User:Strife Onizuka/PrimitiveParamsTable

User:Strife Onizuka/PRIM TEXTUser:Strife Onizuka/PRIM PHYSICSUser:Strife Onizuka/PRIM PHANTOMUser:Strife Onizuka/PRIM TEMP ON REZUser:Strife Onizuka/PRIM MATERIALUser:Strife Onizuka/PRIM SIZEUser:Strife Onizuka/PRIM POSITIONUser:Strife Onizuka/PRIM ROTATIONUser:Strife Onizuka/PRIM ROT LOCALUser:Strife Onizuka/PRIM FLEXIBLEUser:Strife Onizuka/PRIM POINT LIGHTUser:Strife Onizuka/PRIM TEXGENUser:Strife Onizuka/PRIM COLORUser:Strife Onizuka/PRIM GLOWUser:Strife Onizuka/PRIM FULLBRIGHTUser:Strife Onizuka/PRIM BUMP SHINY

V	Flag		Parameters Returned	Scope
27	PRIM_NAME	[ PRIM_NAME,	string name ] name - prim Used to get or set the prim's name. • string name		3 name
28	PRIM_DESC	[ PRIM_DESC,	string description ] description - prim Used to get or set the prim's description. • string description		3 description
9	PRIM_TYPE	[ PRIM_TYPE,	integer flag ] + flag_parameters shape - prim Gets or sets the type of the prim and associated type flag_parameters. • integer flag – PRIM_TYPE_* flag • list flag_parameters – a list consisting of the parameters for flag The values needed for flag_parameters is dependent on flag, please refer to the individual PRIM_TYPE_* articles for additional information. Caveats PRIM_TYPE can only be used with LINK_SET if the object contains 10 or fewer prims. It can only be used with LINK_ALL_OTHERS or LINK_ALL_CHILDREN if the object contains 11 or fewer prims. If there are more prims, the operation will fail and an error will be shouted to DEBUG_CHANNEL. Work around this by looping through the prims with llSetLinkPrimitiveParamsFast. flag Constants Additional Return Values / Flag Parameters PRIM_TYPE_BOX 0 [ integer hole_shape, vector cut, float hollow, vector twist, vector top_size, vector top_shear ] PRIM_TYPE_CYLINDER 1 [ integer hole_shape, vector cut, float hollow, vector twist, vector top_size, vector top_shear ] PRIM_TYPE_PRISM 2 [ integer hole_shape, vector cut, float hollow, vector twist, vector top_size, vector top_shear ] PRIM_TYPE_SPHERE 3 [ integer hole_shape, vector cut, float hollow, vector twist, vector dimple] PRIM_TYPE_TORUS 4 [ integer hole_shape, vector cut, float hollow, vector twist, vector hole_size, vector top_shear, vector advanced_cut, vector taper, float revolutions, float radius_offset, float skew ] PRIM_TYPE_TUBE 5 [ integer hole_shape, vector cut, float hollow, vector twist, vector hole_size, vector top_shear, vector advanced_cut, vector taper, float revolutions, float radius_offset, float skew ] PRIM_TYPE_RING 6 [ integer hole_shape, vector cut, float hollow, vector twist, vector hole_size, vector top_shear, vector advanced_cut, vector taper, float revolutions, float radius_offset, float skew ] PRIM_TYPE_SCULPT 7 [ string map, integer type ] type Flags Style Description PRIM_SCULPT_TYPE_SPHERE 1 Sphere Converge top & bottom, stitch left side to right PRIM_SCULPT_TYPE_TORUS 2 Torus Stitch top to bottom, stitch left side to right PRIM_SCULPT_TYPE_PLANE 3 Plane No stitching or converging PRIM_SCULPT_TYPE_CYLINDER 4 Cylinder Stitch left side to right. PRIM_SCULPT_TYPE_MESH 5 Mesh model See: Mesh PRIM_SCULPT_FLAG_ZZZZZZZZ 63 