LlSetTextureAnim

Template:Needs Translation/LSL/de Template:Needs Translation/LSL/es Template:Needs Translation/LSL/el Template:Needs Translation/LSL/he Template:Needs Translation/LSL/it Template:Needs Translation/LSL/ko Template:Needs Translation/LSL/nl Template:Needs Translation/LSL/hu Template:Needs Translation/LSL/no Template:Needs Translation/LSL/da Template:Needs Translation/LSL/sv Template:Needs Translation/LSL/tr Template:Needs Translation/LSL/pl Template:Needs Translation/LSL/pt Template:Needs Translation/LSL/ru Template:Needs Translation/LSL/th Template:Needs Translation/LSL/uk Template:Needs Translation/LSL/zh-Hant

/LSL

SetTextureAnim

llSetTextureAnim

Summary

3/4 Bugs

Function: llSetTextureAnim( integer mode, integer face, integer sizex, integer sizey, float start, float length, float rate );

0.0	Forced Delay
10.0	Energy

Animate the texture on the specified face/faces by setting the texture scale and offset.

• integer	mode	–	Mask of Mode flags
• integer	face	–	face number or ALL_SIDES
• integer	sizex	–	Horizontal frames (ignored for ROTATE and SCALE)
• integer	sizey	–	Vertical frames (ignored for ROTATE and SCALE)
• float	start	–	Start position/frame number (or radians for ROTATE)
• float	length	–	Number of frames to display (or radians for ROTATE)
• float	rate	–	Frames per second, or radians per second when ROTATE is set, or UV coordinates when SMOOTH is set (must not be zero)

If face is ALL_SIDES then the function works on all sides. start supports negative indexes. Frames are numbered from left to right, top to bottom, starting at 0.
If rate is negative, it has the same effect as using the REVERSE flag.^[1]

Specification

Index	Positive	Negative
First	0	-length
Last	length - 1	-1

Indexes

• Positive indexes count from the beginning, the first item being indexed as 0, the last as (length - 1).

• Negative indexes count from the far end, the first item being indexed as -length, the last as -1.

Frames

Frames are sub-rectangles within the texture. A set of frames with 2 horizontal (sizex) and 3 vertical (sizey) means the overall texture is divided into 3 rows of 2 columns of images, each of which is a frame. llSetTextureAnim will animate across these 6 starting with the top left image and going across and down, optionally repeating. If SMOOTH is set, the frames slide smoothly from one to the next across each row but will "jump" from one row to the next, if off, each frame is displayed in turn centered on the face.

Modes		Description
ANIM_ON	0x01	Texture animation is on. This must be set to start the animation, cleared to stop it.
LOOP	0x02	Loop the texture animation.
REVERSE	0x04	Play animation in reverse direction.
PING_PONG	0x08	Play animation going forwards, then backwards.
SMOOTH	0x10	Slide in the X direction, instead of playing separate frames. In both SCALE and ROTATE modes, causes smooth transitions.
ROTATE	0x20	Animate texture rotation. Does not work with SCALE
SCALE	0x40	Animate the texture scale. Does not work with ROTATE

Caveats

• The function silently fails if its face value indicates a face that does not exist.
• If start is out of bounds the script continues to execute without an error message.
• You can only have one texture animation on a prim
  • Calling llSetTextureAnim more than once on a prim will reset the existing animation.
  • Calling llSetTextureAnim again with exact same values will not reset animation (a small difference in rate will suffice).
• You cannot combine ROTATE and SCALE flags.
• sizex & sizey are both limited to a range of 0 to 255
• llSetTextureAnim, when on, shows the texture with 1 repeat in X and Y and 0 rotation and offset.
• Selecting and un-selecting a prim with animation will reset animation from beginning.

Examples

This slides a texture smoothly, along the horizontal U-axis, and loops it when it gets to the end. Note - the texture's rotation for each side affects the apparent motion. So if the texture is rotated 90 degrees by use of the edit box, the texture may not flow in the direction expected.

llSetTextureAnim(ANIM_ON | SMOOTH | LOOP , ALL_SIDES, 1, 1, 1.0, 1.0, 1.0);

This slides a texture smoothly, along the horizontal U-axis, in the opposite direction

llSetTextureAnim(ANIM_ON | SMOOTH | LOOP , ALL_SIDES, 1, 1, 1.0, 1.0, -1.0);

This divides a texture into 64 "cells", 8 across, and 8 down, and flips through them, left to right, top to bottom. This is useful for cell animation.

llSetTextureAnim( ANIM_ON | LOOP, ALL_SIDES, 8, 8, 0.0, 64.0, 6.4 );

This rotates a texture counter-clockwise at 2 revolutions per second. Change the last value to -2*TWO_PI to rotate clockwise.

llSetTextureAnim(ANIM_ON | SMOOTH | ROTATE | LOOP, ALL_SIDES,1,1,0, TWO_PI, 2*TWO_PI);

This scales a texture larger and smaller.

llSetTextureAnim(ANIM_ON | SMOOTH | SCALE | PING_PONG | LOOP, ALL_SIDES, 1, 1, 1.0, 3.0, 2.0);

This turns off all texture animations

llSetTextureAnim(FALSE, ALL_SIDES, 0, 0, 0.0, 0.0, 1.0);

This toggles a looping animation to make it stop at a specific frame.

integer textureIsBeingAnimated;

default
{
    touch_start(integer num_detected)
    {
        if (textureIsBeingAnimated)
            llSetTextureAnim(ANIM_ON | LOOP, ALL_SIDES, 1, 5, 0.0, 0.0, 1.0);
        else
            llSetTextureAnim(ANIM_ON | SMOOTH, ALL_SIDES, 1, 5, 5.0, 1.0, 1.0);

        // toggle back and forth between TRUE (1) and FALSE (0)
        textureIsBeingAnimated = !textureIsBeingAnimated;
    }
}

Notes

Texture animation is a property of the prim (i.e., you can remove the script that started the animation, and the prim will remember the settings anyway.) Note, though, that as of Jan 2009, texture animation is still one of the prim properties that is lost when using the rezzed in world copy method of shift-drag. Originally brought up in VWR-640, it got its own issue in SVC-3925

An online-tool for rough and ready conversion of moving gifs to animated textures is here: http://www.peregrinesalon.com/anim/ (link valid as of August 27, 2010.)

See Also

Functions

•

llSetLinkTextureAnim

Articles

•

Negative Index

Deep Notes

History

• llSetTextureAnim Added in SL 0.4.0^[2]

Footnotes

1. ^ Though if rate is negative and the REVERSE flag is used, they cancel each other out.
2. ^ Early release notes were not very accurate or thorough, they sometimes included information about features added in previous releases or failed to include information about features added in that release.

Signature
function void llSetTextureAnim( integer mode, integer face, integer sizex, integer sizey, float start, float length, float rate );