078, 0.294>
FUCHSIA #f012be <0.941, 0.071, 0.745>
PURPLE #b10dc9 <0.694, 0.051, 0.788>
WHITE #ffffff <1.000, 1.000, 1.000>
SILVER #dddddd <0.867, 0.867, 0.867>
GRAY #aaaaaa <0.667, 0.667, 0.667>
BLACK #111111 <0.067, 0.067, 0.067>

Converting Hexadecimal to Vectors

To convert from a hexadecimal values used in CSS or HTML to ones usable in Second Life scripting, first convert the number for the red, green and blue saturation from hexadecimal to decimal, then divide that number by 255. Do bear in mind that 3-digit codes are a shorthand form, so each digit should be doubled (F becomes FF, 4 becomes 44, 0 becomes 00 etc)

Form\Channels Red Green Blue
Hexadecimal FF CC 00
Decimal 255 204 0
Saturation Float 1.0 0.8 0.0

total saturation:

  • hexadecimal: FF
  • decimal: 255
  • float: 1.0

no saturation:

  • hexadecimal: 00
  • decimal: 0
  • float: 0.0

Therefore:

#FF00FF = <1.0,0.0,1.0>

Contributor

FlipperPA Peregrine