PRIM_SCULPT_FLAG_ANIMESH 0x20 Animesh Read-only flag to query Animated mesh status. PRIM_SCULPT_FLAG_INVERT 0x40 Invert Render inside out (inverts the normals). PRIM_SCULPT_FLAG_MIRROR 0x80 Mirror Render an X axis mirror of the sculpty. hole_shape Flags Shape PRIM_HOLE_DEFAULT 0x00 Default PRIM_HOLE_SQUARE 0x20 Square PRIM_HOLE_CIRCLE 0x10 Circle PRIM_HOLE_TRIANGLE 0x30 Triangle PRIM_TYPE top_size and client taper conversion Range[1] Top Tapered No Tapering Bottom Tapered Client [-1, 1] 1.0 0.0 -1.0 PRIM_TYPE [0, 2] 0.0 1.0 2.0 LEGACY [0, 1] 0.0 1.0 NA Client < 1.11 [0, 1] 0.0 1.0 NA		3 shape
17	PRIM_TEXTURE	[ PRIM_TEXTURE,	integer face, string texture, vector repeats, vector offsets, float rotation_in_radians ] texture - face Used to get or set the texture settings of a prim's face. • integer face – face number or ALL_SIDES • string texture – a texture in the inventory of the prim this script is in or a UUID of a texture • vector repeats – x and y range from 0.0 to 100, or -0.0 to -100 in 0.01 increments. Negative values flip the texture (z is ignored) • vector offsets – x and y range from -1 to 1 (z is ignored) • float rotation_in_radians – angle in radians Caveats If texture is missing from the prim's inventory and it is not a UUID or it is not a texture then an error is shouted on DEBUG_CHANNEL. If texture is a UUID then there are no new asset permissions consequences for the object. The resulting object develops no new usage restrictions that might have occurred if the asset had been placed in the prims inventory. texture Constants The following constants can (optionally) be used for the texture value: TEXTURE_BLANK, TEXTURE_DEFAULT, TEXTURE_MEDIA, TEXTURE_PLYWOOD and TEXTURE_TRANSPARENT. Examples <lsl>llSetPrimitiveParams([ PRIM_TEXTURE, ALL_SIDES, "5748decc-f629-461c-9a36-a35a221fe21f", <1.0, 1.0, 0.0>, <0.0, 0.0, 0.0>, 0.0 ]); llSetPrimitiveParams([ PRIM_TEXTURE, ALL_SIDES, llGetInventoryName(INVENTORY_TEXTURE, 0), <1.0, 1.0, 0.0>, <0.0, 0.0, 0.0>, 0.0 ]); llSetPrimitiveParams([ PRIM_TEXTURE, 0, TEXTURE_PLYWOOD, <2.0, 5.0, 0.0>, <0.1, 0.2, 0.0>, 1.0 ]);</lsl>		2 texture

User:Strife Onizuka/PRIM TEXTUser:Strife Onizuka/PRIM PHYSICSUser:Strife Onizuka/PRIM PHANTOMUser:Strife Onizuka/PRIM TEMP ON REZUser:Strife Onizuka/PRIM MATERIALUser:Strife Onizuka/PRIM SIZEUser:Strife Onizuka/PRIM POSITIONUser:Strife Onizuka/PRIM ROTATIONUser:Strife Onizuka/PRIM ROT LOCALUser:Strife Onizuka/PRIM FLEXIBLEUser:Strife Onizuka/PRIM POINT LIGHTUser:Strife Onizuka/PRIM TEXGENUser:Strife Onizuka/PRIM COLORUser:Strife Onizuka/PRIM GLOWUser:Strife Onizuka/PRIM FULLBRIGHTUser:Strife Onizuka/PRIM BUMP SHINY

V	Request Format		Parameters Returned	Scope
27	PRIM_NAME	[ PRIM_NAME ]	[ string name ] name - prim Used to get or set the prim's name. • string name		3 name
28	PRIM_DESC	[ PRIM_DESC ]	[ string description ] description - prim Used to get or set the prim's description. • string description		3 description
9	PRIM_TYPE	[ PRIM_TYPE ]	[ integer flag ] + flag_parameters shape - prim Gets or sets the type of the prim and associated type flag_parameters. • integer flag – PRIM_TYPE_* flag • list flag_parameters – a list consisting of the parameters for flag The values that follow after flag, the flag_parameters, are dependent on the value of flag, please refer to the individual PRIM_TYPE_* articles for further information. flag Constants Additional Return Values PRIM_TYPE_BOX 0 [ integer hole_shape, vector cut, float hollow, vector twist, vector top_size, vector top_shear ] PRIM_TYPE_CYLINDER 1 [ integer hole_shape, vector cut, float hollow, vector twist, vector top_size, vector top_shear ] PRIM_TYPE_PRISM 2 [ integer hole_shape, vector cut, float hollow, vector twist, vector top_size, vector top_shear ] PRIM_TYPE_SPHERE 3 [ integer hole_shape, vector cut, float hollow, vector twist, vector dimple] PRIM_TYPE_TORUS 4 [ integer hole_shape, vector cut, float hollow, vector twist, vector hole_size, vector top_shear, vector advanced_cut, vector taper, float revolutions, float radius_offset, float skew ] PRIM_TYPE_TUBE 5 [ integer hole_shape, vector cut, float hollow, vector twist, vector hole_size, vector top_shear, vector advanced_cut, vector taper, float revolutions, float radius_offset, float skew ] PRIM_TYPE_RING 6 [ integer hole_shape, vector cut, float hollow, vector twist, vector hole_size, vector top_shear, vector advanced_cut, vector taper, float revolutions, float radius_offset, float skew ] PRIM_TYPE_SCULPT 7 [ string map, integer type ] type Flags Style Description PRIM_SCULPT_TYPE_SPHERE 1 Sphere Converge top & bottom, stitch left side to right PRIM_SCULPT_TYPE_TORUS 2 Torus Stitch top to bottom, stitch left side to right PRIM_SCULPT_TYPE_PLANE 3 Plane No stitching or converging PRIM_SCULPT_TYPE_CYLINDER 4 Cylinder Stitch left side to right. PRIM_SCULPT_TYPE_MESH 5 Mesh model See: Mesh PRIM_SCULPT_FLAG_ZZZZZZZZ 63 PRIM_SCULPT_FLAG_ANIMESH 0x20 Animesh Read-only flag to query Animated mesh status. PRIM_SCULPT_FLAG_INVERT 0x40 Invert Render inside out (inverts the normals). PRIM_SCULPT_FLAG_MIRROR 0x80 Mirror Render an X axis mirror of the sculpty. hole_shape Flags Shape PRIM_HOLE_DEFAULT 0x00 Default PRIM_HOLE_SQUARE 0x20 Square PRIM_HOLE_CIRCLE 0x10 Circle PRIM_HOLE_TRIANGLE 0x30 Triangle PRIM_TYPE top_size and client taper conversion Range[1] Top Tapered No Tapering Bottom Tapered Client [-1, 1] 1.0 0.0 -1.0 PRIM_TYPE [0, 2] 0.0 1.0 2.0 LEGACY [0, 1] 0.0 1.0 NA Client < 1.11 [0, 1] 0.0 1.0 NA		3 shape
17	PRIM_TEXTURE	[ PRIM_TEXTURE, integer face ]	[ string texture, vector repeats, vector offsets, float rotation_in_radians ] texture - face Used to get or set the texture settings of a prim's face. • integer face – face number or ALL_SIDES • string texture – a texture in the inventory of the prim this script is in or a UUID of a texturea texture in the inventory of the prim this script is in or a UUID of a texture • vector repeats – x and y range from 0.0 to 100, or -0.0 to -100 in 0.01 increments. Negative values flip the texture (z is ignored)x and y range from 0.0 to 100, or -0.0 to -100 in 0.01 increments. Negative values flip the texture (z is ignored) • vector offsets – x and y range from -1 to 1 (z is ignored)x and y range from -1 to 1 (z is ignored) • float rotation_in_radians – angle in radiansangle in radians		2 texture